Preparation of flower-like molybdenum disulfide for solid-phase extraction of N-nitrosoamines in environmental water samples

In this paper, a flower-like molybdenum disulfide material was prepared by hydrothermal method and was first used as adsorbents in the solid-phase extraction process for enriching N-nitrosoamines. Molybdenum disulfide exhibited three-dimensional petal-like microspheres with about 500 nm in diameter. The relevant analyte extraction and elution parameters (sample volumes, solution pH, washing solvents, elution solvents, and elution volumes) were optimized to improve the solid-phase extraction efficiency. The solid-phase extraction process coupled with high-performance liquid chromatography-tandem mass spectrometry for determining N-nitrosoamines in environmental water samples was established. The limits of detection were in the range of 0.01–0.05 ng/mL. The satisfactory recoveries (68.9–106.1%) were obtained at three different spiked concentrations (2, 5, and 8 ng/mL) in water samples, and the relative standard deviations were between 1.96 and 8.38%. This proposed method not only showed high sensitivity and good reusability but also provided a new adsorbent for enriching trace N-nitrosoamines in environmental water samples.     

零价铁去除水中(类)金属(含氧)离子技术发展的黄金十年(2011-2021)

应用零价铁(ZVI)去除水中(类)金属(含氧)离子是近年来研究的热点。在ZVI除污染过程中,同步提升ZVI除污的反应活性与电子效率对该技术进一步推广应用至关重要。本文综述了近十年(2011-2021年)ZVI的提升技术,主要涉及硫化、外加弱磁场、投加Fe²⁺、投加氧化剂以及其他新型技术。从不同体系广谱研究以及单一体系具体研究的角度,系统分析了这些技术对ZVI去除含氧水体中(类)金属(含氧)离子的反应活性、去除容量、电子效率的提升表现及作用机制。最后,对ZVI技术未来的研究方向作出了展望,以期促进ZVI技术的进一步完善与发展。本文有望为增强零价铁去除污染物的实际效能提供新的探索方向并完备相关理论基础。     

Syntheses and structural characterizations of Fe4S4 cubane-like cluster compounds containing cycloalkylthiolate ligands

In a reaction system consisting of FeCl₂, tetrathiometallate and cycloalkylthiolate, two Fe₄S₄ cubanelike cluster compounds were obtained with the following crystallographic data: (PhCH₂NMe₃)₂ [ Fe₄S₄ (SC₅H₉)₄] (I), monoclinic space groupP2₁/c,a = 1.632 7(4),b=1.122 9(3),c = 2. 802 5(10) nm, β= 94.63(2)°, Z=4, andR= 0.074; (Et₄N)₂[F₄S4(SC₆H_lI)₄] (II), tetragod space group ,a = l.167 05(9),b = 1.167 06(2),c = 2.063 26(5) nm,Z = 2, D_obs = 1. 28 g/cm³, andR = 0. 078. The participation of cycloalkylthiolate ligand does not obviously arouse the change of the Fe₄S₄ core structure. Meanwhile, the influence of the cation on the structural symmetry of the Fe₄S₄ cluster dianion is also discussed. Project supported by the National Natural Science Foundation of China and the Climbing Program Foundation of China.     

Peptide sequence mediated self-assembly of molybdenum blue nanowheel superstructures

The precise control over the formation of complex nanostructures, e.g. polyoxometalates (POMs), at the sub-nanoscale is challenging but critical if non-covalent architectures are to be designed. Combining biologically-evolved systems with inorganic nanostructures could lead to sequence-mediated assembly. Herein, we exploit oligopeptides as multidentate structure-directing ligands via metal-coordination and hydrogen bonded interactions to modulate the self-assembly of POM superstructures. Six oligopeptides (GH, AH, SH, G₂H, G₄H and G₅H) are incorporated into the cavities of Molybdenum Blue (MB) POM nanowheels. It is found that the helicity of the nanowheel can be readily switched (Δ to Λ) by simply altering the N-terminal amino acid on the peptide chain rather than their overall stereochemistry. We also reveal a delicate balance between the Mo-coordination and the hydrogen bonds found within the internal cavity of the inorganic nanowheels which results in the sequence mediated formation of two unprecedented asymmetrical nanowheel frameworks: {Mo₁₂₂Ce₅} and {Mo₁₂₆Ce₄}.

Peptide sequence can be used to control the self-assembly and structures of nanoscale molybdenum blue polyoxometalate (POM) wheel-shaped clusters.     

Syntheses and structural characterizations of Fe_4S_4 cubane-like cluster compounds containing cycloalkylthiolate ligands

In a reaction system consisting of FeCl2,tetrathiometallate and cycloalkylthiolate,two Fe4S4 cubane-like cluster compounds were obtained with the following crystallographic data:(PhCH2NMe32[Fe4S4 (SC5H9)4](Ⅰ),monoclinic space group P21/c,a=1.6327(4),6=1.1229(3),c=2.802 5( 10) nm,β=94.63(2)°,Z=4,and R=0.074; (Et4N)2[Fe4S4(SC6H11)4](Ⅱ),tetragonal space group I42m,a=1.16705(9),b=1.167 06(2),c=2.063 26(5) nm,Z=2,Dabs=1.28 g/cm3,and R=0.078 The participation of cy-cloalkylthiolate ligand does not obviously arouse the change of the Fe4S4 core structure.Meanwhile,the influence of the cation on the structural symmetry of the Fe4S4 cluster dianion is also discussed.     

Influence of Pretreatment Conditions on Methane Aromatization Performance of Mo／HZSM—5 and Mo—Cu／HZSM—5 Catalysts

Mo/HZSM-5 is a good catalyst for methane aromatization, and the reaction performance of Mo/HZSM-5 and Cu modified Mo/HZSM-5 catalysts under various pretreatment conditions has been studied. The results indicate that the catalyst presented a distinguished catalytic activity, benzene selectivity and a high stability when the bed temperature was raised in N2 atmosphere.     

Mammalian reovirus core protein micro 2 initiates at the first start codon and is acetylated

Mammalian reovirus is an enteric virus that contains a double-stranded RNA genome. The genome consists of ten RNA segments that encode eight structural and three non-structural proteins. The structural proteins form a double-layered structure. The innermost layer, called the core, consists of five proteins (lambda1, lambda2, lambda3, micro 2, and sigma2). Protein lambda3 is the RNA-dependent RNA polymerase (RdRp) and micro 2 is thought to be an RdRp cofactor. Translation of most reovirus proteins is known to commence at the first start codon. However, the translation initiation site of the viral core protein micro 2, encoded by the M1 RNA segment, has been in dispute. Although the theoretical molecular weight of micro 2 is 83 267 Da the actual molecular weight is unknown because micro 2 runs aberrantly in SDS-PAGE and has resisted characterization by Edman degradation, indicating that the amino terminus is post-translationally modified. In this study, we used proteolysis coupled with MALDI-Qq-TOFMS to determine that translation of micro 2 initiates at the first AUG codon, that its actual molecular weight approximates the theoretical value of 83 kDa, that the amino terminal methionine residue is removed, and that the next amino acid (alanine) is post-translationally acetylated.     

Synthesis and Insulin—sensitizing Activity of a Series of 2—Benzyl—1,3—dicarbonyl Derivatives

A series of 2-benzyl-1,3-dicabonyl derivatives was synthesized.Their insulin-sensitizing activity was evaluated in 3T3-L1 preadipocyte cells.Compounds3,26 and 27 were found to possess strong insulin-sensitizing activity in vitro and were selected for further hypoglycemic evaluation in vivo.     

Pharmacokinetic analysis of plasma bicyclol by liquid chromatography–tandem mass spectrometry

Bicyclol is a synthetic drug widely used to treat chronic hepatitis B. This study aimed to develop a selective, sensitive and high‐throughput liquid chromatography–tandem mass spectrometric method for the detection of bicyclol in human plasma. Bicyclol was detected using a multiple reaction monitoring mode, with ammonium adduct ions (m/z 408.2) as the precursor ion and the [M‐CH₃]⁺ ion (m/z 373.1) subjected to demethylation as the product ion. Chromatographic separation was achieved using a Zobax Eclipse XDB‐C₁₈ column with a gradient elution and a mobile phase of 2 mm ammonium formate and acetonitrile. Bicyclol was extracted from plasma matrix by precipitation. A linear detection response was obtained for bicyclol ranging from 0.500 to 240 ng/mL, and the lower limit of quantification was 0.500 ng/mL. The intra‐ and inter‐day precisions were all ≤7.4%, and the accuracies were within ±6.0%. The extraction recovery was >95.9%, and the matrix effects were between 96.0% and 108%. Bicyclol was found to be unstable in human plasma at room temperature, but the degradation was minimized by conducting sample collection and preparation in an ice bath. The validated method was successfully applied to investigate the pharmacokinetics of bicyclol tablets in six healthy Chinese volunteers.     

Field‐amplified sample injection combined with capillary electrophoresis for the simultaneous determination of five chlorophenols in water samples

A sensitive method of CZE‐ultraviolet (UV) detection based on the on‐line preconcentration strategy of field‐amplified sample injection (FASI) was developed for the simultaneous determination of five kinds of chlorophenols (CPs) namely 4‐chlorophenol (4‐CP), 2‐chlorophenol (2‐CP), 2,4‐dichlorophenol (2,4‐DCP), 2,4,6‐trichlorophenol (2,4,6‐TCP), and 2,6‐dichlorophenol (2,6‐DCP) in water samples. Several parameters affecting CZE and FASI conditions were systematically investigated. Under the optimal conditions, sensitivity enhancement factors for 4‐CP, 2‐CP, 2,4‐DCP, 2,4,6‐TCP, and 2,6‐DCP were 9, 27, 35, 43, and 43 folds, respectively, compared with the direct CZE, and the baseline separation was achieved within 5 min. Then, the developed FASI‐CZE‐UV method was applied to tap and lake water samples for the five CPs determination. The LODs (S/N = 3) were 0.0018–0.019 µg/mL and 0.0089–0.029 µg/mL in tap water and lake water, respectively. The values of LOQs in tap water (0.006–0.0074 µg/mL) were much lower than the maximum permissible concentrations of 2,4,6‐TCP, 2,4‐DCP, and 2‐CP in drinking water stipulated by World Health Organization (WHO) namely 0.3, 0.04, and 0.01 µg/mL, respectively, and thereby the method was suitable to detect the CPs according to WHO guidelines. Furthermore, the method attained high recoveries in the range of 83.0–119.0% at three spiking levels of five CPs in the two types of water samples, with relative standard deviations of 0.37–8.58%. The developed method was proved to be a simple, sensitive, highly automated, and efficient alternative to CPs determination in real water samples.