Dynamic bandwidth allocation for quality-of-service over Ethernet PONs

Ethernet-based passive optical network (EPON) technology is being considered as a promising solution for next-generation broadband access networks due to the convergence of low-cost Ethernet equipment and low-cost fiber infrastructures. A major feature for this new architecture is the use of a shared transmission media between all users; hence, medium access control arbitration mechanisms are essential for the successful implementation of EPON: i.e., to ensure a contention-free transmission and provide end users with equal access to the shared media. We propose to use the multipoint control protocol defined by the IEEE 802.3ah task force to arbitrate the transmission of different users, and we present different dynamic bandwidth allocation (DBA) algorithms to allocate bandwidths effectively and fairly between end users. These DBA algorithms are also augmented to support differentiated services, a crucial requirement for a converged broadband access network with heterogeneous traffic. We show that queueing delays under strict bandwidth allocation algorithms result in an unexpected behavior for certain traffic classes, and we suggest the use of DBA with appropriate local queue management to alleviate this inappropriate behavior. We conduct detailed simulation experiments to study the performance and validate the effectiveness of the proposed protocols.     

PPT光纤波片耦合模方程的解析解

理论分析了PPT光纤波片耦合模方程，得出了一定条件下的解析解，将该解析解和渐进近似结果进行了比较，它们在实际应用的PPT光纤波片中具有很好的一致性。     

预测气吹精密播种机排种质量的一种简易方法

通过对气吹式精密播种机田间试验资料的相关分析，发现合格指数Ａ与｜Ｄ－Ｍ｜（重播指数与漏播指数之差的绝对值）之间里极显著负相关（ｒ＝－０．９３１２）。在对数据作进一步回归分析的基础上，本文建立了一套“由排种粒数预测排种质量”的方法。     

Electromagnetic micromirror array with single-crystal silicon mirror plate and aluminum spring

We have designed and fabricated an addressable 4 /spl times/ 4 array of micromirrors capable of providing up to 90/spl deg/ of angular deflection. Each micromirror comprises a single-crystalline silicon mirror plate supported by aluminum springs, which provides an extremely flat reflective surface and a compliant spring material that enables the integration of the device into a limited area without mitigating its performance (i.e., total angular deflection). The device is fabricated using a combination of surface and bulk micromachining processes, such as electroplating, bulk wet etching and XeF/sub 2/ etch processes. Selective actuation is accomplished by the use of an electrostatic clamping force on each mirror plate. A mirror rotation angle of more than 80/spl deg/ can be obtained by applying an external magnetic field, and this angle can be further increased by the use of an electrostatic force. The designed structure can be used in microphotonic applications.     

共面转换液晶显示器中获得对比度高于1:600的新技术

薄膜晶体管液晶电视(TFT-LCD TV)因为具有薄、轻、紧凑和可随意放置的特点，已经占据了大部分电视机市场。除了这些物理特性以外，最重要的特性是已具有了良好像质的对比度。为了将对比度提高到1：600以上，对偏振片膜、背光源板、滤色片树脂、电极锥角和摩擦条件等都进行了研究。优化的背光板组合，光滑的电极锥角和摩擦方法的控制是提高对比度的主要控制因素。应用新开发的滤色片树脂，对获得高对比度最为有效。     

Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer

The laser cladding of Fe-based alloys on a medium carbon steel substrate was performed using a CO₂ laser and Ar shielding gas that was blown into a molten pool. The microstructure and cracking susceptibility of the laser-clad layers were studied in terms of carbon additions. Results show that the small change of the carbon content in the alloy powders can obviously change the microstructure and properties of the layers. When the carbon content is in the range of 0.3–0.4 wt.%, the decrease of the carbon content in alloy powders will increase the hardness and toughness of the layers simultaneously under the same process parameters. As a result, crack-free coatings with high hardness can be obtained. As the carbon content increases from 0.2 wt.% to 0.4 wt.%, the segregation ratio of chromium increases, while the segregation ratios of nickel, manganese, and silicon first decrease and then increase. At the same time, a new designing principle concerning the composition and microstructure has been put forward, and the principal mechanisms of strengthening and toughening of the layers are fine-grain strengthening and low carbon martensitic phase transformation strengthening.     

分布式协作工作流技术研究

工作流是实现企业业务过程建模、优化、管理、集成和自动化的核心技术．作为分布式的应用平台，工作流管理系统任务处理能力即吞吐能力是一个重要的性能指标．目前，已有的工作流管理系统在这方面存在较大的不足，成为工作流管理系统广泛应用的严重障碍．本文研究了工作流系统的协作方式和负载平衡技术，定义了工作流系统的负载因子，给出了一个分布式协作工作流系统模型，并结合业务流程逻辑，提出了分布式协作工作流系统负载平衡调度算法．实验表明该分布式协作工作流系统有效地扩展了单个工作流系统的吞吐能力。     

Improved domino logic for high speed design

Techniques are introduced to improve the speed of domino logic. With an inverted clock scheme, a serial transistor is removed and capacitances at the output node are reduced in the new structures. HSPICE simulation shows that over 20% performance enhancement is achieved.     

Strong visible PL from the nc-Si thin film by Ni silicide mediated crystallization

We studied the growth of nanocrystalline silicon (nc-Si) thin film exhibiting a strong room temperature photoluminescence (PL) at 1.81–2.003 eV. The amorphous silicon was crystallized by Ni silicide mediated crystallization (Ni SMC) and then Secco-etched to exhibit the PL. The PL peak energy and intensity increase with increasing the metal density on the a-Si because of the reduction in the grain size down to 2 nm. The photoluminescence energy and peak intensity depend strongly on the Secco etch time because the grain size is reduced by etching the grain boundaries.