Development of an efficient protein phosphatase-based colorimetric test for okadaic acid detection

Okadaic acid (OA), responsible for gastrointestinal problems, inhibits protein phosphatase 2A (PP2A). Therefore, the inhibition exerted by the toxin on PP2A could be used to detect the presence of OA in aqueous solution and in shellfish sample.In this work, two commercial PP2As (from ZEU Immunotec and Millipore) and one produced by molecular engineering (from GTP Technology) were tested. Enzymes were used in solution and also immobilized within a polymeric gel. In solution, best performances were obtained using PP2A purchased from ZEU Immunotec (Spain). OA was detected in aqueous solution in concentration as low as 0.0124 μg L⁻¹ using the enzyme from ZEU Immunotec whereas the detection limits were 0.47 μg L⁻¹ and 0.123 μg L⁻¹ with PP2As from Millipore and GTP Technology, respectively. Considering that the immobilization step contributes to stabilize the PP2A activity, enzymes were entrapped within a photopolymer and an agarose gel. These different polymeric matrices were optimized, tested and compared. Agarose gel seems to be a good alternative to the photopolymer largely used in our group. For instance, the IC₅₀ value obtained with the test based on PP2A from ZEU Immunotec immobilized within an agarose gel was 1.98 μg L⁻¹. This value was 1.8-fold lower than those obtained with the photopolymer test using the same enzyme. The proposed test is sensitive, fast and does not require expensive equipment. To evaluate the efficiency of the assay, PP inhibition tests based on PP2A from ZEU Immunotec in solution or immobilized within a gel were used for OA detection in contaminated shellfish.     

Gene delivery with polycationic fullerene hexakis-adducts

Polyplexes prepared from DNA and globular compact polycationic derivatives constructed around a fullerene hexakis-adduct core have shown remarkable gene delivery capabilities.     

Crystal structure and photochemical behavior in solution of the 3'-N-sulfamate analogue of thymidylyl(3'-5')thymidine

The 3'-N-sulfamate analogue of thymidylyl(3'-5')thymidine (TnsoT, 1) exhibits a preference for a C3'-endo conformation in the solution and solid states. Its photochemical behavior in solution is compared to that of its natural counterpart, thymidylyl(3'-5')thymidine (TpT, 2), to get further insight into the significance of the C3'-endo conformation on the photoproduct formation at the single-stranded dinucleotide level. Irradiation at 254 nm of 1 led to the same type of photoproducts as observed with 2. However, 1 was significantly more photoreactive than 2, and accordingly, the initial rate of photoproduct formation was enhanced in accordance with its propensity to base stack compared to 2. The corresponding quantum yields were determined and showed that the enhancement factor (1 compared to 2) is moderate for the cyclobutane pyrimidine dimer (CPD) (1.26) and much higher for the (6-4) photoproduct (1.8). These data strongly suggest that the CPD and (6-4) photoproduct arise from distinct minor stacked conformations.     

Influence of the anisotropic polarizability on the anomalous dielectric relaxation spectra

The nonlinear dielectric response due to the application of a strong dc bias electric field superimposed on a weak ac electric field is considered in the context of the anomalous diffusion (subdiffusion). A perturbation procedure is used to derive analytical expressions for the first three harmonic components of the electric polarization of an assembly of both polar and anisotropically polarizable symmetric-top molecules. To accomplish that, an infinite hierarchy of multiterm (21) differential-recurrence equations of noninteger order for the moments is established and solved for the stationary regime. The results so obtained are illustrated in the form of Argand diagrams and three-dimensional relaxation spectra for the complex nonlinear dielectric increment extracted from the first harmonic component of the electric susceptibility. These plots show the role and importance played by the fractional exponent and the parameter P measuring the influence of the dipole moment over the permanent one.     

Determination of added sulfites in dried garlic with a modified version of the optimized Monier-Williams method

The optimized Monier-Williams method is slightly modified so that it could be applied for determining sulfite content in dried garlic. Dried garlic sample is directly acidified in a reactor at a pH below 3. At this pH level, the alliinase enzyme activity is irreversibly blocked, and the sulfur-containing amino acids such as alliin (the most abundant) present in dried garlic cannot be transformed into corresponding thiosulfinates such as allicin, which is absent in dried garlic. This prevents allicin from reacting with added sulfites and being probably converted to S-allyl thiosulfate, which is not volatile and has no taste. It is found that at a pH below 2.4 and at boiling water temperature, allicin produces sulfur dioxide in adequate quantity to explain the false-positive results when utilizing the optimized Monier-Williams method with allicin suppression for unsulfited dried garlic samples. Finally, when garlic samples are stabilized in a phosphoric acid buffer at a final pH around 2.4, no sulfite is produced during the Monier-Williams distillation, which is further proof there are no naturally occurring sulfites in unsulfited dried garlic under these mild conditions.     

Synthesis of zirconia monoliths for chromatographic separations

The aim of this work is to join the advantages of two different kinds of stationary phases: monolithic columns and zirconia-based supports. On the one hand, silica monolithic columns allow a higher efficiency with a lower back-pressure than traditional packed columns. On the other hand, chromatographic stationary phases based on zirconia have a higher thermal and chemical stability and specific surface properties. Combining these advantages, a zirconia monolith with a macroporous framework could be a real improvement in separation sciences. Two main strategies can be used in order to obtain a zirconia surface on a monolithic skeleton: coating or direct synthesis. The coverage by a zirconia layer of the surface of a silica-based monolith can be performed using the chemical properties of the silanol surface groups. We realized this coverage using zirconium alkoxide and we further grafted n-dodecyl groups using phosphate derivatives. Any loss of efficiency was observed and fast separations have been achieved. The main advance reported in this paper is related to the preparation of zirconia monoliths by a sol-gel process starting from zirconium alkoxide. The synthesis parameters (hydrolysis ratio, porogen type, precursor concentration, drying step, etc.) were defined in order to produce a macroporous zirconia monoliths usable in separation techniques. We produced various homogeneous structures: zirconia rod 2 cm long with a diameter of 2.3 mm, and zirconia monolith inside fused silica capillaries with a 75 microm I.D. These monoliths have a skeleton size of 2 microm and have an average through pore size of 6 microm. Several separations have been reported.     

Substituted thiazolamide coupled to a redox delivery system: a new gamma-secretase inhibitor with enhanced pharmacokinetic profile

Inhibition of gamma-secretase, one of the enzymes responsible for the cleavage of the amyloid precursor protein (APP) to produce pathogenic A beta peptides, is an attractive approach for the treatment of Alzheimer's disease. We have designed a new gamma-secretase thiazolamide inhibitor bearing a dihydronicotinoyl moiety as Redox Delivery System which allows specific delivery of the drug to the brain. Through, on the one hand, A beta peptide production measurements by specific in vitro assays (gamma-secretase Cell Free assay and Cell Based assay on HEK 293 APP transfected cells) and, on the other hand, pharmacokinetic studies on animal models, the new inhibitor shows a good pharmacokinetic profile as well as a potent gamma-secretase inhibitory activity in vitro. From the obtained results, it is expected that drug will be mainly delivered to the CNS with low diffusion in the peripheral tissues. Consequently the side effects of this gamma-secretase inhibitor on the immune cells could be reduced.     

Assignment of the EPR spectrum of 5,5-dimethyl-1-pyrroline N-oxide (DMPO) superoxide spin adduct

[structure: see text] Spin trapping consists of using a nitrone or a nitroso compound to "trap" an unstable free radical as a long-lived nitroxide that can be characterized by electron paramagnetic resonance (EPR) spectroscopy. The formation of DMPO-OOH, the spin adduct resulting from trapping superoxide (O(2)(*)(-)) with 5,5-dimethyl-1-pyrroline N-oxide (DMPO), has been exploited to detect the generation of superoxide in a wide variety of biological and chemical systems. The 12-line EPR spectrum of DMPO-OOH has been either reported or mentioned in more than a thousand papers. It has been interpreted as resulting from the following couplings: A(N) approximately 1.42 mT, A(H)beta approximately 1.134 mT, and A(H)gamma(1H) approximately 0.125 mT. However, the DMPO-OOH EPR spectrum has an asymmetry that cannot be reproduced when the spectrum is calculated considering a single species. Recently, it was proposed that the 0.125 mT splitting was misassigned and actually results from the superimposition of two individual EPR spectra associated with different conformers of DMPO-OOH. We have prepared 5,5-dimethyl-[3,3-(2)H(2)]-1-pyrroline N-oxide (DMPO-d(2)), and we showed that the EPR spectrum of the corresponding superoxide spin adduct is composed of only six lines, in agreement with the assignment of the 0.125 mT splitting to a gamma-splitting from a hydrogen atom bonded to carbon 3 of DMPO. This result was supported by DFT calculations including water solvation, and the asymmetry of the DMPO-OOH EPR spectrum was nicely reproduced assuming a chemical exchange between two conformers.