正癸烷与二甲苯在超临界压力下的热裂解

采用连续流动装置对正癸烷和二甲苯在超临界压力下的热裂解对比研究. 用气相色谱和色质联用仪对其气相产物和液相产物进行分析, 计算气相产物产率和裂解转化率, 并运用计算化学方法获得正癸烷和二甲苯不同化学键的键能, 从实验和理论上分析其裂解反应的难易程度和裂解规律. 实验结果表明, 在4 MPa和650、700、750 ℃条件下, 正癸烷比二甲苯更容易裂解, 正癸烷裂解产物以C₁-C₃小分子的烃类和氢气为主, 而二甲苯裂解产物主要为乙苯、甲苯和其它芳香类化合物; 键能计算结果表明, 正癸烷碳链骨架的C－C键能和C－H键能均较小, 裂解反应的诱发步骤应该是C－C键断裂, 而二甲苯苯环上C－C和C－H键能均较大, 裂解诱发步骤应该是侧链甲基脱氢反应. 因此正癸烷裂解反应以C－C键断裂和脱氢反应为主, 二甲苯裂解主要发生侧链甲基C－C键断裂和脱氢反应, 而芳环则比较稳定, 理论计算键能分析与裂解实验结果一致.     

An improved derivatization method for sensitive determination of fatty acids by high-performance liquid chromatography using 9-(2-hydroxylethyl)-carbazole as derivatization reagent with fluorescence detection

Summary Tagging techniques with reagents used for fluorescent detection for short and long-chain fatty acids using high-performance liquid chromatography are evaluated in terms of the tagging reactions, handing, flexibility, stability of the reagents. Emphasis is given to the applications of the tagging techniques to relatively high molecular mass fatty acids. The fatty acids or carboxylic compounds were derivatized to their corresponding esters with 9-(2-hydroxy ethyl)-carbazole (HEC) in acetonitrile at 60°C with N, N′-carbonyldiimidazole (CDI) as a coupling agent in the presence of 4-dimethylaminopyridine (DMAP). A mixture of esters of C₁−C₂₀ fatty acids was completely separated with 45 min using gradient elution on a reversed-phase C₁₈ column. The maximum fluorescence emission for the derivatized fatty acids is at 365 nm (λ_ex 293 nm). Studies on derivatization conditions indicated that fatty acids react rapidly and smoothly with HEC in the presence of CDI and DMAP in acetonitrile to give the corresponding sensitively fluorescent derivatives. The application of this method to the analysis of long chain fatty acids in plasma is also investigated. The LC separation shows good selectivity and reproducibility for fatty acids derivatives. The relative standard deviations (n=6) for each fatty acid derivative are <5.0%. The detection limits are at 38–57 fmol levels for C₁₄−C₂₀ fatty acids and lower levels for <C₁₄ fatty acids.     

Improving Construction for Connected Dominating Set with Steiner Tree in Wireless Sensor Networks

The connected dominating set plays an important role in ad hoc wireless networking. Many constructions for approximating the minimum connected dominating set have been proposed in the literature. In this paper, we propose a new one with Steiner tree, which produces approximation solution within a factor of 6.8 from optimal. This approximation algorithm can also be implemented distributedly.     

离焦对激光通信接收视场的影响分析

为了降低自由空间激光通信中对准难度,本文提出了采用离焦的方法以增大接收视场角。以满足通信所需最低能量(-35 d Bm)为基准,理论推导了探测器接收能量、接收视场角(FOV)、离焦接收能量及离焦量之间的相互关系,并通过Matlab仿真,分析对比了离焦接收能量和离焦量对接收视场角的影响。结果显示,当离焦量为0.5 mm时,离焦接收能量从-20.9 d Bm提高到-4.1 d Bm,接收视场角能增大0.27 mrad;当离焦接收能量为-4.1 d Bm时,离焦量从0.2 mm扩大到1.0 mm,视场角能增大1.75 mrad。通过对比表明,提高离焦接收能量以及扩大离焦量都可以增加接收视场角,且扩大离焦量的效果相对比较明显,这对后续离焦系统的设计提供了理论指导依据。     

不同入射角度下强流脉冲电子束能量沉积剖面和束流传输系数模拟计算

 强流脉冲电子束在材料中的能量沉积剖面、能量沉积系数和束流传输系数受其入射角的影响很大，理论计算了0.5~2.0MeV的电子束以不同的入射角在Al材料中的能量沉积剖面和能量沉积系数，并且还计算了0.4~1.4MeV电子束以不同入射角穿透不同厚度C靶的束流传输系数。计算结果表明，随着入射角的增大，靶材表面层单位质量中沉积的能量增大，电子在靶材料中穿透深度减小，能量沉积系数减小，相应的束流传输系数也减小；能量为0.5~2.0MeV的电子束当入射角在60°~70°时在材料表面层单位质量中沉积的能量较大。     

1.54μmEr3+,Yb3+共掺玻璃激光器的速率方程及数值分析

LD抽运共掺Er,Yb玻璃激光器中的跃迁过程较复杂,针对双掺离子之间的能量传递和Er3+的多种跃迁过程,给出了详细的准三能级系统的速率方程,在合理简化后进行了数值分析,分析了Er3+掺杂浓度和介质长度、抽运光斑、输出镜透过率、谐振腔长、抽运光的椭圆度等因素对激光阈值及斜率效率的影响. 关键词： 1.54μm激光 Er3+玻璃 速率方程 数值分析     

Brightening single-photon emitters by combining an ultrathin metallic antenna and a silicon quasi-BIC antenna

Bright single-photon emitters(SPEs)are fundamental components in many quantum applications.However,it is difficult to simultaneously get large Purcell enhancements and quantum yields in metallic nanostructures because of the huge losses in the metallic nanostructures.Herein,we propose to combine an ultrathin metallic bowtie antenna with a silicon antenna above a metallic substrate to simultaneously get large Purcell enhancements,quantum yields,and collection efficiencies.As a result,the brightness of SPEs in the hybrid nanostructure is greatly increased.Due to the deep subwavelength field confinement(mode size<10 nm)of surface plasmons in the ultrathin metallic film(thickness<4 nm),the Purcell enhancement of the metallic bowtie antenna improves by more than 25 times when the metal thickness decreases from 20 nm to 2 nm.In the hybrid nanostructures by combining an ultrathin metallic bowtie antenna with a silicon antenna,the Purcell enhancement(Fp≈2.6×10⁶)in the hybrid nanostructures is 63 times greater than those(≤4.1×10⁴)in the previous metallic and hybrid nanostructures.Because of the reduced ratio of electromagnetic fields in the ultrathin metallic bowtie antenna when the high-index silicon antenna is under the quasi-BIC state,a high quantum yield(QY≈0.70)is obtained.Moreover,the good radiation directivity of the quasi-BIC(bound state in the continuum)mode of the silicon antenna and the reflection of the metallic substrate result in a high collection efficiency(CE≈0.71).Consequently,the overall enhancement factor of brightness of a SPE in the hybrid nanostructure is EF?≈Fp×QY×CE≈1.3×10⁶,which is 5.6×10² times greater than those(EF?≤2.2×103)in the previous metallic and hybrid nanostructures.     

LED全彩大屏幕同步显示系统设计

根据LED全彩大屏幕同步显示控制系统的设计技术指标要求,讨论了系统的组成,确定了以DVI为数字接口,采用串行LVDS传输方式的LED全彩大屏同步显示方案.采用数据重组方法对像素数据进行分场存储,创造性地采用了变频方法对存储数据进行分场扫描,从而实现了无亮度损失的分场显示.对关键模块的仿真结果证明了系统设计的可行.     

自适应开启时间的电流模Buck控制器

设计了一种基于自适应开启时间（Adaptive On-Time, AOT）控制的电流模buck型DC-DC控制器电路,利用输入电压前馈和输出电压反馈技术来获得开启时间,并提出了一种采样保持和充电时间超前电路实现了开启时间的自适应控制。电流模AOT控制不仅获得了优异的瞬态响应速度,而且克服了电压模开启时间控制的环路稳定性对输出电压纹波的依赖。电流模AOT控制无固定频率峰值电流控制中的亚谐波振荡问题,不需要斜坡补偿。自动跳跃式（Auto-Skip）脉冲频率调制（Pulse Frequency Modulation, PFM）模式有效地改善了轻负载下的转换效率。芯片采用UMC 0.6-μm BCD工艺投片验证,文章最后给出了详细的测试结果。     

AuQ+碰撞氦原子单电离的全微分截面

利用三体扭曲波计算了3.6 MeV/amu的Au^Q+ (Q=24,53)碰撞氦原子单电离的全微分截面,其结果与实验数据和其它理论进行了比较,表明全微分截面受到高电荷入射粒子的强烈影响,敲出的电子被“拖拽”沿着向前的方向. 但是,所有的理论结果都不能呈现实验上全微分截面的独特的向前峰.