Bioconvection Due to Gyrotactic Microorganisms in Couple Stress Hybrid Nanofluid Laminar Mixed Convection Incompressible Flow with Magnetic Nanoparticles and Chemical Reaction as Carrier for Targeted Drug Delivery through Porous Stretching Sheet

In this paper, the steady electrically conducting hybrid nanofluid (CuO-Cu/blood) laminar-mixed convection incompressible flow at the stagnation-point with viscous and gyrotactic microorganisms is considered. Additionally, hybrid nanofluid flow over a horizontal porous stretching sheet along with an induced magnetic field and external magnetic field effects that can be used in biomedical fields, such as in drug delivery and the flow dynamics of the microcirculatory system. This investigation can also deliver a perfect view about the mass and heat transfer behavior of blood flow in a circulatory system and various hyperthermia treatments such as the treatment of cancer. The simple partial differential equations (PDEs) are converted into a series of dimensional ordinary differential equations (ODEs), which are determined using appropriate similarities variables (HAM). The influence of the suction or injection parameter, mixed convection, Prandtl number, buoyancy ratio parameter, permeability parameter, magnetic parameter, reciprocal magnetic prandtl number, bioconvection Rayleigh number, coupled stress parameter, thermophoretic parameter, Schmidt number, inertial parameter, heat source parameter, and Brownian motion parameter on the concentration, motile microorganisms, velocity, and temperature is outlined, and we study the physical importance of the present problem graphically.     

A note on coinduction functors between categories of comodules for corings

In this note we consider different versions of coinduction functors between categories of comodules for corings induced by a morphism of corings. In particular we introduce a new version of the coinduction functor in the case oflocally projective corings as a composition of suitable “Trace” and “Hom” functors and show how to derive it from a moregeneral coinduction functor between categories of type σ[M]. In special cases (e.g. the corings morphism is part of a morphism of measuringa-pairings or the corings have the same base ring), a version of our functor is shown to be isomorphic to the usual coinduction functor obtained by means of the cotensor product. Our results in this note generalize previous results of the author on coinduction functors between categories of comodules for coalgebras over commutative base rings.     

Synthesis of electro‐active membranes by chemical vapor deposition (CVD) process

In the past two decades, many research is being carried out on coating of textile membranes with conductive polymers. In order to functionalize the textile membranes, coating of different intrinsically conductive polymers can be applied on these membranes through appropriate coating techniques like electrochemical polymerization, wet chemical oxidation and chemical vapor deposition (CVD). Noticeably, CVD process is one of the most suitable and environment friendly technique. In this research, microporous polyester and polytetrafluoroethylene (PTFE) membranes were coated with conductive poly(3,4‐ethylenedioxythiophene) (PEDOT) by CVD process in the presence of ferric(III)chloride (FeCl₃) used as an oxidant. Polymerization of PEDOT on the surface of membranes and pore size was examined by optical microscope and scanning electron microscopy (SEM). Structural analysis investigated with ATR‐FTIR, which revealed the successful deposition of PEDOT on membranes without damaging their parent structures. The amount of PEDOT in PEDOT‐coated polyester and PTFE membranes was explored with the help of thermogravimeteric analysis. Electrical resistance values of PEDOT‐coated membranes were measured by two probe method. The effect of different electrolyte solutions such as, distilled H₂O, Na₂SO₄, HCl, and H₂SO₄ on electrical properties of produced conductive membranes was investigated after dipping for certain period of time. It was found that membranes dipped in H₂SO₄ show very low electrical resistance values, i.e. 0.85 kΩ for polyester membrane and 1.17 kΩ for PTFE membrane. The obtained PEDOT‐coated electro‐active membranes may find their possible utility in fuel cells, enzymatic fuel cells, and antistatic air filter applications. Copyright © 2014 John Wiley & Sons, Ltd.     

Simulation of the temperature and wear behaviour of a disc brake

Aerosols are defined in the simplest form as a mixture of solid or liquid particles suspended in a gas [1]. Brake dust is an aerosol, generated as a result of erosion between brake disc and brake pad. The aerosols can cause visual disorder, heart and lung diseases, short term acute symptoms like asthma, bronchitis and long term chronic irritation and inflammation of the respiratory track, which can lead to cancer. Therefore, it is important to know which factors are affecting the erosion rate of brakes. The main objective of this work is to measure the erosion rate of brake discs and brake pads, depending on temperature changes and deformation by performing experiments and simulations at varying velocities and load conditions. The general purpose, commercially available finite element solver Abaqus is used for performing the thermomechanically coupled simulations. Archad's Wear Law is used for the wear calculation. Experiments are conducted by using a pin on disc test bench. Temperature changes are measured by using thermocouples and erosion rates by measuring the total volume loss. At the end, relationships between erosion rates and temperature changes for different brake disc velocities and load conditions are investigated and experimental and simulation results are compared and discussed. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of laterally substituted bis(alkoxybenzoyloxy)hydroquinones

A new series of laterally substituted bis(alkoxybenzoyloxy)hydroquinone compounds has been synthesized and their mesomorphic properties studied. A number of hydroquinone compounds were synthesized with terminal n-alkoxy chains ranging from n-butyloxy to n-decyloxy. Additionally, lateral substituents ranging from n-butyl to n-octyl were incorporated through esterification at the remaining unsubstituted phenolic oxygen atoms. By optimizing the combination of the end group and lateral moieties we were able to tailor the molecular structure to form different liquid crystalline phases.     

Fully Coprime Comodules and Fully Coprime Corings

Prime objects were defined as generalization of simple objects in the categories of rings (modules). In this paper we introduce and investigate what turns out to be a suitable generalization of simple corings (simple comodules), namely fully coprime corings (fully coprime comodules). Moreover, we consider several primeness notions in the category of comodules of a given coring and investigate their relations with the fully coprimeness and the simplicity of these comodules. These notions are applied then to study primeness and coprimeness properties of a given coring, considered as an object in its category of right (left) comodules. Supported by King Fahd University of Petroleum and Minerals, Research Project # INT/296.     

Combinatorial auctions

Combinatorial auctions are an important class of market mechanisms in which participants are allowed to bid on bundles of multiple heterogeneous items. In this paper, we discuss several complex issues that are encountered in the design of combinatorial auctions. These issues are related to the formulation of the winner determination problem, the expression of combined bids, the design of progressive combinatorial auctions that require less information revelation, and the need for decision support tools to help participants make profitable bidding decisions. For each issue, we survey the existing literature and propose avenues for further research. An earlier version of this paper appeared in 4OR 2, 1–33, 2004.     

A dual Zariski topology for modules

We introduce a dual Zariski topology on the spectrum of fully coprime R-submodules of a given duo module M over an associative (not necessarily commutative) ring R. This topology is defined in a way dual to that of defining the Zariski topology on the prime spectrum of R. We investigate this topology and clarify the interplay between the properties of this space and the algebraic properties of the module under consideration.     

Trace determination of lanthanum,cerium, and praseodymium based on adsorptive stripping voltammetry

A sensitive stripping procedure is described for quantifying lanthanum, cerium and praseodymium ions, based on the controlled adsorptive accumulation of the lanthanide/o- cresolphthalexon complex onto the static mercury drop electrode. The effect of various operational parameters on the stripping response is discussed. A 20-min accumulation period coupled with differential pulse measurement of the current resulting from the adsorbed complex permits quantitation down to the 1 × 10^?10 M level. For concentrations ranging from 2.5 × 10^?8 M to 2.5 × 10^?9 M, a 0.5- to 4-min accumulation period is sufficient. The relative standard deviation ar the 7 × 10^?8 M level ranges from 1 to 6%.     

All-optical regenerative technique for width-tunable ultra-wideband signal generation

We demonstrate all-optical generation of width-tunable mono-cycle pulses for ultra-wideband communication. It has been shown that the width of the mono-cycle pulses can be tuned dynamically by simply varying the power of the optical signal. We also investigate the regenerative property of the nonlinear medium-based technique for the generation of mono-cycle pulses. For the purpose of comparison, ultra-wideband mono-cycle pulses are also generated through the optical delay line-based technique. It has been demonstrated through numerical simulations that the nonlinear medium-based technique is highly resilient to amplified spontaneous emission noise that is induced over the optical signal. Furthermore, we have shown that the highly nonlinear fiber-based nonlinear medium performs better than the semiconductor optical amplifier-based medium. Bit error rate measurements are taken for different values of optical signal-to-noise ratios in order to elaborate our work.