Low-Loss Fiber De-Multiplexers

Reported are fiber de-multiplexers based on side-polished fibers with a long interaction length and intra-core fiberBragg gratings. In conjunction with the silicon processing technologies, we demonstrate fiber filters and advantages ofour approaches are addressed.     

CTAB对四-(4-N-甲基吡啶)卟啉SERS谱的影响

研究了阳离子表面活性剂十六烷基三甲基溴化铵 (CTAB)对四 ( 4 N 甲基吡啶 )卟啉 (H2 TMPyP)及其银配合物 (AgTMPyP)在Ag胶中的表面增强拉曼散射 (SERS)谱的影响 .SERS光谱表明 ,吸附于Ag胶粒的H2 TMPyP与衬底银原子结合形成AgTMPyP ,加入CTAB后 ,部分AgTMPyP表面络合物还原为H2 TMPyP .相似的去金属化反应也出现在AgTMPyP/Ag胶 /CTAB体系中 .CTAB的加入使SERS谱带强度明显增加 .AgTMPyP的去金属化被认为是由于CTAB的存在使Ag胶颗粒表面附近微环境发生改变     

A comparison of a theoretical model for quasi-statically and dynamically induced environmental vibration from trains with measurements

This paper presents comparisons between a theoretical ground vibration model and measured data at three sites. The model, which is briefly outlined here, encompasses both the quasi-static and dynamic mechanisms of excitation. The vertical dynamics of a number of vehicles travelling at a constant speed on an infinite track are coupled to a semi-analytical model for a three-dimensional layered ground. This model is also used to demonstrate the roles of the two components of vibration at different frequencies and for train speeds below and above the lowest ground wave speed. It is found that, in most practical cases, the dynamic component gives rise to the higher level of vibration.     

The structure of multi-electrode-pair pulse laser and discharge pulse time selection

Applying multi-electrode-pair pulse TEA CO₂ laser to one optical resonance cavity will have several advantages over traditional method, including higher gain, shorter pulse discharge time interval, and in particular, continuous adjustable time interval of multi-pulse laser output can be achieved without high vacuum condition. To improve laser's working stabilization, we proposed new approaches to optimize laser structure design and discharge pulse time interval selection.     

Hg1-xCdxTe/Cd1-zZnzTe的X射线反射率及半峰全宽的动力学研究

X射线衍射摇摆曲线的计算机模拟是一种获得材料晶体质量参量的有效方法，其中材料本征摇摆曲线的计算是计算机模拟的基础。用X射线动力学理论计算了Hg1-xCdxTe和Cd1-zZnzTe本征反射率曲线，并研究了组分、膜厚分别对本征反射率和半峰全宽的影响。结果表明Hg1-xCdxTe和Cd1-zZnzTe的本征反射率和半峰全宽与材料组分和厚度有明显的依赖关系，且该依赖关系取决于X射线在材料中的散射和吸收的相对强弱。薄膜的厚度也是直接影响本征摇摆曲线峰形、半峰全宽和反射率的重要因素，当薄膜厚度小于穿透深度时，表征本征反射率曲线的各个参量均与薄膜厚度有直接的关系。对于(333)衍射面，碲镉汞材料厚度大于7μm后，本征反射率和半峰全宽将不再发生明显变化。     

A high-resolution burst-mode laser transmitter with fast and accurate level monitoring for 1.25 Gb/s upstream GPONs

An innovative burst-mode laser transmitter (BM-TX) is presented for gigabit-capable passive optical network (GPON) upstream transmission at 1.25 Gb/s. The laser bias and modulation current each can reach 80 mA with a resolution of 0.1 mA providing a total drive current up to 160 mA. Both currents are generated by 10-bit current steering digital-to-analog converters (DACs), the architecture of which is specially adapted to yield a monotonic current setting at settling times below 12.8 ns. Tests show that fast automatic power control (APC) can stabilize and track the launched optical power with a tolerance of less than 1 dB over a wide temperature range for outdoor operation. The APC only requires a straightforward calibration of the "0" and the "1" level at room temperature. Optical level monitoring on strings of four consecutive "0" bytes and two consecutive "1" bytes at 1.25 Gb/s is demonstrated. APC based on such short strings of data has not been shown before. The circuits have been designed in a 0.35 /spl mu/m SiGe BiCMOS process. Experimental results show that this dc-coupled BM-TX meets the specifications of the recently approved ITU-T Recommendation G.984.2 supporting an intelligent power leveling mechanism (PLM).     

InAs/GaAs quantum dot infrared photodetectors with different growth temperatures

InAs/GaAs quantum dot infrared photodetectors were fabricated with quantum dots grown at three different temperatures. Large detection wavelength shift (5–14.5 μm) was demonstrated by changing 40 degrees of the epitaxy temperature. The smaller quantum dots grown at lower temperature generate 14.5 μm responses. The detectivity of the normal incident 15 μm QDIP at 77 K is 3 × 10⁸ cm Hz^1/2/W. A three-color detector was also demonstrated with quantum dots grown at medium temperature. The three-color detection comes from two groups of different sizes of dots within one QD layer. This new type of multicolor detector shows unique temperature tuning behavior that was never reported before.     

非对称核物质中同位旋对称势的动量和密度依赖性

在Brueckner-Hartree-Fock理论框架内, 研究了同位旋非对称核物质中质子和中子单粒子势的动量相关性及其随同位旋非对称度的变化, 在此基础上计算了同位旋对称势, 并讨论了三体核力的影响. 结果表明同位旋对称势对于同位旋非对称度的依赖性很弱, 但对于动量和密度均有较强的依赖性. 当密度固定时, 同位旋对称势随动量增加而减小. 尽管三体核力对于质子和中子单粒子势的动量相关性有较大影响, 但对同位旋对称势的影响很小. 还与目前重离子碰撞输运理论模型中所使用的各种参数化的唯象对称势进行了比较.     

Active control and a simple estimation method for the onset of Rayleigh-Bénard convection in temperature-dependent-viscosity liquids

Active feedback control for the onset of Rayleigh-Bénard Convection in temperature-dependent-viscosity liquids is investigated. In this paper, three major problems are addressed: (1) The results of Tang-Bau control are improved by considering the effects of temperature-dependent viscosity; (2) A more efficient two-plate control strategy is presented. A phenomenon of coalescence of the unstable modes is observed as the controller gain is large enough; (3) A simple way to estimate the critical Rayleigh number under the effects of temperature-dependent viscosity is described. Numerical results show that the effects of temperature-dependent viscosity on the critical Rayleigh number should be taken into account in some cases and the onset of Rayleigh-Bénard convection can be effectively delayed or advanced by the active feedback control strategies studied here.