Prenylated Flavonoid Glycosides with PCSK9 mRNA Expression Inhibitory Activity from the Aerial Parts of Epimedium koreanum

Phytochemical investigation on the n-BuOH-soluble fraction of the aerial parts of Epimedium koreanum using the PCSK9 mRNA monitoring assay led to the identification of four previously undescribed acylated flavonoid glycosides and 18 known compounds. The structures of new compounds were elucidated by NMR, MS, and other chemical methods. All isolated compounds were tested for their inhibitory activity against PCSK9 mRNA expression in HepG2 cells. Of the isolates, compounds 6, 7, 10, 15, and 17–22 were found to significantly inhibit PCSK9 mRNA expression. In particular, compound 7 was shown to increase LDLR mRNA expression. Thus, compound 7 may potentially increase LDL uptake and lower cholesterol levels in the blood.     

Chemical Composition of a Novel Distillate from Fermented Mixture of Nine Anti-Inflammatory Herbs and Its UVB-Protective Efficacy in Mouse Dorsal Skin via Attenuating Collagen Disruption and Inflammation

Since ancient times, various herbs have been used in Asia, including Korea, China, and Japan, for wound healing and antiaging of the skin. In this study, we manufactured and chemically analyzed a novel distillate obtained from a fermented mixture of nine anti-inflammatory herbs (Angelica gigas, Lonicera japonica, Dictamnus dasycarpus Turcz., D. opposita Thunb., Ulmus davidiana var. japonica, Hordeum vulgare var. hexastichon Aschers., Xanthium strumarium L., Cnidium officinale, and Houttuynia cordata Thunb.). The fermentation of natural plants possesses beneficial effects in living systems. These activities are attributed to the chemical conversion of the parent plants to functional constituents which show more potent biological activities. In our current study, the distillate has been manufactured after fermenting the nine oriental medical plants with Lactobacillus fermentum, followed by distilling. We analyzed the chemical ingredients involved in the distillate and evaluated the effects of topical application of the distillate on ultraviolet B (UVB)-induced skin damage in Institute of Cancer Research (ICR) mice. Topical application of the distillate significantly ameliorated the macroscopic and microscopic morphology of the dorsal skin against photodamage induced by UVB radiation. Additionally, our current results showed that topical application of the distillate alleviated collagen disruption and reduced levels of proinflammatory cytokines (tumor necrosis factor alpha and interleukin 1 β expressions) in the dorsal skin against UVB radiation. Taken together, our current findings suggest that the distillate has a potential to be used as a material to develop a photoprotective adjuvant.     

Highly stable,frequency-controlled mode-locked erbium fiber laser comb

A mode-locked Er:fiber laser-based optical frequency comb with high stability in the repetition frequency and carrier-envelope offset (CEO) frequency is realized. The CEO beat signal was detected right after the supercontinuum generation by a compact single-beam f–2f self-referencing interferometer, which does not require further delay compensation. The stabilized repetition frequency has an out-of-loop tracking stability of 1.3×10^-13/ for an integration time τ less than 1000 s, which is limited by the stability of the frequency measurement system. The stabilized CEO frequency has a residual fluctuation of 0.52 mHz measured with a 1 s gate time. This is, to our knowledge, the highest tracking stability realized for fiber laser-based optical frequency comb. PACS 06.30.Ft; 42.60.Lh; 42.55.Wd     

Low C24‐OH and C22‐OH sulfatides in human renal cell carcinoma

Histopathologic diagnosis of renal cell carcinoma (RCC) may sometimes be difficult with small biopsy samples. We applied histology‐directed matrix‐assisted laser desorption/ionization mass spectrometry to RCC samples to evaluate whether and how lipid profiles are different between RCC and normal tissue. We evaluated 59 RCC samples and 24 adjacent normal tissue samples collected from patients who underwent surgery. Five peaks were significantly differently expressed (p < 10^?7) between RCCs and adjacent normal tissue samples. C24‐OH sulfatide (ST‐OH {18:1/24:0}[M‐H]^?; m/z 906.7 in the negative ion mode) and C22‐OH sulfatide (ST‐OH {18:1/22:0}[M‐H]^?; m/z 878.6 in the negative ion mode) were most significantly underexpressed in RCC samples, compared with adjacent normal tissue samples. With 100 random training‐to‐test partitions within these samples, the median prediction accuracy (RCC vs. normal) ranged from 96.3% to 100% at p cutoff values for feature selection ranging from 0.001 to 10^?7. Two oncocytoma samples were predicted as normal tissue by five lipids that were differentially expressed between RCC and normal tissue at p < 10^?7. Clear‐cell, papillary, and chromophobe RCCs were different in lipid profiles. Permutation p‐ values for 0.632+ bootstrap cross‐validated misclassification rates were less than 0.05 for all the classifiers. Thus, lipid profiles differentiate RCC from normal tissue and may possibly classify the histology of RCC. © 2014 The Authors. Journal of Mass Spectrometry published by John Wiley & Sons, Ltd.     

A rapid polyol combustion strategy towards scalable synthesis of nanostructured LiFePO4/C cathodes for Li-ion batteries

In the present study, carbon-coated lithium iron phosphate (LiFePO₄/C) is prepared directly by a polyol-assisted pyro-synthesis performed under reaction times of a few seconds in open-air conditions. The polyol solvent, tetraethylene glycol (TTEG), acts as a low-cost fuel to facilitate combustion and the released exothermic energy promotes the nucleation and growth processes of the olivine nanoparticles. In addition, phosphoric acid (used as the phosphorous source) acts as a catalyst to accelerate polyol carbonization. The structure analysis of the as-prepared LiFePO₄/C using X-ray, neutron diffraction and ⁷Li NMR studies suggested the efficacy of the rapid technique to produce highly crystalline phase-pure olivine nanocrystals. The electron microscopy and particle-size distribution studies revealed that the average particle diameters lie below 100 nm and confirmed the presence of a surface carbon layer of 2–3 nm thickness. The thermal and elemental studies indicated that the carbon content in the sample was approximately 5 %. The prepared LiFePO₄/C cathode delivered capacities of 162 mA h g^-1 at 0.1 °C rates with impressive capacity retention for extended cycling. The polyol-assisted pyro-synthesis, which evades the use of external energy sources, is not only a straightforward, simple and timely approach but also offers opportunities for large-scale LiFePO₄/C production.     

Diffusion mechanism of CO2 in 13X zeolite beads

A systematic study of the diffusion mechanism of CO₂ in commercial 13X zeolite beads is presented. In order to gain a complete understanding of the diffusion process of CO₂, kinetic measurements with a zero length column (ZLC) system and a volumetric apparatus have been carried out. The ZLC experiments were carried out on a single bead of zeolite 13X at 38 °C at a partial pressure of CO₂ of 0.1 bar, conditions representative of post-combustion capture. Experiments with different carrier gases clearly show that the diffusion process is controlled by the transport inside the macropores. Volumetric measurements using a Quantachrome Autosorb system were carried out at different concentrations. These experiments are without a carrier gas and the low pressure measurements show clearly Knudsen diffusion control in both the uptake cell and the bead macropores. At increasing CO₂ concentrations the transport mechanism shifts from Knudsen diffusion in the macropores to a completely heat limited process. Both sets of experiments are consistent with independent measurements of bead void fraction and tortuosity and confirm that under the range of conditions that are typical of a carbon capture process the system is controlled by macropore diffusion mechanisms.     

Highly Mesoporous Metal‐Organic Frameworks as Synergistic Multimodal Catalytic Platforms for Divergent Cascade Reactions

Rational engineering and assimilation of diverse chemo‐ and biocatalytic functionalities in a single nanostructure is highly desired for efficient multistep chemical reactions but has so far remained elusive. Here, we design and synthesize multimodal catalytic nanoreactors (MCNRs) based on a mesoporous metal‐organic framework (MOF). The MCNRs consist of customizable metal nanocrystals and stably anchored enzymes in the mesopores, as well as coordinatively unsaturated cationic metal MOF nodes, all within a single nanoreactor space. The highly intimate and diverse catalytic mesoporous microenvironments and facile accessibility to the active site in the MCNR enables the cooperative and synergistic participation from different chemo‐ and biocatalytic components. This was shown by one‐pot multistep cascade reactions involving a heterogeneous catalytic nitroaldol reaction followed by a [Pd/lipase]‐catalyzed chemoenzymatic dynamic kinetic resolution to yield optically pure (>99 % ee) nitroalcohol derivatives in quantitative yields.     

γ‐Glutamylcysteine‐ and Cysteinylglycine‐Directed Growth of Chiral Gold Nanoparticles and their Crystallographic Analysis

Chiral optical metamaterials with delicate structures are in high demand in various fields because of their strong light–matter interactions. Recently, a scalable strategy for the synthesis of chiral plasmonic nanoparticles (NPs) using amino acids and peptides has been reported. Reported herein, 3D chiral gold NPs were synthesized using dipeptide γ‐Glu‐Cys and Cys‐Gly and analyzed crystallographically. The γ‐Glu‐Cys‐directed NPs present a cube‐like outline with a protruding chiral wing. In comparison, the NPs synthesized with Cys‐Gly exhibited a rhombic dodecahedron‐like outline with curved edges and elliptical cavities on each face. Morphology analysis of intermediates indicated that γ‐Glu‐Cys generated an intermediate concave hexoctahedron morphology, while Cys‐Gly formed a concave rhombic dodecahedron. NPs synthesized with Cys‐Gly are named 432 helicoid V because of their unique morphology and growth pathway.     

Simultaneous separation and determination of 20 potential adulterant antigout and antiosteoporosis pharmaceutical compounds in herbal food products using LC with electrospray ionization MS/MS and LC with quadrupole‐time‐of‐flight MS

An analytical method for the simultaneous and reliable determination of 20 antigout and antiosteoporosis pharmaceutical compounds in adulterated health food products was developed using liquid chromatography with electrospray ionization tandem mass spectrometry and liquid chromatography with quadrupole‐time‐of‐flight mass spectrometry. The method was validated through the determination of specificity, linearity, limit of detection, and limit of quantification, method detection limit, method quantitation limit, precision, accuracy, recovery, and stability. The matrix effect was also determined. The validation results of the developed method are as follows: for solid and liquid blank samples, limits of detection ranged from 0.05 to 5.00 ng/mL and limits of quantification ranged from 0.15 to 15.00 ng/mL. Linearity was acceptable, and the correlation coefficients (R²) were ≥0.99 for all target compounds. Both intra and interday precision were less than 9.16% RSD, and accuracies ranged from 95.31 to 116.68%. Mean recoveries for different types of dietary supplements classified as powders, liquids, tablets, and capsules were found to be 80.81 to 117.62% with less than 15.00% relative standard deviation. The stability of the standard mixture solution was less than 11.72% relative standard deviation after 48 h. By the proposed method, the presence of dexamethasone was determined in seized herbal food products at concentrations that ranged from 126 to 215 µg/g.     

Miscibility of poly(ethylene terephthalate)/poly(ethylene 2,6-naphthalate) blends by transesterification

The effects of transesterification on the miscibility of poly(ethylene terephthalate)/poly(ethylene 2,6-naphthalate) were studied. Blends were obtained by solution precipitation at room temperature to avoid transesterification during blend preparation. The physical blends and transesterified products were analyzed by wide-angle x-ray scattering, differential scanning calorimetry, and nuclear magnetic resonance spectroscopy. It was found that the physical blends are immiscible and when the extent of transesterification reaches 50% of the completely randomized state, independent of blend composition, the blends are not crystallizable and show a single glass transition temperature between those of starting polymers. The interchange reactions were significantly influenced by annealing temperature and time but negligibly by blend composition. © 1996 John Wiley & Sons, Inc.