Parasitic-aware RF circuit design and optimization

RF circuit synthesis techniques based on particle swarm optimization and adaptive simulated annealing with tunneling are described, and comparisons of parasitic-aware designs of an RF distributed amplifier and a nonlinear power amplifier are presented. Synthesized in 0.35-/spl mu/m digital CMOS using a single 3.3-V power supply, the designs provide an 8-dB gain and 8-GHz bandwidth for a four-stage distributed amplifier, and 1.2-W output power with 55% drain efficiency at 900 MHz for a three-stage power amplifier. A standard circuit simulator, HSPICE or SPECTRE, embedded in an optimization loop is used to evaluate cost functions. The proposed design and optimization methodology is computationally efficient and robust in searching complex multidimensional design spaces.     

Over GHz electrical circuit model of a high-density multiple line grid array (MLGA) interposer

The multiple line grid array (MLGA) interposer was recently introduced as a future high-density high-speed bonding method. In this paper, we introduce an electrical model and high-frequency characteristics of the MLGA interposer. The high-frequency electrical model was extracted from microwave S-parameter measurements up to 20 GHz as well as from fundamental microwave network analysis. For the parameter fitting process during model extraction, an optimization method was used. Several different types of MLGA interposers were designed, assembled and tested. The test vehicles contained coplanar waveguides, probing pads and an MLGA interposer structure. The height of the MLGA, the conductor shape inside the MLGA, and the dielectric insulator of the MLGA were varied. From the model, an MLGA with a height of 0.4 mm and a polymer dielectric insulator was found to have 203 pH of self inductance, 49 pH of mutual inductance with the nearest ground conductor line, and 186 fF of mutual capacitance. By reducing the height of the MLGA and by using an insulator with a lower dielectric constant, parasitic inductance and capacitance is further reduced. TDR/TDT simulation and measurement showed the validity of the extracted model parameters of the MLGA interposer. Circuit simulation based on the extracted model revealed that the MLGA interposer could be successfully used for microwave device packages up to 20 GHz and for high-speed digital device packages with a clock cycle up to 5 GHz.     

Response of line focus acoustic microscope to specimen containing a subsurface crack

A numerical model is presented to calculate V(z) and V(x, z) curves for a line focus acoustic microscope and a specimen containing a subsurface crack. In this model, a Gaussian beam which is tracked through the lens into the coupling fluid and into the specimen, interacts with the crack. The numerical approach is based on the solution of singular integral equations by the boundary element method. The system of singular integral equations follows from the conditions at the interface of the coupling fluid and the specimen and on the faces of the crack. An electromechanical reciprocity relation is used to express the voltage at the terminals of the microscope's transducer in terms of the calculated incident and back-scattered fields. V(z) and V(x, z) curves are presented for various locations and orientations of the crack. The characteristic features of the V(z) and particularly the V(x, z) curves, as they relate to crack configuration, are discussed in some detail.     

Optical characterization of CdTe/ZnSe fractional monolayer structures grown by atomic layer epitaxy

Luminescence properties of CdTe/ZnSe fractional monolayer grown by atomic layer epitaxy have been investigated. To investigate the origin of the highly efficient luminescence, various optical spectroscopic methods such as, photoluminescence (PL), temporal/spatial resolved PL, temperature dependence PL, and excitation power dependence PL have been used. It is found that structural inhomogeneities affect dominant influence on the line width and line shape of luminescence. The luminescence intensity greatly enhanced by the localization of exciton at the disorder induced localized states.     

On the analysis of the Gerber-Shiu discounted penalty function for risk processes with Markovian arrivals

In this paper, we consider an insurance risk model governed by a Markovian arrival claim process and by phase-type distributed claim amounts, which also allows for claim sizes to be correlated with the inter-claim times. A defective renewal equation of matrix form is derived for the Gerber-Shiu discounted penalty function and solved using matrix analytic methods. The use of the busy period distribution for the canonical fluid flow model is a key factor in our analysis, allowing us to obtain an explicit form of the Gerber-Shiu discounted penalty function avoiding thus the use of Lundberg’s fundamental equation roots. As a special case, we derive the triple Laplace transform of the time to ruin, surplus prior to ruin, and deficit at ruin in explicit form, further obtaining the discounted joint and marginal moments of the surplus prior to ruin and the deficit at ruin.     

AC hot-carrier effects in MOSFETs with furnaceN2O-nitrided gate oxides

AC hot-carrier effects in n-MOSFETs with thin (~85 Å) N₂O-nitrided gate oxides have been studied and compared with control devices with gate oxides grown in O₂. Results show that furnace N₂O-nitrided oxide devices exhibit significantly reduced AC-stress-induced degradation. In addition, they show weaker dependences of device degradation on applied gate pulse frequency and pulse width. Results suggest that the improved AC-hot-carrier immunity of the N₂O-nitrided oxide device may be due to the significantly suppressed interface state generation and neutral electron trap generation during stressing     

Suppressed beta-hydride elimination in palladium-catalyzed cascade cyclization-coupling reactions: an efficient synthesis of 3-arylmethylpyrrolidines

[formula: see text] A novel type of palladium-catalyzed cascade cyclization-coupling reaction that proceeds with suppressed beta-hydride elimination has been found. One of the N-sulfonyl oxygens is suggested to coordinatively stabilize an alkylpalladium intermediate, thus preventing the intermediate from the usual beta-elimination. This is the first sequential palladium-catalyzed coupling reaction where the Suzuki and Heck reactions can compete. The reaction provides an efficient synthetic route to 4-methylene-3-arylmethylpyrrolidines, which are not readily available by other routes.     

Polyarylate–polystyrene block copolymer from macro-azoinitiator: Synthesis and its thermal properties

A macro-azoinitiator containing polyarylate segment and azo group was prepared by the solution polycondensation of azobiscyanopentanoyl chloride and hydroxy-terminated polyarylates having viscosity-average molecular weights of 6200, 8100, and 12 400. These macro-azoinitiators were used in the radical polymerization of styrene to synthesize polyarylate-polystyrene block copolymers. Thermal properties measured by the differential scanning calorimetry indicated the phase separated morphology of the block copolymers except at low molecular weight of the block constituents. © 1993 John Wiley & Sons, Inc.     

Direct microbial conversion

Applied Biochemistry and Biotechnology - Process development is reviewed for ethanol production from cellulosic biomass via direct microbial conversion (DMC). Experimental data addressing cellulase...