激光光束质量因子的研究进展

本文详细分析了各种光场下光束质量M2因子。在不同的场中,A.E.Siegman当初所定义的M2因子,已经有了很大的变化,因而M2因子的特性也与当初不同,不仅M2因子可以大于等于1,而且可以小于1,甚至小于0。其反映的物理意义,也从经典场中的衍射极限倍数,变化为非经典场中的准直性量度以及对空间相干性的某些反映。此外还列举并分析了几种特殊的光束质量因子,最后讨论了M2因子应用的问题并指出了其局限性。     

无创血压测量方法的研究

简要介绍了血压测量技术的发展概况，重点介绍了示渡法工作原理、判别准则和方法比较，对测量算法进行了详细介绍，并结合MOTORLA公司的MC68HC908LJ12简要介绍了示波法电子血压计实现方法，最后就影响血压测量的主要因素进行了简要分析。     

A full-duplex radio-over-fiber system based on optical carrier suppression and reuse

We have experimentally demonstrated a full-duplex radio-over-fiber system using a single light source at central station (CS). Optical carrier suppression modulation scheme was employed to generate 40-GHz optical millimeter wave and up-convert the baseband signal simultaneously at CS for downlink transmission while the same optical carrier was reused at base station for uplink connection. The bidirectional full-duplex 2.5-Gb/s data was successfully transmitted over 40-km standard single-mode fiber (SMF-28) for both upstream and downstream channels with less than 2-dB power penalty. This system shows simple cost-efficient configuration and good performance over long-distance delivery.     

高帧速摄像器

本文介绍了高帧速摄像器的设计、制造、工作和性能。该高帧速有３６０×３６０像素、摄像速度高达５×１０５帧／秒，该摄像器读出电路类似于帧转移ＣＣＤ，由四部分组成     

功率GaAs MESFET的热阻测试

阐述了功率ＧａＡｓＭＥＳＦＥＴ器件热阻测试中温敏参数ＶＧＳＦ和测试电流Ｉｍ的选取，给出了１～５Ｗ器件典型温敏参数的温度测试系数Ｍ与测试电流Ｉｍ的关系。讨论了测试延迟时间ｔｍｄ对△ＶＧＳＦ测量值的影响和三种校正方法。     

Completeness and unbiased estimation of mean vector in the multivariate group sequential case

We consider estimation after a group sequential test about a multivariate normal mean, such as a χ² test or a sequential version of the Bonferroni procedure. We derive the density function of the sufficient statistics and show that the sample mean remains to be the maximum likelihood estimator but is no longer unbiased. We propose an alternative Rao-Blackwell type unbiased estimator. We show that the family of distributions of the sufficient statistic is not complete, and there exist infinitely many unbiased estimators of the mean vector and none has uniformly minimum variance. However, when restricted to truncation-adaptable statistics, completeness holds and the Rao-Blackwell estimator has uniformly minimum variance.     

ASYMPTOTIC APPROXIMATION METHOD AND ITS CONVERGENCE ON SEMI-INFINITE PROGRAMMING

The aim of this article is to discuss an asymptotic approximation model and its convergence for the minimax semi-infinite programming problem. An asymptotic surrogate constraints method for the minimax semi-infinite programming problem is presented by making use of two general discrete approximation methods. Simultaneously, the consistence and the epi-convergence of the asymptotic approximation problem are discussed.     

Synthesis and properties of noncoplanar rigid‐rod aromatic polyhydrazides and poly(1,3,4‐oxadiazole)s containing phenyl or naphthyl substituents

Two new phenyl‐ and naphthyl‐substituted rigid‐rod aromatic dicarboxylic acid monomers, 2,2′‐diphenylbiphenyl‐4,4′‐dicarboxylic acid ( 4 ) and 2,2′‐di(1‐naphthyl)biphenyl‐4,4′‐dicarboxylic acid ( 5 ), were synthesized by the Suzuki coupling reaction of 2,2′‐diiodobiphenyl‐4,4′‐dicarboxylic acid dimethyl ester with benzeneboronic acid and naphthaleneboronic acid, respectively, followed by alkaline hydrolysis of the ester groups. Four new polyhydrazides were prepared from the dicarboxylic acids 4 and 5 with terephthalic dihydrazide (TPH) and isophthalic dihydrazide (IPH), respectively, via the Yamazaki phosphorylation reaction. These polyhydrazides were amorphous and readily soluble in many organic solvents. Differential scanning calorimetry (DSC) indicated that these hydrazide polymers had glass transition temperatures in the range of 187–234 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the range of 300–400 °C. The resulting poly(1,3,4‐oxadiazole)s exhibited T_g's in the range of 252–283 °C, 10% weight‐loss temperature in excess of 470 °C, and char yield at 800 °C in nitrogen higher than 54%. These organo‐soluble polyhydrazides and poly(1,3,4‐oxadiazole)s exhibited UV–Vis absorption maximum at 262–296 and 264–342 nm in NMP solution, and their photoluminescence spectra showed maximum bands around 414–445 and 404–453 nm, respectively, with quantum yield up to 38%. The electron‐transporting properties were examined by electrochemical methods. Cyclic voltammograms of the poly(1,3,4‐oxadiazole) films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited reversible reduction redox with E_onset at ?1.37 to ?1.57 V versus Ag/AgCl in dry N,N‐dimethylformamide solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6466–6483, 2006     

Effect of the pore surface modification of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes

We have investigated the effect of the surface state and surface treatment of the pores of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes. Shirasu porous glass (SPG) was used as the inorganic substrate, and methyl acrylate was used as the grafting monomer. The grafting rate increased as the density of silanol on the SPG substrate increased. This result suggests that radicals are generated mainly at the silanol groups on the pore surface by plasma irradiation. The SPG substrates were treated with silane coupling agents used to control the mass of organic material bonded to the pore surface. The thickness of the grafted layer became thinner as the mass of organic material bonded to the pore surface of SPG increased. This decrease in the thickness of the grafted layer could be explained by the decrease in the penetration depth of vacuum ultraviolet rays contained in plasma having a wavelength of less than 160 nm that generated radicals in the pores of the substrate. The thickness of the grafted layer inside the SPG substrates could be controlled through the control of the mass of organic material bonded to the pore surface of the SPG substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 846–856, 2006     

Synthesis of poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyl groups and its further initiation of the grafting polymerization of styrene

A new stratagem for the synthesis of amphiphilic graft copolymers of hydrophilic poly(ethylene oxide) as the main chain and hydrophobic polystyrene as the side chains is suggested. A poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyls [poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide)] was first prepared by the anionic ring‐opening copolymerization of ethylene oxide and 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and then the graft copolymerization of styrene was completed with benzoyl peroxide as the initiator in the presence of poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide). The polymerization of styrene was under control, and comblike, amphiphilic poly(ethylene oxide)‐g‐polystyrene was obtained. The copolymer and its intermediates were characterized with size exclusion chromatography, ¹H NMR, and electron spin resonance in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3836–3842, 2006