New efficient designs for XOR and XNOR functions on the transistorlevel

Two new methods are proposed to implement the exclusive-OR and exclusive-NOR functions on the transistor level. The first method uses non-complementary signal inputs and the least number of transistors. The other one improves the performance of the prior method but two more transistors are utilized. Both of them have been fully simulated by HSPICE on a SUN SPARC 2 workstation     

Effects of hot carrier induced interface state generation insubmicron LDD MOSFET's

A two-dimensional numerical simulation including a new interface state generation model has been developed to study the performance variation of a LDD MOSFET after a dc voltage stress. The spatial distribution of hot carrier induced interface states is calculated with a breaking silicon-hydrogen bond model. Mobility degradation and reduction of conduction charge due to interface traps are considered. A 0.6 μm LDD MOSFET was fabricated. The drain current degradation and the substrate current variation after a stress were characterized to compare the simulation. A reduction of the substrate current at V_g ≃0.5 V_d in a stressed device was observed from both the measurement and the simulation. Our study reveals that the reduction is attributed to a distance between a maximum channel electric field and generated interface states     

Damage and strain in pseudomorphic vs relaxed GexSi1−x layers on Si(100) generated by Si ion irradiation

We compare both the strain and damage that 100 keV Si irradiation at room temperature introduces in pseudomorphic and relaxed Ge_xSi_1−x films grown on Si(100) substrates. The ion range is such that the Si/Ge_xSi_1−x interface is not significantly damaged. The amount of damage produced in pseudomorphic and relaxed Ge_xSi_1−x layers of similar x for irradiation doses up to 2.5 × 10¹⁴ Si/cm² is the same, which proves that a pre-existing uniform strain does not noticeably affect the irradiation-induced damage. However, the irradiation-induced strain does depend on the pre-existing strain of the samples. Possible interpretations are discussed. On leave from Inst. voor Kern en Stralingsfysika, Catholic University of Leuven, Belgium.     

Dependence of critical current density on microstructure and processing of high-Tc superconductors

Microstructural origins for reduced weak-link behavior in high-J_c melt-processed YBCO, spray pyrolyzed thick films of Tl-1223, metallic precursor Y-124 polycrystalline powder-in-tube (PIT) wires and PIT Bi-2212/2223 are discussed. Since the materials studied are the highest J_c, polycrystalline, high-T_c superconductors fabricated worldwide, the results provide important guidelines for further improvements in superconducting properties, thereby enabling practical applications of these materials. It is found that strongly linked current flow within domains of melt-processed 123 occurs effectively through a single crystal path. In c-axis oriented, polycrystalline Tl-1223 thick films, local in-plane texture has been found to play a crucial role in the reduced weak-link behavior. Formation of “colonies” of grains with a common c-axis and modest in-plane misorientation was observed. Furthermore, a colony boundary in general has a varying misorientation along the boundary. Large regions comprised primarily of low angle boundaries were observed. Percolative transport through a network of such small angle boundaries appears to provide the nonweak-linked current path. Although powder-in-tube BSCCO 2212 and 2223 also appear to have a “colony” microstructure, there are some important differences. Colonies in BSCCO consist of stacks of grains with similar c-axis orientation in contrast to colonies in Tl-1223 films where few grains are stacked on top of one another. Furthermore, most grains within a colony in BSCCO have the same lateral dimensions as that of the colony, resulting largely largely in “twist” boundaries. Further microstructural characterization of high-J_c PIT 2212 and 2223 is currently underway. In the case of Y-124 wires, weak macroscopic in-plane texture is found. Additional measurements are underway to determine if a sharper, local in-plane texture also exists. It is found that in three of the four types of superconductors studied, reduced weak-link behavior can be ascribed to some degree of biaxial alignment between grains, either on a “local” or a “global” scale.     

Error monitoring issues for common channel signaling

Motivated by field data which showed a large number of link changeovers and incidences of link oscillations between in-service and out-of-service states in common channel signalling (CCS) networks, a number of analyses of the link error monitoring procedures in the SS7 protocol were performed by the authors. This paper summarizes the results obtained thus far and include the following: (a) results of an exact analysis of the performance of the error monitoring procedures under both random and bursty errors; (b) a demonstration that there exists a range of error rates within which the error monitoring procedures of SS7 may induce frequent changeovers and changebacks; (c) an analysis of the performance of the SS7 level-2 transmission protocol to determine the tolerable error rates within which the delay requirements can be met; (d) a demonstration that the tolerable error rate depends strongly on various link and traffic characteristics, thereby implying that a single set of error monitor parameters will not work well in all situations; and (e) some recommendations on a customizable/adaptable scheme of error monitoring with a discussion on their implementability. These issues may be particularly relevant in the presence of anticipated increases in SS7 traffic due to widespread deployment of advanced intelligent network (AIN) and personal communications service (PCS) as well as for developing procedures for high-speed SS7 links currently under consideration by standards bodies     

P-N double quantum well resonant interband tunneling diode withpeak-to-valley current ratio of 144 at room temperature

The current-voltage characteristics of the P-N double quantum well resonant interband tunneling (RIT) diodes in InAlAs-InGaAs system have been improved in this letter. The peak-to-valley current ratio (PVCR) is as high as 144 at room temperature. As we know, this is the highest room temperature PVCR ever reported in any tunneling devices. Moreover, the influence of the central barrier thickness varying from 10 Å to 30 Å on the device characteristics is also studied     

Performance of trellis coded-8PSK with cochannel interference

The performance of trellis coded-8PSK in the presence of cochannel interference is analyzed and compared with the performance of uncoded QPSK. The analytical expressions are derived and supported by simulating the bit error rate performance of different TC-8PSK systems. The analytical and simulation results show that TC-8PSK is slightly more robust to cochannel interference than uncoded QPSK     

YAG脉冲激光器快速连通保护系统

本文阐述了ＹＡＧ脉冲激光器的一种快速连通保护系统，利用大功率二极管作为连通故障信号检出的关键元件，采用了可控硅与继电器双重保护，使得整个保护系统既快速可靠，又简便适用。     

MNLS inverse discriminates between neuronal activity on oppositewalls of a simulated sulcus of the brain

The minimum-norm least-squares (MNLS) inverse for magnetic field measurements is applied to a representation of a sulcus of the human brain, where one or both walls have regions of neuronal activity. Simulations indicate that the magnetic source image (MSI) is largely confined to the appropriate wall of the sulcus, even for a depth of 4 cm where the distance between walls is only 3 mm. Two nearly oppositely oriented dipoles located 3 mm apart are found to be distinguished. Influences on the quality of the MSI by measurement noise and inaccuracy in determining the image surface are discussed in detail     

Hybrid switching and p-routing for optical burst switching networks

One promising switching technology for wavelength-division multiplexing optical networks is optical burst switching (OBS). However, there are major deficiencies of OBS. (1) The delay offset between a control message and its corresponding data burst is based on the diameter of a network. This affects network efficiency, quality-of-service, and network scalability.( 2) OBS adopts one-way resource reservation scheme, which causes frequent burst collision and, thus, burst loss. We address the above two important issues in OBS. In particular, we study how to improve the performance of delay and loss in OBS. To reduce the end-to-end delay, we propose a hybrid switching scheme. The hybrid switching is a combination of lightpath switching and OBS switching. A virtual topology design algorithm based on simulated annealing to minimize the longest shortest path through the virtual topology is presented. To minimize burst collision and loss, we propose a new routing algorithm, namely, p-routing, for OBS network. The p-routing is based on the wavelength available probability. A path that has higher available probability is less likely to drop bursts due to collision. The probability-based p-routing can reduce the volatility, randomness, and uncertainty of one-way resource reservation. Our studies show that hybrid switching and p-routing are complementary and both can dramatically improve the performance of OBS networks.