(TiNi)_x(x=2~4)团簇结构和电子结构

从团簇角度对TiNi形状记忆合金进行了量子化学从头算研究。设计并优化了等原子比(TiNi)x(x=2~4)簇的多种可能几何结构,并对较稳定构型进行电子结构的分析。结果表明,等原子比的(TiNi)n团簇以TiNi成键为主要分子骨架,小团簇有较多能量接近的异构体,TiTi成键对能量降低有较大贡献。     

表面包覆改性对纳米CeO2分散性的影响

了改善纳米CeO2在Zn-Al类共晶合金中的分散性,采用超声液相包覆法对纳米CeO2进行表面活性剂表面包覆改性,并用AES测定了包覆层的厚度,用TEM研究了CeO2的团聚状况,用TGA分析了有机物包覆层的炭化温度范围,最后用FE-SEM观察了CeO2在复合材料中的分散情况。结果表明,包覆在纳米CeO2表面的厚度约为20 nm的表面活性剂层提高了微粒的分散性,而且该包覆层在495℃时已经炭化。热力学计算的结果也表明,炭化层能与氧化膜反应,该反应提高了CeO2与基体间的润湿性,并使其均匀分布在基体合金中。     

Synthesis and Characterization of Novel Orange-emitting Iridium（Ⅲ） Complexes with Diphenylquinoline Ligands Containing Fluorinated Substituent

Three new cyclometalated iridium（m） complexes based on ligands of diphenylquinoline with fluorinated subsfituents were prepared, and characterized by elemental analysis （EA）, ^1H NMR, and mass spectroscopy （MS）. The photophysical and electrophosphorescent properties of the complexes were briefly discussed.     

含锆层柱蒙脱石对1,2,4三甲基苯歧化反应的催化作用

用离子共聚法合成了硅锆层柱蒙脱石（ＳｉＺｒＰＩＬＭ）和铁锆层柱蒙脱石（ＦｅＺｒＰＩＬＭ），考察了它们对１，２，４三甲基苯（１，２，４ＴｒＭＢ）歧化反应的催化性能．１，２，４ＴｒＭＢ在催化剂样品上可发生歧化反应和异构化反应，歧化反应选择性达８０％以上．随着催化剂预处理温度的提高，１，２，４ＴｒＭＢ转化率下降，歧化反应选择性和四甲基苯（ＴｅＭＢ）中１，２，４，５ＴｅＭＢ含量则升高．催化剂对１，２，４ＴｒＭＢ歧化反应有择形催化作用，１，２，４，５ＴｅＭＢ和间二甲苯、邻二甲苯为主要产物，并且其含量偏离其热力学平衡组成，ＴｅＭＢ中１，２，４，５ＴｅＭＢ的含量在８５％以上．     

N-取代苯并咪唑和N-取代-2-硫代噻唑烷酮类化合物的质谱研究

本文所研究的7种N-取代苯并咪唑和硫代噻唑烷酮类化合物是一类新合成的具有较高杀菌活性的化合物。本文利用电子轰击质谱技术对表中所列的化合物进行了研究。在高分辨精确质量测量和亚稳离子测定的基础上着重讨论了分子内3、4位C—C键的断裂和与杂环     

A New Efficient Synthesis of p-Nitrocalix[4]arene

A new efficient synthesis of p-nitrocalix[4]arene from calix[4]arene by using nitrogen dioxide is described.The compound is an useful intermediates for the introduction of other functional groups to obtain N containing substituted calix[4]arene.The reaction mechanism is briefly discussed.     

Preparation and characterization of C16 monolithic columns for capillary electrochromatography

A series of methacrylamide-based C16 monolithic columns were prepared and characterized to determine how their porous structural properties and chromatographic behavior are affected by the percentages of functional monomer, base monomer, and cross-linker in the polymerization solution. Baseline separation of 6 neutral compounds can be readily obtained in an optimized column. Furthermore, the effects of organic additive in the mobile phase, operating voltages, and temperature on retention behaviors and separation efficiencies were also studied. The separation mechanism is also discussed. High column efficiency and good reproducibility indicate that the monolithic columns hold considerable promise.     

A novel three-component reaction for the synthesis of new 4-azafluorenone derivatives

Reaction of arylidenemalononitriles, 1,3-indanedione, and mercaptoacetic acid or 4-methylbenzenethiol is successfully carried out using microwave heating. It is an efficient and promising synthetic strategy to build the indenopyridine skeleton.     

Characterization of low molecular weight components of [(ViMe2SiO1/2)x(PhSiO3/2)y(SiO4/2)z], [(ViMe2SiO1/2)x(SiO4/2)y], and [(SiO4/2)x(HO1/2)y(tBuO1/2)z] silsesquioxanes by electrospray ionization fourier transform mass spectrometry (ESI-FTMS)

This paper describes the characterization of low molecular weight components of four materials using electrospray ionization Fourier transform mass spectrometry (ESI-FTMS). The materials in the current study are [(ViMe₂SiO_1/2)_x(PhSiO_3/2)_y(SiO_4/2)_z] (MTQ), [(ViMe₂SiO_1/2)_x(SiO_4/2)_y] (MQ), and [(SiO_4/2)_x(HO_1/2)_y(^tBuO_1/2)_z] (Q) silsesquioxanes. Accurate mass measurements coupled with knowledge of resin chemistry afforded siloxane composition determination that was used to propose specific structures for the oligomers. Branched or linear (T_nQ_mM_n+2m+2), and monocyclic (T_nQ_mM_n+2m) structures are predominant structures for the low molecular weight species in MTQ. For MQ and Q, more condensed structures, such as partially opened cage structures (Q_mM_2m?6 and Q_mM_2m?8), were identified. The differences between MQ, Q, and MTQ are likely attributed to differences in intrinsic structure and reactivity of T and Q building blocks. The structural information obtained for these oligomeric species will ultimately provide a better understanding of new resin materials and their associated physical properties.     

超临界二氧化碳在高分子合成及加工领域的应用

重点概述了近年来超临界二氧化碳作为环境友好介质在高分子合成与加工方面研究的新进展,具体介绍了在超临界二氧化碳中丙烯酸的合成及疏水改性方面所做的工作,并在此基础上,展望超临界二氧化碳作为高分子合成介质的前景。