Chloroperoxidase Modified Electrode for Amperometric Determination of 2,4,6‐Trichlorophenol

A carbon paste‐poly(o‐phenylendiamine)‐modified electrode to be used as amperometric biosensor for 2,4,6‐trichlorophenol (TCP) is described. The enzyme chloroperoxidase (EC 1.11.1.10) from Caldariomyces fumago is immobilized through dispersion in a graphite paraffin oil carbon paste covered by an electrogenerated poly(o‐phenylendiamine) (PPD) layer. The main enzymatic dehalogenation product, 2,6‐dichloro‐1,4‐benzoquinone (DCQ) is characterized by liquid chromatography‐mass spectrometry and cyclic voltammetry. This product is electrochemically active and can be detected amperometrically at +150 mV vs. Ag|AgCl|KCl (3 M). The biosensor exhibits a response time of 4 min, a detection limit of 10^?7 M, and a dynamic linear range between 10^?7 and 10^?6 M. Selectivity as well as operating and storage stability were evaluated.     

生物电极的最新发展

生物电极是生物传感器最重要的一个分支，本文对近年来国内外有关生物电极的最新研究成果作一综述，并按生物膜材料、固定方法、换能器、应用及理论研究五部分加以分类。     

Direct determination of chlorophenols in water samples through ultrasound-assisted hollow fiber liquid–liquid–liquid microextraction on-line coupled with high-performance liquid chromatography

In this study we on-line coupled hollow fiber liquid–liquid–liquid microextraction (HF-LLLME), assisted by an ultrasonic probe, with high-performance liquid chromatography (HPLC). In this approach, the target analytes – 2-chlorophenol (2-CP), 3-chlorophenol (3-CP), 2,6-dichlorophenol (2,6-DCP), and 3,4-dichlorophenol (3,4-DCP) – were extracted into a hollow fiber (HF) supported liquid membrane (SLM) and then back-extracted into the acceptor solution in the lumen of the HF. Next, the acceptor solution was withdrawn on-line into the HPLC sample loop connected to the HF and then injected directly into the HPLC system for analysis. We found that the chlorophenols (CPs) could diffuse quickly through two sequential extraction interfaces – the donor phase – SLM and the SLM – acceptor phase – under the assistance of an ultrasonic probe. Ultrasonication provided effective mixing of the extracted boundary layers with the bulk of the sample and it increased the driving forces for mass transfer, thereby enhancing the extraction kinetics and leading to rapid enrichment of the target analytes. We studied the effects of various parameters on the extraction efficiency, viz. the nature of the SLM and acceptor phase, the compositions of the donor and acceptor phases, the fiber length, the stirring rate, the ion strength, the sample temperature, the sonication conditions, and the perfusion flow rate. This on-line extraction method exhibited linearity (r² ≥ 0.998), sensitivity (limits of detection: 0.03–0.05 μg L⁻¹), and precision (RSD% ≤ 4.8), allowing the sensitive, simple, and rapid determination of CPs in aqueous solutions and water samples with a sampling time of just 2 min.     

Separation and characterization of sucrose esters from Oriental tobacco leaves using accelerated solvent extraction followed by SPE coupled to HPLC with ion‐trap MS detection

Sucrose esters (SEs) were successfully extracted from Oriental tobacco leaves using a new methodology based on accelerated solvent extraction followed by hydrophilic–lipophilic balanced cartridge cleanup step. The SEs were detected by HPLC with ion‐trap MS detection using an electrospray interface operated in the positive ion mode. This methodology combines the high efficiency of extraction provided by a pressurized fluid and the highly sensitive characterization offered by ion‐trap MS. Under the optimized conditions, 14 SEs were first identified among a total of 23 SEs found in Oriental tobacco leaves. Under the same conditions, only four new SEs were extracted by using traditional ultrasound‐assisted extraction and liquid–solid extraction methods. The present method might be potentially useful in high‐efficiency extraction and sensitive characterization of SEs from complex matrices such as tobacco leaves.     

Facile One-Pot,Multicomponent Synthesis of Pyridines Under Microwave Irradiation

A series of 2-amino-6-(2-oxo-2H-chromen-3-yl)-4-pyridine-3-carbo-nitriles were synthesized by the one-pot, multicomponent reaction of 3-acetyl-coumarin, aromatic aldehydes, malononitrile, and ammonium acetate in acetic acid under microwave irradiation. The reactions were completed in 10–13 min with 61–86% yields, were environmental benign, and had easy workup. Their structures were confirmed by ¹H NMR, IR, and MS spectra and elemental analysis.     

Simultaneous determination of seventeen glucocorticoids residues in milk and eggs by ultra-performance liquid chromatography/electrospray tandem mass spectrometry

A comprehensive analytical method has been developed and validated for the simultaneous determination of seventeen glucocorticoid residues in eggs and milk. The mass spectrometer parameters, the composition of the mobile phase and the sample preparation method were firstly optimized to obtain maximum sensitivity. The samples were deconjugated with beta-glucuronidase/arylsulfatase enzyme and concentrated using an Oasis HLB solid-phase extraction cartridge, followed by cleanup with a dual Sep-pak silica and aminopropyl cartridge. The analytes were quantified by ultra-performance liquid chromatography (using a C18 column)/electrospray ionization tandem mass spectrometry (UPLC/ESI-MS/MS) operating in the negative ion mode. The assay for the 17 glucocorticoids was linear over the range of 1-200 microg/L for milk and egg samples with a high correlation coefficient (>0.99). The limits of quantification (LOQs) for the target analytes were 0.04-1.27 microg/kg for the egg samples and 0.03-0.73 microg/kg for the milk samples. The average extraction recoveries of the glucocorticoids from eggs and milk at two concentration levels (spiked at 0.40 and 2.00 microg/kg) were 65.6-118.7% and 61.5-119.6%, respectively, with relative standard deviations between 1.8-17.0% and 2.4-18.4%, respectively. Because of its high sensitivity, good precision and specificity, the method was found to be suitable for trace analysis of synthetic and natural glucocorticoids in complex biosamples such as eggs and milk.     

General and efficient strategy for erythrinan and homoerythrinan alkaloids: syntheses of (+/-)-3-demethoxyerythratidinone and (+/-)-erysotramidine

[reaction: see text] A general and efficient strategy to both aromatic-type and nonaromatic-type erythrinan and homoerythrinan alkaloids has been developed. This approach involves a key two-step sequence, an alkylation of a ketone with various N-substituted iodoacetamides followed by a N-acyliminium ion promoted intramolecular cyclization, and represents one of the shortest routes to erythrinan and homoerythrinan alkaloids. As the application, the formal total synthesis of (+/-)-3-demethoxyerythratidinone and the total synthesis of (+/-)-erysotramidine have been achieved, respectively.     

Rational design of a reversible pH-responsive switch for peptide self-assembly

Peptide TZ1H, based on the heptad sequence of a coiled-coil trimer, undergoes fully reversible, pH-dependent self-assembly into long-aspect-ratio helical fibers. Substitution of isoleucine residues with histidine at the core d-positions of alternate heptads introduces a mechanism by which self-assembly is coupled to the protonation state of the imidazole side chain. Circular dichroism spectroscopy, transmission electron microscopy, and microrheology techniques revealed that the self-assembly of TZ1H coincides with a distinct coil-helix conformational transition that occurs within a narrow pH range near the pKa of the imidazole side chains of the core histidine residues.