石墨相氮化碳材料在样品前处理中的研究进展

作为一种新型非金属材料,石墨相氮化碳以其独特的优点,如简单的制备方法、优良的化学及热稳定性、良好的生物兼容性和无毒性等,受到越来越多的关注。石墨相氮化碳及其复合材料目前已被广泛应用于电催化、光催化、生物成像等领域。由于具有大的比表面积,同时又是富电子的疏水材料,石墨相氮化碳相关材料被认为是一种理想的样品前处理吸附剂。该文探讨了近年来石墨相氮化碳及其复合材料作为固相萃取、分散固相萃取、磁性固相萃取、固相微萃取吸附剂在样品前处理中的应用,并对未来的发展趋势和应用前景进行了展望,以期为相关领域的研究提供帮助。     

悬浮固化-分散液液微萃取-液相色谱-串联质谱测定纺织废水中磷系阻燃剂

建立了悬浮固化-分散液液微萃取结合液相色谱-串联质谱测定纺织废水中5种痕量磷系阻燃剂的方法。通过对萃取过程中萃取剂、分散剂的种类与体积、盐浓度、溶液pH值等对萃取效率的影响因素优化,确立了最佳萃取条件。采用了密度小于水的十一烷醇（400 μL）为萃取剂,甲醇（300 μL）为分散剂,控制溶液pH值在6~9之间,NaCl添加量为2 g,萃取时间为涡旋2 min。在优化的萃取条件下,该方法在2~100 μg/L均有良好的线性关系,相关系数大于0.995,除二（2,3-二溴丙基）磷酸酯（BIS）的检出限为5 μg/L外,三（2-氯乙基）磷酸酯（TCEP）、三（1,3-二氯-异丙基）磷酸酯（TDCP）、三（1-氮丙啶基）氧化膦（TEPA）和三（2,3-二溴丙基）磷酸酯（TRIS）的检出限均为2 μg/L。后整理、染色和印花等实际废水样品加标试验表明,方法的平均回收率为71.6%~114.5%,RSD为2.7%~11.2%（n=6）。对11个样品进行检测,其中3个废水样品检出TCEP与TDCP化合物,含量为2.6~3.4 μg/L。本方法简单,快速,灵敏度好且环保绿色,能够对纺织废水中的5种痕量磷系阻燃剂进行准确的定性与定量检测。     

金属串配合物[MoMoCo(npo)4(NCS)2]的配位结构及其与电场的关系

应用密度泛函理论B3LYP方法研究了具有分子导线潜在应用的金属串配合物[MoMoCo(npo)4(NCS)2](npo=1,8-萘基-2-酮)的配位结构及其受电场作用的影响。配位方式记为(n,m),其中n、m分别表示4个赤道配体npo^-的O与Co和Mo配位的个数:n=0,1,2,3,4;m=4,3,2,1,0。结果表明:(1)零电场下,基态能量高低为(0,4)>(4,0)>(3,1)≈(1,3)>(2,2),5种配位方式均可稳定存在且互为竞争态。Z方向偶极矩μ(Z)值大小为(0,4)(+)>(1,3)(+)>(2,2)(-)>(3,1)(-)>(4,0)(-)(+、-表示μ(Z)值的正负,与Z方向相同即为正,相反即为负),4个npo^-趋向越一致能量越高极性越大。(2)Mo-Mo具有四重键,键长随μ(Z)值减小而减小,而Mo-Co键长则相反。随μ(Z)值减小前线轨道中πNCS(1)轨道能降低,π'NCS(2)轨道能升高。(3)Z方向电场作用下,除(0,4)外所有配位方式的Mo1-N8键显著增长,结构不稳定。(4)电场作用下前线轨道能级交错,μ(Z)为正值的(0,4)、(1,3)的能隙E_LUMO-HOMO在-Z方向电场中降低更显著,μ(Z)为负值的(2,2)、(3,1)和(4,0)的能隙在Z方向电场中降低更显著。分子极性越大,随电场强度增强能隙降低越显著,分子导电性可能越好。(0,4)、(3,1)和(4,0)可能具有整流效应,但(3,1)和(4,0)的稳定性较低。     

稀土(Gd3+,La3+)对Eu(p-MOBA)3phen/PMMA荧光及温敏特性的影响

以稀土氧化物(Eu_2O_3,Gd_2O_3,La_2O_3)、对甲氧基苯甲酸(p-MOBA)、菲咯啉(phen)为原料制备了不同稀土离子(Gd~(3+),La~(3+))掺杂的Eu(p-MOBA)_3phen探针分子。将所合成的探针分子与甲基丙烯酸甲酯(MMA)混合,以过氧化苯甲酰(BPO)为引发剂引发聚合,制得不同稀土(Gd~(3+),La~(3+))掺杂的Eu(p-MOBA)_3phen/PMMA温敏漆样品。利用扫描电镜、紫外-可见吸收光谱、红外光谱和荧光光谱对探针分子的形貌、结构、发光性能及温敏漆的荧光温度猝灭特性进行表征。红外光谱、紫外可见吸收光谱及扫描电镜能谱分析表明,Eu~(3+)与配体p-MOBA、phen成功配位,且掺入的稀土离子(Gd~(3+),La~(3+))未改变Eu(p-MOBA)_3phen结构,说明掺入的稀土离子(Gd~(3+),La~(3+))部分取代了Eu~(3+)。荧光光谱表明,稀土离子(Gd~(3+),La~(3+))的掺入对Eu(p-MOBA)_3phen的发光均具有增益作用,并且相应的温敏漆在50～100℃温度范围内都具有良好的荧光温度猝灭特性。而且相比于镧掺杂的Eu(p-MOBA)_3phen/PMMA,钆掺杂的Eu(p-MOBA)_3phen/PMMA具有更强的荧光发射和更高的测温灵敏度。可见,不同的稀土(Gd~(3+),La~(3+))对Eu(p-MOBA)_3phen/PMMA的荧光及温敏特性影响是不同的。     

Thermal studies of novel molecular perovskite energetic material (C6H14N2)[NH4(ClO4)3]

(C6H(14)N2)[NH4(ClO4)3] is a newly developed porous hybrid inorganic-organic framework material with easy access and excellent detonation performances,however,its thermal properties is still unclear and severely hampered further applications.In this study,thermal behaviors and non-isothermal decomposition reaction kinetics of(C6H(14)N2)[NH4(ClO4)3] were investigated systematically by the combination of differential scanning calorimetry(DSC) and simultaneous thermal analysis methods.In-situ FTIR spectroscopy technology was applied for investigation of the structure changes of(C6H(14)N2) NH4(ClO4)3]and some selected referents for better understanding of interactions between different components during the heating process.Experiment results indicated that the novel molecular perovskite structure renders(C6H(14)N2)[NH4(ClO4)3] better thermal stability than most of currently used energetic materials.Underhigh temperature s,the stability of the cage skeleton constructed by NH4^+and ClO4^-ions determined the decomposition process rather than organic moiety confined in the skeleton.The simple synthetic method,good detonation performances and excellent thermal properties make(C6H(14)N2)[NH4(ClO4)3] an ideal candidate for the preparation of advanced explosives and propellants.     

化学能转化成电能的实验设计

以常见的铜锌原电池反应为例,设计了一组对比实验装置,即化学反应装置与原电池装置。以化学反应装置中的能量变化为依据,展示了化学反应中释放出的能量具体形式为“热”与“功”;通过与原电池装置的比较,证明原电池实验装置中的“热”转化为了电能。     

科研转化的综合化学实验:银纳米粒子的制备及其催化反应动力学测量

设计了一个包含胶体化学方法制备金属纳米粒子及其作为异相催化剂催化氧化还原反应的动力学过程等内容的本科生综合化学实验。首先采用晶种生长法合成了不同尺寸的球状和片状银纳米粒子,然后经过离心纯化后作为异相催化剂催化硼氢化钠还原4-硝基苯酚的反应,研究了催化反应动力学过程,分析了催化反应的表观反应速率常数和催化剂的活性。本实验可以锻炼学生制备纳米材料和跟踪反应动力学进程的能力,使学生进一步理解异相催化反应机理、熟悉光谱仪器的应用。     

同位素稀释高效液相色谱-串联质谱法测定水体、底泥、鱼及虾中氯硝柳胺残留量

建立了水体、底泥、鱼体自然比例带皮肌肉和虾肌肉中氯硝柳胺(NIC)残留量测定的同位素稀释高效液相色谱-串联质谱(HPLC-MS/MS)法。水样经碱化后以乙酸乙酯提取,其他样品采用0.1%氨水乙腈提取,C_(18)粉进行样品净化。以乙腈-水为流动相,流速为0.3 mL/min,采用Thermo Hypersil Gold C_(18)(150 mm×2.1 mm,5μm)色谱柱进行分离,氯硝柳胺稳定同位素标记物(氯硝柳胺-~(13)C_6)为内标,选择反应监测(SRM)模式扫描,内标法定量。结果表明氯硝柳胺在0.2～200μg/L范围内呈良好线性关系,相关系数(r~2)不小于0.999 5。空白水样在2.5、25、250 ng/L加标水平下的平均回收率为90.5%～109%,相对标准偏差(RSD)为3.2%～11%,检出限(LOD)为1.0 ng/L,定量下限(LOQ)为2.5 ng/L;空白底泥、黄颡鱼自然比例带皮肌肉和克氏原螯虾肌肉在0.5、5.0、50μg/kg加标水平下的平均回收率分别为89.4%～113%、92.8%～110%和94.1%～107%,RSD分别为4.6%～12%、2.8%～11%和3.2%～9.3%,LOD均为0.2μg/kg,LOQ均为0.5μg/kg。该方法的灵敏度、准确度和选择性高,适用于实际水产养殖环境水体、底泥、鱼和虾中氯硝柳胺的残留分析。     

Deciphering an Abnormal Layered‐Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode

Demands for large‐scale energy storage systems have driven the development of layered transition‐metal oxide cathodes for room‐temperature rechargeable sodium ion batteries (SIBs). Now, an abnormal layered‐tunnel heterostructure Na_0.44Co_0.1Mn_0.9O₂ cathode material induced by chemical element substitution is reported. By virtue of beneficial synergistic effects, this layered‐tunnel electrode shows outstanding electrochemical performance in sodium half‐cell system and excellent compatibility with hard carbon anode in sodium full‐cell system. The underlying formation process, charge compensation mechanism, phase transition, and sodium‐ion storage electrochemistry are clearly articulated and confirmed through combined analyses of in situ high‐energy X‐ray diffraction and ex situ X‐ray absorption spectroscopy as well as operando X‐ray diffraction. This crystal structure engineering regulation strategy offers a future outlook into advanced cathode materials for SIBs.     

Tuning Internal Strain in Metal–Organic Frameworks via Vapor Phase Infiltration for CO2 Reduction

A gas‐phase approach to form Zn coordination sites on metal–organic frameworks (MOFs) by vapor‐phase infiltration (VPI) was developed. Compared to Zn sites synthesized by the solution‐phase method, VPI samples revealed approximately 2.8 % internal strain. Faradaic efficiency towards conversion of CO₂ to CO was enhanced by up to a factor of four, and the initial potential was positively shifted by 200–300 mV. Using element‐specific X‐ray absorption spectroscopy, the local coordination environment of the Zn center was determined to have square‐pyramidal geometry with four Zn?N bonds in the equatorial plane and one Zn‐OH₂ bond in the axial plane. The fine‐tuned internal strain was further supported by monitoring changes in XRD and UV/Visible absorption spectra across a range of infiltration cycles. The ability to use internal strain to increase catalytic activity of MOFs suggests that applying this strategy will enhance intrinsic catalytic capabilities of a variety of porous materials.