气相生长氮化铝单晶的新方法

通过在钨坩埚盖开小孔的方法改变氮化铝结晶衬底上的温度场分布,在开孔处形成局部低温区;由于孔的几何尺寸的限制和氮化铝晶体生长的各向异性,开孔处的氮化铝晶体单晶化;随后,开孔处的单晶起籽晶的作用,逐渐长成较大尺寸、较高质量的氮化铝单晶.目前用该方法已经制备出直径大于2mm的氮化铝单晶体.     

太赫兹CSAR运动目标距离速度估计与重定位方法

圆周合成孔径雷达(CSAR)中,由于雷达平台绕观测场景圆周飞行,雷达和地面目标之间的距离方程复杂,目标的距离向参数和方位参数之间有复杂的耦合关系,导致单独估计动目标距离向速度参数的难度加大。提出一种基于子孔径分解的太赫兹CSAR运动目标距离向速度估计方法,选择合适的子孔径角度,对CSAR进行子孔径分解,在子孔径条件下,通过小角度近似,可以实现运动目标距离向速度和其他参数间的解耦合,准确估计运动目标的距离向速度,实现运动目标的精确重定位。仿真和实测数据验证了该算法的有效性。     

Rapid Identification for the Pterocarpus Bracelet by Three-Step Infrared Spectrum Method

In order to explore a rapid identification method for the anti-counterfeit of commercial high value collections, a three-step infrared spectrum method was used for the pterocarpus collection identification to confirm whether a commercial pterocarpus bracelet (PB) was made from the precious species of Pterocarpus santalinus (P. santalinus). In the first step, undertaken by Fourier transform infrared spectroscopy (FTIR) spectrum, the absorption peaks intensity of PB was slightly higher than that of P. santalinus only at 1594 cm⁻¹, 1205 cm⁻¹, 1155 cm⁻¹ and 836 cm⁻¹. In the next step of second derivative IR spectra (SDIR), the FTIR features of the tested samples were further amplified, and the peaks at 1600 cm⁻¹, 1171 cm⁻¹ and 1152 cm⁻¹ become clearly defined in PB. Finally, by means of two-dimensional correlation infrared (2DIR) spectrum, it revealed that the response of holocellulose to thermal perturbation was stronger in P. santalinus than that in PB mainly at 977 cm⁻¹, 1008 cm⁻¹, 1100 cm⁻¹, 1057 cm⁻¹, 1190 cm⁻¹ and 1214 cm⁻¹, while the aromatic functional groups of PB were much more sensitive to the thermal perturbation than those of P. santalinus mainly at 1456 cm⁻¹, 1467 cm⁻¹, 1518 cm⁻¹, 1558 cm⁻¹, 1576 cm⁻¹ and 1605 cm⁻¹. In addition, fluorescence microscopy was used to verify the effectiveness of the above method for wood identification and the results showed good consistency. This study demonstrated that the three-step IR method could provide a rapid and effective way for the anti-counterfeit of pterocarpus collections.     

A Novel Method for Pattern Recognition of GIS Partial Discharge via Multi-Information Ensemble Learning

Partial discharge (PD) is the main feature that effectively reflects the internal insulation defects of gas-insulated switchgear (GIS). It is of great significance to diagnose the types of insulation faults by recognizing PD to ensure the normal operation of GIS. However, the traditional diagnosis method based on single feature information analysis has a low recognition accuracy of PD, and there are great differences in the diagnosis effect of various insulation defects. To make the most of the rich insulation state information contained in PD, we propose a novel multi-information ensemble learning for PD pattern recognition. First, the ultra-high frequency and ultrasonic data of PD under four typical defects of GIS are obtained through experiment. Then the deep residual convolution neural network is used to automatically extract discriminative features. Finally, multi-information ensemble learning is used to classify PD types at the decision level, which can complement the shortcomings of the independent recognition of the two types of feature information and has higher accuracy and reliability. Experiments show that the accuracy of the proposed method can reach 97.500%, which greatly improves the diagnosis accuracy of various insulation defects.     

HIGH-FREQUENCY VIBRATIONS OF CORRUGATED CYLINDRICAL PIEZOELECTRIC SHELLS

Coupled extensional and flexural cylindrical vibrations of a corrugated cylindrical piezoelectric shell consisting of multiple pieces of circular cylindrical surfaces smoothly connected along their generatrix are studied. To validate the results for the case of relatively thick shells or equivalently high-frequency modes with short wavelengths, existing analysis is extended by considering shear deformation and rotatory inertia. An analytical solution is obtained. Based on the solution, resonant frequencies and mode shapes are calculated.     

Numerical Study on Entropy Generation of the Multi-Stage Centrifugal Pump

The energy loss of the multi-stage centrifugal pump was investigated by numerical analysis using the entropy generation method with the RNG k-ε turbulence model. Entropy generation due to time-averaged motion and velocity fluctuation was mainly considered. It was found that the entropy generation of guide vanes and impellers account for 71.2% and 23.3% of the total entropy generation under the designed flow condition. The guide vanes are the main hydraulic loss domains and their entropy generation is about 9 W/K, followed by impellers. There are vortices at the tongue of the guide vane inlet as well as flow separations in the impellers, which lead to entropy generation. The fluid impacts the outer surface of the guide vanes, resulting in the increase in entropy generation. There are refluxes near the guide vane tongues which also increase the entropy generation of this part. The entropy generation distribution of the guide vanes and impellers was investigated, which found that the positive guide vane has more entropy generation compared with the reverse guide. The entropy generation of the blade suction surface is higher compared with the pressure surface. This study indicated that the entropy generation method has distinct advantages in the assessment of hydraulic loss.     

ZnO薄膜的研究进展

光泵浦紫外激光的获得使ＺｎＯ成为热门的新型光电材料,文章从ＺｎＯ的基本特性、光电特性、生长方法,用途和应用前景等方面综述了ＺｎＯ的最新研究及进展,并对ＺｎＯ今后的发展作了展望。     

多用户波束优化设计在智能天线系统中的应用

本文讨论了智能天线系统中的下行波束形成问题。智能天线可以通过阵列天线技术在同一信道中利用多个波束同时给多个用户发送不同的信号，以提高通信容量和质量。本文提出了蜂窝小区移动通信体制下波束形成的约束模型，并基于该模型利用Ｃｈｅｂｙｓｈｅｖ线阵实现多波束优化设计。理论分析及仿真结果表明，与目前其它方法相比，该方法具有空间分辨力高、计算量小、稳健性好等优点，有较强的实用性。     

基于USB的155 Mb/s码型发生器的研制

介绍了一种带USB接口的光的155Mb/s码型发生器。伪随机码和其他格式的码型由PC产生通过USB接口进入双口RAM,再经串并变换后由光发射模块发射。该系统可方便地设定各种格式的码型,并同时具备光接口和电接口,可广泛应用于光通信各种实验中,具有重要的实用价值。     

ROTATED BARNES-WALL LATTICE BASED VECTOR QUANTIZER AND ITS APPLICATION IN IMAGE-SEQUENCE CODING

A new scheme is presented to design a rotated Barnes-Wall lattice based vector quantizer(LVQ). The construction method of the LVQ and its fast quantizing algorithm are described at first. Then gain-shape lattice vector quantizer(GSLVQ) with LVQ as shape quantizer is discussed. Finally the GSLVQ is used in image-sequence coding and good experimental results are obtained.