3，5-二硝基苯甲酸镉配合物的合成、晶体结构、热稳定性和荧光性质

以3,5-二硝基苯甲酸,咪唑为配体,合成了新化合物[Cd(H₂O)₂(DNBA)(Im)₂](DNBA)·H₂O,(DNBA=3,5-二硝基苯甲酸阴离子)。该配合物属正交晶系,空间群为Ccc2,晶胞参数：a=1.324 99(4) nm,b=1.516 01(5) nm,c=2.789 22(8) nm;V=5.602 7(3) nm³,D_c=1.719 g·cm^-3,Z=8,μ=0.866 mm^-1,F(000)=2 912,最终偏离因子R₁=0.058 3,wR₂=0.146 4。该配合物中包含两个单核镉(Ⅱ)配合物,且配合物中还包含未配位的3,5-二硝基苯甲酸,金属中心均是六配位变形八面体结构。并测定和研究了标题化合物的热重和荧光性能。     

二维铁电材料ABP2X6内在极高的负泊松比

Recently, ferroelectric materials have attracted considerable research attention. In particular, two dimensional (2D) ferroelectric materials have been considered as most crucial for next-generation circuit designs because of their application as novel electric memory devices. However, a 2D ferroelectric material is very rare. The ferroelectric materials with the form ABP₂X₆ (A = Ag, Cu; B = Bi, In; X = S, Se) are of interest because of their ferroelectric property maintained in their ultrathin structures. Within the ABP₂X₆ monolayer, the P―P bonds form the pillars that hold the top and bottom X planes, while the off-center A―B atoms between the X layers induce a spontaneous ferroelectric polarization. If the two off-center A―B sites are equally aligned, this would lead to the appearance of the paraelectric state. Such intriguing structures must impart novel mechanical properties to the materials. Until now, there has been no report on the mechanical properties of monolayer ABP₂X₆. Based on first-principles calculations, we studied the structural, electronic, mechanical as well as the electromechanical coupling properties of monolayer ABP₂X₆ (A = Ag, Cu; B = Bi, In; X = S, Se). We found that they are all semiconductors with wide bandgaps of 2.73, 2.17, 3.00, and 2.31 eV for CuInP₂Se₆, CuBiP₂Se₆, AgBiP₂S₆, and AgBiP₂Se₆, respectively, which are calculated based on the Heyd-Scuseria-Ernzerhof (HSE) exchange correlation functional model. The conduction band minimum is mainly from p orbitals of X and B atoms, whereas the valence band maximum is due to the hybridization of the p orbital of X atoms and the d orbital of A atoms. Moreover, there are three short and three long A/B―X bonds due to the A―B off-center displacement. Together with the d-p orbital hybridization, the main reason for the distorted ferroelectric structure in ABP₂X₆ monolayers is the Jahn-Teller effect. ABP₂X₆ monolayers are predicted to be a new class of auxetic materials with an out-of-plane negative Poisson's ratio, i.e., the values of the negative Poisson's ratio are in the order AgBiP₂S₆ (−0.805) < AgBiP₂Se₆ (−0.778) < CuBiP₂Se₆ (−0.670) < CuInP₂S₆ (−0.060). This is mainly due to the tensile strain applied in the x/y direction enlarging the angle between P―P bonds and top layer X atoms, thereby enhancing the bucking height of monolayer ABP₂X₆. Moreover, external strain has a significant impact on the A―B off-center displacement, rendering an out-of-plane piezoelectric polarization. The values of e₁₃ for CuInP₂S₆, CuBiP₂Se₆, AgBiP₂S₆, AgBiP₂Se₆ monolayers are calculated to be −3.95 × 10⁻¹², −5.68 × 10⁻¹², −3.94 × 10⁻¹², −2.71 × 10⁻¹² C∙m⁻¹, respectively, which are comparable to the only experimentally confirmed 2D out-of-plane piezoelectric Janus system (piezoelectric coefficient = −3.8 × 10⁻¹² C∙m⁻¹). This unusual auxetic behavior, ferroelectric polarization, and the electromechanical coupling in monolayer ABP₂X₆ could potentially lead to enormous technologically important applications in nanoelectronics, nanomechanics, and piezoelectrics.     

CdSe/CdS/SiO2 复合纳米球的制备及发光性能

采用两相法合成了CdSe/CdS核-壳结构的量子点, 用氨水催化水解正硅酸乙酯制得复合结构的CdSe/CdS/SiO₂发光纳米球. 通过对量子点用量、氨水用量、反应时间及溶剂比例等实验条件的调节, 得到了单分散性较好, 尺寸在23~145 nm的复合发光纳米球. 利用紫外-可见吸收光谱和荧光发射光谱对其发光性能进行了研究, 同时利用透射电镜(TEM)观察复合纳米球的形貌. 结果表明, 复合发光纳米球样品的最高荧光量子产率可达8%.     

三氟甲基磺酸锌催化选择性合成2-苄基-4-氯苯酚

在温和条件下,Zn(OTf)2能有效催化氯化苄对对氯苯酚的C-苄基化反应,选择性合成杀菌剂2-苄基-4-氯苯酚（BCP）,合成的优化条件为n(对氯苯酚):n(氯化苄)=1.2:1,催化剂Zn(OTf)2对氯化苄摩尔分数为5%,60 ℃下反应6 h,用硝基甲烷为溶剂,氯化苄转化率和产物BCP的产率分别＞99%和94%。     

表面活性剂胶束对MA-AA复合振荡反应的影响

化学振荡反应是一类典型的非线性现象[1-5],研究各种因素对化学振荡反应的动力学控制问题在生物和化学应用中有重要的意义[6,7].生物体系中化学振荡反应实际上是产生于溶胶中(包括高分子溶液和表面活性剂溶液)[8],因此,要模拟生物体系的化学振荡就不能不考虑溶胶对振荡反应的影响.     

核-壳型苏丹红Ⅰ印迹聚合物微球制备及应用研究

以苏丹红Ⅰ为模板分子,苯基-三甲氧基硅烷(PTMOS)为功能单体,乙二醇二甲基丙烯酸酯(EGD-MA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用表面分子印迹技术,在自制的SiO2微球表面成功合成了对苏丹红Ⅰ具有良好选择识别性能的核-壳型印迹聚合物。采用红外光谱和扫描电子显微镜对分子印迹微球进行表征,结果表明该印迹聚合材料壳层厚度约为150 nm;采用静态吸附实验研究印迹材料对模板聚合物的吸附性能和选择特性,结果表明以PTMOS为功能单体的印迹聚合物对苏丹红Ⅰ具有优异的选择吸附性,其分离选择因子为2.62。在吸附过程中,模板分子苏丹红Ⅰ与印迹聚合物形成2种结合位点,2种结合位点的解离常数分别为2.30、10.78 mmol/L,最大表观结合量分别为27.40、128.53μmol/g。将该印迹聚合物作为固相萃取材料,对样品进行固相萃取,结合液相色谱技术成功用于辣椒油中苏丹红Ⅰ的测定。     

PS-PBA粒子分散系的介电弛豫谱解析——同、反离子对弛豫的影响及表界面电参数的计算

制备了近纳米级的聚苯乙烯-丙烯酸丁酯(PS-PBA)复合微球粒子,并在40Hz～110×106Hz的宽频范围测量了该粒子分散在9种电解质中时的介电弛豫谱,发现了与PS微球粒子分散系不同的特异介电弛豫:低频弛豫对反离子种类具有敏感性而高频弛豫则与电解质种类几乎无关;根据Shilov-Dukhin模型和M-W-O模型分别分析了高、低频率的弛豫机制,并通过对介电谱的Cole-Cole拟合获得了各体系的介电参数.进一步利用Hanai方法由介电参数计算获得了所有体系的相参数;详细分析了体系的内部参数受PS-PBA微球自身结构以及电解质种类影响的原因;讨论了离子扩散系数对介电参数的影响,从而得出了低、高频的弛豫特征时间分别由同离子的扩散系数和反离子的扩散系数所决定之结论.最后,结合Grosse宽频介电理论计算了粒子表面的以及双电层的主要电参数,并分析了电解质种类差异对这些电参数的影响.     

Fe3O4/GO/PPy复合材料的制备及其对2-硝基-1,3-苯二酚的吸附性能

采用改进的Hummers法制备了氧化石墨烯,用水热法首次制备了Fe_3O_4/GO/PPy(聚吡咯)三元复合粒子用于处理含2-硝基-1,3-苯二酚(NRC)的废水,研究了其对水中NRC的吸附性能。采用紫外-可见吸收光谱(UV-Vis)、透射电子显微镜(TEM)、傅里叶变换红外光谱(FT-IR)、X射线衍射(XRD)、振动样品磁强计及ζ电位等对所制备复合粒子的结构进行了表征;研究了溶液pH值、吸附剂用量、NRC的初始浓度、吸附时间和温度对吸附NRC的吸附性能的影响,并对吸附过程进行了吸附动力学模拟。结果表明:制备的Fe_3O_4/GO/PPy复合材料为层状分散结构,PPy及Fe_3O_4颗粒无规则地镶嵌在石墨烯片层之间。Fe_3O_4颗粒为多面体晶体结构,尺寸为100～300 nm。Fe_3O_4/GO/PPy具有超顺磁性,40 s可以磁分离,NRC移除率达91.6%;在NRC浓度为200 mg·L~(-1)、pH=5±0.05、温度T=318 K、吸附剂用量10 mg·L~(-1)和吸附时间6 h的条件下Fe_3O_4/GO/PPy对NRC的吸附量最大,达到163.3mg·g~(-1)。NRC吸附动力学符合二级动力学模型,吸附等温线符合Langmuir模型。循环使用5次后,NRC的移除率由最初的91.6%下降至77.6%,说明Fe_3O_4/GO/Ppy磁性复合物的结构具有较好的稳定性,且可以再重复利用。     

An Oscillation Condition for an Electrode－separated Piezoelectric Sensor in Non－electrolyte Liquid

ＡｎＯｓｃｉｌｌａｔｉｏｎＣｏｎｄｉｔｉｏｎｆｏｒａｎＥｌｅｃｔｒｏｄｅ－ｓｅｐａｒａｔｅｄＰｉｅｚｏｅｌｅｃｔｒｉｃＳｅｎｓｏｒｉｎＮｏｎ－ｅｌｅｃｔｒｏｌｙｔｅＬｉｑｕｉｄＳＨＥＮＤａ－ｚｈｏｎｇ，ＨＵＡＮＧＭｉｎｇ－ｓｈａｎ，ＬＩＮＳｏｎｇ，Ｎ...     

Time-Resolved Photoluminescence Spectra of Porous Si

Ｔｉｍｅ－ＲｅｓｏｌｖｅｄＰｈｏｔｏｌｕｍｉｎｅｓｃｅｎｃｅＳｐｅｃｔｒａｏｆＰｏｒｏｕｓＳｉＦＥＩＨａｏ－ｓｈｅｎｇ，ＨＡＮＬｉ，ＣＨＥＹａｎ－ｌｏｎｇ，ＮＩＥＲｕｉ－ｊｕａｎａｎｄＬＩＴｉｅ－ｊｉｎ（ＤｅｐａｒｒｍｅｎｔｏｆＰｈｙｓｉｃｓａｎｄＤ...