Optoelectronic charge coupled device (OECCD) using InP MIScapacitor array

An optoelectronic charge coupled device (OECCD) which is directly compatible with an incident optical signal is proposed. The nonlinear partial differential equation consisting of optical generation and recombination is solved in one dimension using the Crank-Nicolson finite-difference scheme. The charge transfer inefficiency is the main parameter considered for the calculation     

Adaptive inverse filters for stereophonic sound reproduction

A general theoretical basis for the design of adaptive digital filters used for the equalization of the response of multichannel sound reproduction systems is described. The approach is applied to the two-channel case and then extended to deal with arbitrary numbers of channels. The intention is to equalize not only the response of the loudspeakers and the listening room but also the crosstalk transmission from right loudspeaker to left ear and vice versa. The formulation is a generalization of the Atal-Schroeder crosstalk canceler. However, the use of a least-squares approach to the digital filter design and of appropriate modeling delays potentially allows the effective equalization of nonminimum phase components in the transmission path. A stochastic gradient algorithm which facilitates the adaptation of the digital filters to the optimal solution, thereby providing the possibility of designing the filters in situ, is presented. Some experimental results for the two-channel case are given     

The Effect of Polymer Optoelectronic Properties on the Performance of Multilayer Hybrid Polymer/TiO2 Solar Cells

We report a study of the effects of polymer optoelectronic properties on the performance of photovoltaic devices consisting of nanocrystalline TiO₂ and a conjugated polymer. Three different poly(2‐methoxy‐5‐(2′‐ethylhexoxy)‐1,4‐phenylenevinylene) (MEH‐PPV)‐based polymers and a fluorene–bithiophene copolymer are compared. We use photoluminescence quenching, time‐of‐flight mobility measurements, and optical spectroscopy to characterize the exciton‐transport, charge‐transport, and light‐harvesting properties, respectively, of the polymers, and correlate these material properties with photovoltaic‐device performance. We find that photocurrent is primarily limited by the photogeneration rate and by the quality of the interfaces, rather than by hole transport in the polymer. We have also studied the photovoltaic performance of these TiO₂/polymer devices as a function of the fabrication route and device design. Including a dip‐coating step before spin‐coating the polymer leads to excellent polymer penetration into highly structured TiO₂ networks, as was confirmed through transient optical measurements of the photoinduced charge‐transfer yield and recombination kinetics. Device performance is further improved for all material combinations studied, by introducing a layer of poly(ethylene dioxythiophene) (PEDOT) doped with poly(styrene sulfonic acid) (PSS) under the top contact. Optimized devices incorporating the additional dip‐coated and PEDOT:PSS layers produced a short‐circuit current density of about 1 mA cm^–2, a fill factor of 0.50, and an open‐circuit voltage of 0.86 V under simulated AM 1.5 illumination (100 mW cm^–2, 1 sun). The corresponding power conversion efficiency under 1 sun was ≥ 0.4 %.     

论网络升级方式与光纤选择的关系

在重点说明影响传输光纤设计的主要问题的同时，简要介绍了各种升级方式所面临的主要技术挑战，并详细说明这些挑战对传输光纤提出的技术要求。     

Using a Conic Formulation for Finding Steiner Minimal Trees

We present a new mathematical programming formulation for the Steiner minimal tree problem. We relax the integrality constraints on this formulation and transform the resulting problem (which is convex, but not everywhere differentiable) into a standard convex programming problem in conic form. We consider an efficient computation of an ε-optimal solution for this latter problem using an interior-point algorithm.     

A comparative study of human skin thermal response to sapphirecontact and cryogen spray cooling

Surface cooling, in conjunction with various thermally mediated therapeutic procedures, can provide a means to protect superficial tissues from injury while achieving destruction of deeper targeted structures. We have investigated the thermal response of in-vivo human skin to: (1) contact cooling with a sapphire window (6-12°C); and (2) spray cooling with a freon substitute cryogen [tetrafluoroethane; boiling point ≈-26°C at 1 atmospheric pressure (atm)]. Measurements utilizing infrared radiometry show surface temperature reductions from 30°C to 14-19°C are obtained within approximately is in response to sapphire contact cooling. Surface temperature reductions to values between 5°C and -9°C are obtained in response to 20-100-ms cryogen spurts. Computational results, based on fitting the measured radiometric surface temperature to estimate heat transfer parameters, show: (1) temperature reductions remain localized to approximately 200 μm of superficial tissue; and (2) values of heat flux and total energy removed per unit skin surface area at least doubled when using cryogen spray cooling     

High-transconductance n-type Si/SiGe modulation-doped field-effecttransistors

The authors report on the fabrication and the resultant device characteristics of the first 0.25-μm gate-length field-effect transistor based on n-type modulation-doped Si/SiGe. Prepared using ultrahigh vacuum/chemical vapor deposition (UHV/CVD), the mobility and electron sheet charge density in the strained Si channel are 1500 (9500) cm²/V-s and 2.5×10¹² (1.5×10¹² ) cm^-2 at 300 K (77 K). At 77 K, the devices have a current and transconductance of 325 mA/mm and 600 mS/mm, respectively. These values far exceed those found in Si MESFETs and are comparable to the best results achieved in GaAs/AlGaAs modulation-doped transistors