微波辐射下LaNaY沸石的水热交换反应

报道微波辐射应用于ＮａＹ沸石与Ｌａ（ＮＯ＿３）＿３溶液的离子交换反应，结果表明微波辐射可提高Ｌａ￣＋的交换度，缩短交换时间。     

烯烃羰化—步制醇铑系催化新体系的研究

羰基铑催化剂由于其加氢性能较弱，在羰基化反应的研究中，通常仅作为烯烃氢甲酰化制醛的催化剂。产物中得不到醇。本文则报道了以Ｒｈ＿２（ＡｃＯ）＿４和Ｒｈ＿６（ＣＯ）＿１６为催化剂，在一个反应器内进行烯烃氢甲酰化，加氢制醇的研究。系统考察了Ｒｈ／Ｐｂｕ＿３／ＥｔＯＨ催化体系受各种反应条件的影响。在最佳反应条件下，烯烃转化率达１００％。对醇选择性亦在９９．５％以上，正异构比在２以上．为烯烃一步制醇建立了铑系催化新体系。文中并利用红外光谱测定了反应过程的催化剂物种．实验证明，由烯烃一步制醇是由烯烃首先进行氢甲酰化反应，然后由生成的醛进一步加氢成醇的一个串联反应过程。前一步骤反应速度较快，２ｈ内可使９５％以上的烯烃转化为醛，后面由醛加氢成醇则进行缓慢，在１００—１２０℃下，至少２２ｈ，才能使醛全部转化为醇。     

Microwave irradiation assisted synthesis, alkylation reaction, and configuration analysis of aryl pyrogallol[4]arenes

A series of aryl pyrogallol[4]arenes were efficiently synthesized in excellent yields by cyclocondensation of pyrogallol with aromatic aldehydes under microwave irradiation. The structures of aryl pyrogallol[4]arenes were confirmed by characterization of their acylated derivatives. Under microwave irradiation, alkylation reactions of aryl pyrogallol[4]arenes with some alkylating reagents such as n-butyl iodide, benzyl chloride, and ethyl α-chloroacetate were also finished quickly to yield fully O-alkylated products. The ¹H NMR spectra and crystal structures showed that the acylated and alkylated aryl pyrogallol[4]arenes existed mainly in rctt (cis-trans-trans) configuration.     

Structures and energies of coadsorbed CO and H2 on Fe5C2(001), Fe5C2(110), and Fe5C2(100)

Density functional theory calculations have been carried out on the CO/H2 coadsorption on the (001), (110), and (100) surfaces of Fe5C2 for the understanding of the Fischer-Tropsch synthesis (FTS) mechanism. The stable surface species changes with the variation of the H2 and CO coverage. Along with dissociated hydrogen and adsorbed CO in 2-, 3-, and 4-fold configurations, methylidyne (C(s)H) (C(s), surface carbon), ketenylidene (C(s)CO), ketenyl (C(s)HCO), ketene (C(s)H2CO), and carbon suboxide (C(s)C2O2) are computed as thermodynamically stable surface species on Fe5C2(001) and Fe5C2(110) containing both surface iron and carbon atoms. These surface carbon species can be considered as the preliminary stages for FTS. On Fe5C2(100) with only iron atoms on the surface layer, the stable surface species is dissociated hydrogen and CO with top and 2-fold configurations. The bonding nature of these adsorbed carbon species has been analyzed.     

The effect of the third component on butadiene–propylene alternating copolymerization catalyzed by vanadium–aluminum system

The effects of five ethers and four AliBu₂OR's with varied R' on butadiene–propylene alternating copolymerization were investigated. It was found that by adding the proper third component, both the conversion and the catalytic efficiency could be increased. The effect of the third component on the valence state of vanadium ion was also studied. A model of the active center of the ternary-component catalyst system was proposed.     

Hybridized local and charge-transfer excited state fluorophores enabling organic light-emitting diodes with record high efficiencies close to 20%

Pure organic emitters with full utilization of triplet excitons are in high demand for organic light-emitting diodes (OLEDs). Herein, through modulation of electron donors and introduction of phenyl rings as π spacers, we present three pure organic fluorophores (BCz, BTCz and BPTCz) with the hybridized local and charge-transfer (HLCT) excited state feature for OLED fabrication. Importantly, the introduction of π spacers in BPTCz not only enhances locally excited character with a fast radiative decay but also promotes intermolecular interactions to suppress non-radiative decays, contributing to a high solid-state fluorescence efficiency over 90%. Significantly, BPTCz not only endows its doped OLEDs with an external quantum efficiency (EQE) up to 19.5%, but also its non-doped OLED with a high EQE of 17.8%, and these outstanding efficiencies are the state-of-the-art performances of HLCT-based OLEDs.

Three purely organic fluorophores with a hybridized local and charge-transfer excited state feature are presented and enabled organic light-emitting diodes with record high external quantum efficiencies close to 20%.     

Preparation and thermal properties of a novel flame-retardant coating

A novel silicone and phosphate modified acrylate (DGTH) was synthesized and characterized by ¹H NMR and FTIR. It was found that DGTH could be cured both by UV radiation and moisture mode with FTIR. The flammability and thermal behavior of the cured film were studied by the limited oxygen index (LOI), thermogravimetric analysis (TG) and real time Fourier transform infrared (RT-FTIR). The LOI value of the cured film is 48 and the TG data shows that the cured film has three characteristic degradation temperature regions, attributing to the decomposition of phosphate and polyurethane to alcohols and isocyanates, thermal pyrolysis of alkyl chains, and decomposition of unstable structures in char, respectively. The RT-FTIR data implies that the degraded products of phosphate form poly(phosphoric acid) further catalyse the breakage of carbonyl groups to form an intumescent char, preventing the samples from further burning.     

Reaction mechanism studies on isoquinoline with hydroxyl radical in aqueous solutions

The reaction mechanism between isoquinoline and ·OH radical in aqueous dilute solutions under different conditions was studied by pulse radiolysis. The main characteristic peaks in these transient absorption spectra were attributed and the growth-decay trends of several transient species were investigated. Under neutral or alkaline conditions, the reaction of ·OH radical and isoquinoline produces OH-adducts with respective rate constants of 3.4 × 10⁹ and 6.6 × 10⁹ mol⁻¹ · dm³ · s⁻¹ while under acidic conditions, the isoquinoline was firstly protonated and then ·OH added to the benzene ring and produced protonated isoquinoline OH-adducts with a rate constant of 3.9 × 10⁹ mol⁻¹ · dm³ · s⁻¹. With a better understanding on radiolysis of isoquinoline, this study is of help for its degradation and for environmental protection. __________ Translated from Journal of Fudan University (Natural Science), 2006, 45(6): 774–778 [8BD1;81EA: 590D;65E6;5B66;62A5;(自然科学版)]     

Z‐bpy,a New C2‐Symmetric Bipyridine Ligand and Its Application in Enantioselective Copper(I)‐Catalyzed Cyclopropanation of Olefins

A rigid C₂‐symmetric chiral bipyridine ligand Z‐bpy with a triptycene‐like backbone was designed and synthesized from simple chemicals in a scalable route. Using this new ligand, copper(I) catalyzed cyclopropanation of styrenes with commercial ethyl diazoacetate produced various corresponding cyclopropanes in high yields, diastereoselectivity and enantioselectivity up to 97% ee.     

Characterization of framework and extra-framework aluminum species in non-hydrated zeolites Y by 27Al spin-echo, high-speed MAS, and MQMAS NMR spectroscopy at B0 = 9.4 to 17.6 T

27Al spin-echo, high-speed MAS (nu(rot) = 30 kHz), and MQMAS NMR spectroscopy in magnetic fields of B0 = 9.4, 14.1, and 17.6 T were applied for the study of aluminum species at framework and extra-framework positions in non-hydrated zeolites Y. Non-hydrated gamma-Al2O3 and non-hydrated aluminum-exchanged zeolite Y (Al,Na-Y) and zeolite H,Na-Y were utilized as reference materials. The solid-state 27Al NMR spectra of steamed zeolite deH,Na-Y/81.5 were found to consist of four signals. The broad low-field signal is caused by a superposition of the signals of framework aluminum atoms in the vicinity of bridging hydroxyl protons and framework aluminum atoms compensated in their negative charge by aluminum cations (delta(iso) = 70 +/- 10 ppm, C(QCC) = 15.0 +/- 1.0 MHz). The second signal is due to a superposition of the signals of framework aluminum atoms compensated by sodium cations and tetrahedrally coordinated aluminum atoms in neutral extra-framework aluminum oxide clusters (delta(iso) = 65 +/- 5 ppm, C(QCC) = 8.0 +/- 0.5 MHz). The residual two signals were attributed to aluminum cations (delta(iso) = 35 +/- 5 ppm, C(QCC) = 7.5 +/- 0.5 MHz) and octahedrally coordinated aluminum atoms in neutral extra-framework aluminum oxide clusters (delta(iso) = 10 +/- 5 ppm, C(QCC) = 5.0 +/- 0.5 MHz). By chemical analysis and evaluating the relative solid-state 27Al NMR intensities of the different signals of aluminum species occurring in zeolite deH,Na-Y/81.5 in the non-hydrated state, the aluminum distribution in this material was determined.