Charged particle evaporation from compound nuclei formed by bombardment of58Ni with 70 MeV16O ions II

The experimental data have been compared with the result of extensive compound nucleus calculations based on the statistical theory. The shapes and the absolute cross sections for the high energy parts of the proton- and -spectra are reproduced with a level density parametera 0·11 A MeV^–1 and a moment of inertiaJ1·3J _rig. The same parameters fairly well reproduce the angular distributions corresponding to the high energy parts of the spectra whereas deviations between theory and experiment are observed for the lower energies where particles emitted by higher order processes contribute. The observed total cross section for emission of an -particle is 500 mb or 1·7 times calculated value. For protons the corresponding numbers are 2313 mb and 3·0. The increase in cross section is ascribed to the process in which several particles are evaporated. Various methods are discussed for determination of the average orbital angular momentum of the emitted particle or the average spin of the daughter nucleus.On leave fromFaculty of Matematics and Physics, Charles University, Prague, Czechoslovakia.     

Comparison of Si-O-C interfacial bonding of alcohols and aldehydes on Si(111) formed from dilute solution with ultraviolet irradiation

Aliphatic alcohols and aldehydes were reacted with the Si(111)-H surface to form Si-O-C interfacial bonds from dilute solution by using ultraviolet light. The resulting monolayers were characterized by using transmission infrared spectroscopy, spectroscopic ellipsometry, and contact angle measurements. The effect of different solvents on monolayer quality is presented. The best monolayers were formed from CH(2)Cl(2). The optimized monolayers were thoroughly characterized to determine the film structure and monolayer stability. The UV-promoted, alcohol-functionalized, and aldehyde-functionalized monolayers are of comparable quality to those previously prepared by other means. Although both molecules are tethered through a Si-O-C bond, the film reactivity is distinctly different with the aldehyde films being more chemically resistant. The differences in chemical reactivity, vibrational spectra, hydrophobicity, and ellipsometric thickness between the alcohol and aldehyde monolayers are attributed to a difference in molecular coverage and monolayer formation.     

Synthesis of phenaleno[1,9-bc]thiophene

The cyclization of 2-acetonylthionaphthalene, prepared from 2-mercaptonaphthalene (1) and chloro-acetone in the presence of sodium hydroxide, with polyphosphoric acid gave 1-methylnaphtho[2,1-b]thiophene (4) in 64% overall yield from 1. By bromination with N-bromosuccinimide, 4 was converted in 40% yield into l-bromomethylnaphtho[2,1-b]thiophene (8) . Treatment of 8 with potassium cyanide in a phase-transfer medium gave l-cyanomethylnaphtho[2,1-b]thiophene (10) in good yield. Compound 10 was reduced to the corresponding aldehyde 11 and then cyclized with polyphosphoric acid to phenaleno[l,9-bc]thiophene (12) in 24% overall yield from 10.     

Novel ene trimerization of 1-phenylcyclopropene

1-Phenylcyclopropene (1) was synthesized by treatment of 1,1,2-tribromo-2-phenylcyclopropane (2) with 2.5 equiv of methyllithium followed by protonation. Compound 1 underwent ene dimerization to form ene dimer 5 followed by ene reaction with monomer 1 (enophile) to give an ene trimer 6. Both of these two ene reactions derived endo transition states. In the meantime, the [2+2] adduct, trans-1,2-diphenylbicyclo[3.1.0.0(2,4)]hexane (7), was also formed. When the adduct 7 was heated at THF refluxing temperature, 1,2-diphenylcyclohexa-1,4-diene (8) was obtained. Compound 8 was treated with DDQ to yield o-diphenylbenzene.     

Determination of copper(II) in various samples by flame atomic absorption spectrophotometry after column preconcentration onto pulverized Amberlite XAD-4 loaded with N-benzoylphenylhydroxylamine

A sensitive technique for the determination of trace Cu(II) in various samples after column preconcentration by adsorbing onto pulverized Amberlite XAD-4 loaded with N-benzoylphenylhydroxylamine (BPHA) was developed. Several experimental conditions, such as the size of XAD-4, adsorption flow rate, pH of sample solution, and so forth, were optimized. The interfering effects of diverse concomitant ions were investigated. Al(III), Fe(III), Ni(II), and Co(II) interfered, but the interference by these ions was completely eliminated by adjusting the amount of XAD-4-BPHA resin to 0.30 g. The dynamic range, the correlation coefficient (R₂), and the detection limit obtained by the proposed technique were 1.0–60, 0.9953, and 0.83 ng/mL, respectively. For validating the technique, the aqueous samples (stream water, reservoir water, and wastewater), the diluted brass sample, and the plastic sample were used as real samples. Recovery yields of 94–102% were obtained. These measured data were not different from ICP-MS data at the 95% confidence level. This method was also validated by rice flour CRM (normal, fortified) samples. Based on the results of the experiment, it has been found that the proposed technique can be applied to the determination of Cu(II) in various real samples. The text was submitted by the authors in English.     

Adsorption configuration and local ordering of silicotungstate anions on Ag(100) electrode surfaces

X-ray reflectivity, cyclic voltammetry, and scanning tunneling microscopy (STM) are used to examine the structure of alpha-SiW12O4(4-) or silicotungstic acid (STA) adsorbed on Ag(100) in acid solution. The voltammetry shows that STA passivates the Ag surface relative to electron transfer to a solution redox species. STM images reveal the formation of a series of lattice structures, one of which can be associated with a commensurate ( radical13x radical13)R33.69 degrees structural model. X-ray reflectivity measurements show uniquely that STA orients with its four-fold axis perpendicular to the Ag(100) surface and that the center of the STA molecule is 4.90 A above the top layer of the Ag substrate. Analysis of bond lengths leads to a footprint of STA on Ag(100), in which the four terminal O atoms are located near the hollow sites and have a Ag-O bond length of 2.06 A. This bond length is consistent with a strong covalent interaction between STA and the Ag surface.     

Tuning chirality of single-wall carbon nanotubes by selective etching with carbon dioxide

CO2 molecule chemisorbs selectively on the zigzag tube edge without an activation barrier, whereas it physisorbs on the armchair edge of nanotubes. In addition, carbon nanotubes can be etched by an adsorbed oxygen atom of CO2 molecule. From our results, we suggest a selective etching mechanism for tuning the chirality of the mass-produced carbon nanotubes.     

Reversible replication between ordered mesoporous silica and mesoporous carbon

Highly ordered mesoporous silica can be regenerated from a mesoporous carbon CMK-3 that is a negative replica of mesoporous silica SBA-15, indicating reversible replication between carbon and inorganic materials.     

Study on the properties of dextran-linked adenine nucleotide derivatives

A simple method is described for the preparation of dextran-linked coenzyme derivatives. Several different 8-(6-aminohexyl)amino-adenine nucleotide coenzymes and their derivatives were covalently attached to dextran by incubation with bromohydroxypropyl derivatives of dextran at room temperature in an alkaline medium. The polymer-linked adenine nucleotide derivatives were separated from the free coenzyme derivatives by a Sephadex G-50 column. The prepared dextran derivatives have ligand densities ranging from 20 to 100 μmol/g of dextran derivatives depending on the conditions of coupling and derivatives. NMR studies revealed that proton resonances of the polymer-linked coenzymes exhibit short transverse relaxation times (T₂) but long longitudinal relaxation times (T₁) This phenomenon was interpreted in terms of the anisotropic motions of the dextran-bound coenzyme derivatives in which the fast axial motions and slow restricted transverse motions of the bound coenzyme derivatives are postulated. These observations could properly explain why the polymer-linked coenzymes exhibit lower biological activity, but similar binding affinity to most enzymes.     

Modeling dioxygen-activating centers in non-heme diiron enzymes: carboxylate shifts in diiron(II) complexes supported by sterically hindered carboxylate ligands

General synthetic routes are described for a series of diiron(II) complexes supported by sterically demanding carboxylate ligands 2,6-di(p-tolyl)benzoate (Ar(Tol)CO(2)(-)) and 2,6-di(4-fluorophenyl)benzoate (Ar(4-FPh)CO(2)(-)). The interlocking nature of the m-terphenyl units in self-assembled [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)L(2)] (L = C(5)H(5)N (4); 1-MeIm (5)) promotes the formation of coordination geometries analogous to those of the non-heme diiron cores in the enzymes RNR-R2 and Delta 9D. Magnetic susceptibility and M?ssbauer studies of 4 and 5 revealed properties consistent with weak antiferromagnetic coupling between the high-spin iron(II) centers. Structural studies of several derivatives obtained by ligand substitution reactions demonstrated that the [Fe(2)(O(2)CAr')(4)L(2)] (Ar' = Ar(Tol); Ar(4-FPh)) module is geometrically flexible. Details of ligand migration within the tetracarboxylate diiron core, facilitated by carboxylate shifts, were probed by solution variable-temperature (19)F NMR spectroscopic studies of [Fe(2)(mu-O(2)CAr(4-FPh))(2)-(O(2)CAr(4-FPh))(2)(THF)(2)] (8) and [Fe(2)(mu-O(2)CAr(4-FPh))(4)(4-(t)BuC(5)H(4)N)(2)] (12). Dynamic motion in the primary coordination sphere controls the positioning of open sites and regulates the access of exogenous ligands, processes that also occur in non-heme diiron enzymes during catalysis.