A new ent-clerodane diterpene from the aerial parts of Baccharis gaudichaudiana

A new ent-clerodane diterpene, named bacchariol (1) was isolated from the aerial parts of Baccharis gaudichaudiana DC. (Compositae), together with known ent-clerodane diterpenes (2, 3), eight known flavonoids (4-11) and 3, 5-dicaffeoylquinic acid (12). Their structures were determined by spectroscopic analyses. Flavonoids (7, 8, 11) and 12 showed moderate scavenging activities toward 1, 1-diphenyl-2-picrylhydrazyl (DPPH) radicals.     

Reconstruction of conductivity and current density images using only one component of magnetic field measurements

Magnetic resonance current density imaging (MRCDI) is to provide current density images of a subject using a magnetic resonance imaging (MRI) scanner with a current injection apparatus. The injection current generates a magnetic field that we can measure from MR phase images. We obtain internal current density images from the measured magnetic flux densities via Ampere's law. However, we must rotate the subject to acquire all of the three components of the induced magnetic flux density. This subject rotation is impractical in clinical MRI scanners when the subject is a human body. In this paper, we propose a way to eliminate the requirement of subject rotation by careful mathematical analysis of the MRCDI problem. In our new MRCDI technique, we need to measure only one component of the induced magnetic flux density and reconstruct both cross-sectional conductivity and current density images without any subject rotation.     

Estimation of anomaly location and size using electrical impedance tomography

We developed a new algorithm that estimates locations and sizes of anomalies in electrically conducting medium based on electrical impedance tomography (EIT) technique. When only the boundary current and voltage measurements are available, it is not practically feasible to reconstruct accurate high-resolution cross-sectional conductivity or resistivity images of a subject. In this paper, we focus our attention on the estimation of locations and sizes of anomalies with different conductivity values compared with the background tissues. We showed the performance of the algorithm from experimental results using a 32-channel EIT system and saline phantom. With about 1.73% measurement error in boundary current-voltage data, we found that the minimal size (area) of the detectable anomaly is about 0.72% of the size (area) of the phantom. Potential applications include the monitoring of impedance related physiological events and bubble detection in two-phase flow. Since this new algorithm requires neither any forward solver nor time-consuming minimization process, it is fast enough for various real-time applications in medicine and nondestructive testing.     

A 2.4-GHz Low-Power Low-IF Receiver and Direct-Conversion Transmitter in 0.18-μm CMOS for IEEE 802.15.4 WPAN Applications

In this paper, a low-power low-IF receiver and a direct-conversion transmitter (DCT) suitable for the IEEE standard 802.15.4 radio system at the 2.4-GHz band are presented in 0.18-mum deep n-well CMOS technology. By using vertical NPN (V-NPN) bipolar junction transistors in the baseband analog circuits of the low-IF receiver, the image rejection performance is improved and the power consumption is reduced. In addition, by applying the V-NPN current mirrored technique in a DCT, the carrier leakage is reduced and the linearity performance is improved. The receiver has 10 dB of noise figure, -15 dBm of third-order input intercept point, and 35 dBc of image rejection. The transmitter has more than -2 dBm of transmit output power, -35 dBc of local oscillator leakage, and -46 dBc of the transmit third harmonic component. The receiver and transmitter dissipate 6 and 9 mA from a 1.8-V supply, respectively     

Optimal Transmission Power for Single- and Multi-Hop Links in Wireless Packet Networks With ARQ Capability

In this paper, we rigorously investigate the energy minimization problem for wireless packet networks with automatic repeat request (ARQ) capability. We first formulate the problem for the single-hop case under constrained packet delay and reliability and derive the necessary and sufficient condition for the optimal transmission power at each ARQ stage. We formulate a global rule of optimal transmission power control that achieves optimality regardless of the delay and reliability constraints. Then we extend it to encompass the multi-hop case by dividing the overall problem into two subproblems-energy determination for each ARQ stage and energy distribution among the constituent nodes. We show that the optimality condition established for the single-hop case is also applicable to solve the energy determination problem in the multi-hop case, rendering an optimal solution to the energy distribution problem. Numerical examples reveal that a significant amount of energy is saved by adopting the optimal transmission power and the performance gain is strongly correlated with the decreasing property of the frame error rate     

Optimized Hash Tree for Authentication in Sensor Networks

Authentication based on the Merkle tree has been proposed as an energy efficient approach in a resource constrained sensor network environment. It replaces complicated certificate verification with more power efficient hash computations. While previous works assumed complete binary Merkle tree structures, which can be used efficiently only in sensor networks with a specific number of sensor nodes, we investigate incomplete Merkle trees to support any number of sensors. For the incomplete Merkle tree, we demonstrate that an optimal structure can be found through mathematical analysis and simulation. A novel tree indexing scheme is also proposed to reduce communication overhead and save sensors resources during authentication     

Double-pass resonant Er-Raman amplifier

A new double-pass wideband Er-Raman fibre amplifier is proposed, pumped by a Raman laser oscillating through a medium consisting of Er-doped fibre and dispersion compensating fibre in series.     

Development of a miniature double-pass cylindrical mirror electron energy analyzer (DPCMA), and its application to Auger photoelectron coincidence spectroscopy (APECS)

We have developed a miniature double-pass cylindrical mirror electron energy analyzer (DPCMA) with an outer diameter of 26 mm. The DPCMA consists of a shield for the electric field, inner and outer cylinders, two pinholes with a diameter of 2.0 mm, and an electron multiplier. By assembling the DPCMA in a coaxially symmetric mirror electron energy analyzer (ASMA) coaxially and confocally we developed an analyzer for Auger photoelectron coincidence spectroscopy (APECS). The performance was estimated by measuring the Si-LVV-Auger Si-1s-photoelectron coincidence spectra of clean Si(1 1 1). The electron-energy resolution of the DPCMA was estimated to be E/ΔE = 20. This value is better than that of the miniature single-pass CMA (E/ΔE = 12) that was used in the previous APECS analyzer.     

Atomic structure of the Si(5 5 12)-2 × 1 surface

Based on the results of scanning tunneling microscopy studies of the reconstructed Si(5 5 12)-2 × 1 surface, its atomic structure has been found. It turns out that Si(5 5 12)-2 × 1 consists of four one-dimensional structures: honeycomb (H) chain, π-bonded H′ (π) chain, dimer-adatom (D/A) row, and tetramer (T) row. Its period is composed of three subunits, i.e., (i) (3 3 7) unit with a D/A row [D(3 3 7)], (ii) (3 3 7) unit with a T row [T(3 3 7)], and (iii) (2 2 5) unit with both a D/A and a T row. Two kinds of adjacent subunits, T(3 3 7)/D(3 3 7) and D(3 3 7)/(2 2 5), are divided by H chains with 2× periodicity due to buckling, while one kind of adjacent subunits, T(3 3 7)/(2 2 5), is divided by a π chain with 1× periodicity. Two chain structures, H and π chains, commute with each other depending upon the external stresses perpendicular to the chain, which is the same for two row structures, D/A and T rows. It can be concluded that the wide and planar reconstruction of Si(5 5 12)-2 × 1 is originates from the stress balance among two commutable chains and two commutable rows.     

1.6 μm band double pass fiber Raman amplifiers using Raman fiber oscillator

We propose double pass fiber Raman amplifier schemes based on Raman fiber oscillator in order to amplify optical signal with wavelengths from 1610 to 1650 nm efficiently. We experimentally demonstrate that the proposed double pass amplifier scheme has enhanced gain characteristics compared to a conventional single pass scheme. We also demonstrate a scheme for the proposed double pass amplifier to have small gain variation over the wavelength range by using two fiber Bragg gratings with different center wavelengths.