Heteroatom‐Doped Carbon Dots (CDs) as a Class of Metal‐Free Photocatalysts for PET‐RAFT Polymerization under Visible Light and Sunlight

A key challenge of photoregulated living radical polymerization is developing efficient and robust photocatalysts. Now carbon dots (CDs) have been exploited for the first time as metal‐free photocatalysts for visible‐light‐regulated reversible addition–fragmentation chain‐transfer (RAFT) polymerization. Screening of diverse heteroatom‐doped CDs suggested that the P‐ and S‐doped CDs were effective photocatalysts for RAFT polymerization under mild visible light following a photoinduced electron transfer (PET) involved oxidative quenching mechanism. PET‐RAFT polymerization of various monomers with temporal control, narrow dispersity (?≈1.04), and chain‐end fidelity was achieved. Besides, it was demonstrated that the CD‐catalyzed PET‐RAFT polymerization was effectively performed under natural solar irradiation.     

钛铁矿制备二氧化钛-四氧化三铁复合材料及其光催化应用

TiO_2因具有多种优异的特性被广泛应用在半导体光催化领域,但是纳米结构的TiO_2颗粒细微,在进行光催化反应之后,难以回收再利用。本文以廉价钛铁矿为原料制备光催化剂TiO_2,同时利用副产物铁合成Fe_3O_4,并采用简单温和的浸渍法制备Fe_3O_4/TiO_2磁性复合材料。通过XRD、FT-IR、SEM、EDS等手段对材料形态结构进行表征分析,并以光降解有机污染物若丹明B为探针反应,考察其光催化性能。结果表明,质量比为1∶10的Fe_3O_4/TiO_2复合材料结构稳定、分散均匀,具有最优的光催化活性(波长356nm下反应3h,若丹明B降解率达到64.0%),并表现出良好的重复性。同时,动力学结果显示降解符合一级反应动力学。     

高比能高功率全石墨烯锂离子电容器

石墨烯由于拥有超高比表面积和超高电导率而被作为电化学电容器材料广泛研究.本文采用树脂为碳源,通过一种方便快捷的树脂交换法制备一种具有高比表面积的多级孔三维石墨烯（3DG）.经过此种方法的催化、造孔、热处理等主要工艺步骤后,可显著增加石墨烯材料的小、介孔数量,从而提高材料的电化学性能.通过BET测试表明,3DG的比表面积可达2400 m²/g,孔体积达到2.0 cm³/g.以3DG作为正负极材料制备高比能量高功率型锂离子电容器（3DG-LIC）,可使3DG-LIC的工作电压从传统超级电容器的2.5 V扩展到4.0 V,能量密度也从20 Wh/kg提高到105 Wh/kg.另外,相同的化学和微观结构能很好地平衡正负极的容量及速率,使高比能量高功率的3DG-LIC具有更宽阔的应用领域.     

Structural Characterization and In Vitro Antitumor Activity of a Novel Exopolysaccharide from <Emphasis Type="Italic">Lachnum</Emphasis> YM130

Exopolysaccharide of Lachnum YM130 (LEP) was purified by diethylaminoethyl cellulose 52 and Sepharose CL-6B column chromatography. LEP-2a was identified to be a homogeneous component with an average molecular weight of 1.31?×?10⁶ Da, which was consisted of mannose and galactose in a molar ratio of 3.8:1.0. The structure of LEP-2a was characterized by methylation analysis, FT-IR analysis, and NMR analysis. Results indicated that LEP-2a was a galactomannan with a backbone, composed of 1,2-linked-α-D-Manp, 1,2,6-linked-α-D-Manp, 1,3,4-linked-α-D-Manp, and 1,3-linked-β-D-Galp, which was substituted at O-2, O-3, O-4, and O-6 by branches. In vitro antitumor activity assay proved that LEP-2a could significantly enhance the inhibitory effectiveness of 5-FU on Hela cells at the concentrations of 100, 200, 300, and 400 μg/mL. The above results suggested that LEP-2a could be seen as a potential source for developing novel antineoplastic agents.     

CO<Subscript>2</Subscript>-responsive Polymeric Fluorescent Sensor with Ultrafast Response

Abstract Response speed is one of the most important evaluation criteria for CO₂ sensors. In this work, we report an ultrafast CO₂ fluorescent sensor based on poly[oligo(ethylene glycol) methyl ether methacrylate]-b-poly[N,N-diethylaminoethyl methacrylate-r-4-(2-methylacryloyloxyethylamino)-7-nitro-2,1,3-benzoxadiazole] [POEGMA-b-P(DEAEMA-r-NBDMA)], in which DEAEMA units act as the CO₂-responsive segment and 4-nitrobenzo-2-oxa-1,3-diazole (NBD) is the chromophore. The micelles composed of this copolymer could disassemble in 2 s upon CO₂ bubbling, accompanying with enhanced fluorescence emission with bathochromic shift. Furthermore, the quantum yield of the NBD chromophore increases with both the CO₂ aeration time and the NBD content. Thus we attribute the fluorescent enhancement to the inhibition of the photo-induced electron transfer between unprotonated tertiary amine groups and NBD fluorophores. The sensor is durable although it is based on “soft” materials. These micellar sensors could be facilely recycled by alternative CO₂/Ar purging for at least 5 times, indicating good reversibility.     

HTLC: A Viable Approach to Fast LC of Biogenic Amines in Food with Legacy Equipment

Nowadays, there is a demand for fast liquid chromatography (LC) of biogenic amines in food with the equipment available in the average laboratory. To this end, high-temperature liquid chromatography (HTLC) is presented in this study as a viable option, working on a conventional LC platform at moderately high temperatures up to 80 °C. The LC platform was adapted by including an appropriate length of stainless-steel microbore tubing as a preheater. Biogenic amines as benzoyl derivatives showed good thermostability on a thermally rugged column (150?×?4.6 mm, 5 µm). As a model application the HTLC conditions were developed for wine separation. The separation selectivity changed considerably with temperature in the range 36–84 °C, and baseline resolution was obtained only at temperatures well above ambient. At 73 °C oven temperature, the system allowed a flow rate as high as 3 mL min^?1 with the backpressure not exceeding 195 bar (2800 psi). The separation took less than 5 min, comparably fast to documented fast LC separations, and typically at least three to five times faster than a conventional separation.     

Multidimensional Gas Chromatography–Mass Spectrometry Method for Fingerprinting Polycyclic Aromatic Hydrocarbons and Their Alkyl-Homologs in Crude Oil

The composition of polycyclic aromatic hydrocarbons in crude oil is usually too complex to use standard capillary gas chromatography to separate all of the components. In this study, a multidimensional gas chromatography–mass spectrometry (GC-MS) technique was used to analyze polycyclic aromatic hydrocarbon fractions of crude oil collected from the Dongying oil field in the Bohai Sea. A DB-17MS column (30?m?×?0.25?mm?×?0.25?µm) was used as a prefractionating column and only selected heart-cuts were transferred to the second chromatographic dimension (HP-5MS, 15?m?×?0.25?mm?×?0.25?µm) by a pressure-adjusted continual flow-type switching device for quantification of the polycyclic aromatic hydrocarbons. The chromatographic elements and parameters, such as detector selection and column combinations, were optimized. Naphthalene, phenanthrene, fluorene, dibenzothiophene, chrysene, and their C₁–C₄ alkyl homologs were identified. The profile of the polycyclic aromatic hydrocarbons obtained using the multidimensional GC-MS method was compared with the results obtained by traditional one-dimensional GC-MS.     

Electrophoretic Determination of Formaldehyde in Human Urine: Application to Alzheimer’s Disease

The primary clinical diagnosis of Alzheimer’s disease is mainly based on medical history and neuropsychiatric inventory. It is urgent to seek biological indicators with better sensitivity and higher specificity to clinically diagnose and evaluate Alzheimer’s disease. In this work, an electrophoretic method based on 2-thiobarbituric acid derivatization and amperometric detection was developed to determine formaldehyde as a urinary biomarker of Alzheimer’s disease. Under the optimum conditions, the formaldehyde derivative was well separated from the coexisting interferences in urine sample. The limit of detection for formaldehyde was 80.0?nM (2.4?ng/?mL) based on an electrophoretic stacking technology. The average recovery values were in the range of 91.7–110%, and the relative standard deviation values were less than 4.1%. This method has been applied to analyze human urine samples from healthy volunteers and patients with different degrees of Alzheimer’s disease. The assay results showed that the content of urinary formaldehyde in patients suffering Alzheimer’s disease was significantly higher than that in healthy subjects (P?相似文献   

The Narrowest Band Gap Ever Observed in Molecular Ferroelectrics: Hexane‐1,6‐diammonium Pentaiodobismuth(III)

Narrow band gaps and excellent ferroelectricity are intrinsically paradoxical in ferroelectrics as the leakage current caused by an increase in the number of thermally excited carriers will lead to a deterioration of ferroelectricity. A new molecular ferroelectric, hexane‐1,6‐diammonium pentaiodobismuth (HDA‐BiI₅), was now developed through band gap engineering of organic–inorganic hybrid materials. It features an intrinsic band gap of 1.89 eV, and thus represents the first molecular ferroelectric with a band gap of less than 2.0 eV. Simultaneously, low‐temperature solution processing was successfully applied to fabricate high‐quality ferroelectric thin films based on HDA‐BiI₅, for which high‐precision controllable domain flips were realized. Owing to its narrow band gap and excellent ferroelectricity, HDA‐BiI₅ can be considered as a milestone in the exploitation of molecular ferroelectrics, with promising applications in high‐density data storage and photovoltaic conversion.     

A One‐Step Route to CO2‐Based Block Copolymers by Simultaneous ROCOP of CO2/Epoxides and RAFT Polymerization of Vinyl Monomers

The one‐step synthesis of well‐defined CO₂‐based diblock copolymers was achieved by simultaneous ring‐opening copolymerization (ROCOP) of CO₂/epoxides and RAFT polymerization of vinyl monomers using a trithiocarbonate compound bearing a carboxylic group (TTC‐COOH) as the bifunctional chain transfer agent (CTA). The double chain‐transfer effect allows for independent and precise control over the molecular weight of the two blocks and ensures narrow polydispersities of the resultant block copolymers (1.09–1.14). Notably, an unusual axial group exchange reaction between the aluminum porphyrin catalyst and TTC‐COOH impedes the formation of homopolycarbonates. By taking advantage of the RAFT technique, it is able to meet the stringent demand for functionality control to well expand the application scopes of CO₂‐based polycarbonates.