基于IPv6校园网的智能选课系统的J2EE架构的设计与实现

通过分析IPv6校园网自主学习模式下的自主选课问题,提出了利用J2EE技术构建基于IPv6校园网的智能选课系统的总体结构及具体实现.     

Hydroxyapatite coating on porous silicon substrate obtained by precipitation process

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HAP) is known as a bioactive and biocompatible material, HAP coatings were used to improve the biocompatible of substrate by many researcher, In this work, HAP thin films on porous silicon (PS) substrates have been prepared by aqueous precipitation method with rapid thermal annealing (RTA) processes. The HAP films had been prepared under the annealing temperature ranging from 300 to 1000 °C. By the measurement of X-ray diffraction (XRD), it was found that for the crystallinity optimization, the heat-treatment at 850–950 °C for 1 h would be favorable. Atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements reveal a dense and smooth surface of the HAP film, and tightly adherence of the coating on porous silicon substrate after sintered. Thus, by this method, porous silicon could be increased its bioactivity and so that could be used in the biomedical area.     

一种实用的MTBF分配方法

本文提出一种简单实用的MTBF(Mean time between failures-平均无故障工作时间)分配方法.这种方法适合于工程系统设计的对分系统的结构(可靠性模型)有了初步的了解,并能估算出各分系统故障率的情况.同时对于需要进行可靠性分配,又苦于对可靠性理论知识缺乏深入了解的人员也非常适用.     

离子表面活性剂胶团对阿斯匹林碱水解反应的影响

离子表面活性剂胶团对阿斯匹林碱水解反应的影响史振民＊刘生昆张祝莲巩育军（延安大学化学系延安７１６０００）关键词表面活性剂，阿斯匹林，碱水解反应，胶团，抑制作用１９９６－０５－０４收稿，１９９６－０８－１２修回阿斯匹林（ＡＳＰ），学名为乙酰水杨酸，有较...     

多路FM－SCM光波系统研制

介绍我们研制的多路ＦＭ－ＳＣＭ（调频副载波复用）光波系统及其性能，讨论了ＳＣＭ光波系统的噪声。该系统主要可用于多路ＣＡＴＶ光纤传输。采用Ｆ－Ｐ腔ＬＤ和ＰＩＮ－ＦＥＴ接收组件，通过系统优化，实现了接收端输出电视图象信号ＳＮＲ＞５５ｄＢ。     

D→Klv～l衰变过程的研究

用光锥QCD求和规则研究D→Klv～_l衰变过程，首先计算D→K跃迁形状因子，通过构造新的关联函数，消除了twist-3波函数的不确定性给计算结果所带来的影响，从而使计算结果更加精确. 计算得到的分支比与最近的实验数据相一致. 关键词： QCD光锥求和规则 D介子半轻衰变 分支比 形状因子     

Ab initio calculations of accurate dissociation energy and analytic potential energy function for the second excited state B1∏ of 7LiH

The reasonable dissociation limit of the second excited singlet state B¹∏ of ⁷LiH molecule is obtained. The accurate dissociation energy and equilibrium geometry of the B¹\Pi state are calculated using a symmetry-adapted-cluster configuration--interaction method in full active space. The whole potential energy curve for the B¹∏ state is obtained over the internuclear distance ranging from about 0.10nm to 0.54nm, and has a least-square fit to the analytic Murrell--Sorbie function form. The vertical excitation energy is calculated from the ground state to the B¹∏ state and compared with previous theoretical results. The equilibrium internuclear distance obtained by geometry optimization is found to be quite different from that obtained by single-point energy scanning under the same calculation condition. Based on the analytic potential energy function, the harmonic frequency value of the B¹∏ state is estimated. A comparison of the theoretical calculations of dissociation energies, equilibrium interatomic distances and the analytic potential energy function with those obtained by previous theoretical results clearly shows that the present work is more comprehensive and in better agreement with experiments than previous theories, thus it is an improvement on previous theories.     

商标数据库存储模式及其检索算法研究

依据商标专家的先验知识和基于内容的图像检索技术，提出了一种新的商标库存储结构，并依据该存储结构设计了以三级检索算法为核心的实用商标登记注册管理系统，对于检索算法，一级检索采用人工确认，二级检索采用傅立叶描述子作为边缘特征向量，三级检索采用hu不变矩组作为矩特征向量，从而达到提高商标申请注册中的检索速度和查准率。     

Improved coating method for uniform polymer layer in infrared hollow fiber

An improved coating method was proposed in order to form a uniform polymer layer in the fabrication of cyclic olefin polymer-coated silver (COP/Ag) hollow fiber. A COP solution was flowed in a closed loop, in which the silver-coated tube was used as a part of the loop. Owing to the constant flowing speed of the COP solution and the airtight flowing environment, a COP layer was uniformly formed. The hollow fibers attain high performance and deliver multi-wavelength laser light from the infrared to the visible simultaneously. The method was successfully applied to the fabrication of practical hollow fibers with 2 m length for the near and mid-infrared lasers.     

Synthesis and application as polymer electrolyte of hyperbranched polyether made by cationic ring‐opening polymerization of 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxymethyl}‐3′‐methyl‐oxetane

A novel cyclic ether monomer 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxy‐methyl}‐3′‐methyloxetane (HEMO) was prepared from the reaction of 3‐hydroxymethyl‐3′‐methyloxetane tosylate with triethylene glycol. The corresponding hyperbranched polyether (PHEMO) was synthesized using BF₃·Et₂O as initiator through cationic ring‐opening polymerization. The evidence from ¹H and ¹³C NMR analyses revealed that the hyperbranched structure is constructed by the competition between two chain propagation mechanisms, i.e. active chain end and activated monomer mechanism. The terminal structure of PHEMO with a cyclic fragment was definitely detected by MALDI‐TOF measurement. A DSC test implied that the resulting polyether has excellent segment motion performance potentially beneficial for the ion transport of polymer electrolytes. Moreover, a TGA assay showed that this hyperbranched polymer possesses high thermostability as compared to its liquid counterpart. The ion conductivity was measured to reach 5.6 × 10^?5 S/cm at room temperature and 6.3 × 10^?4 S/cm at 80 °C after doped with LiTFSI at a ratio of Li:O = 0.05, presenting the promise to meet the practical requirement of lithium ion batteries for polymer electrolytes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3650–3665, 2006