Speciation Analysis of Cr(III) and Cr(VI) after Solid Phase Extraction Using Modified Magnetite Nanoparticles

A new solid phase extraction (SPE) method has been developed for the speciation of Cr(III) and Cr(VI). This method is based on the adsorption of Cr(VI) on modified alumina‐coated magnetite nanoparticles (ACMNPs). Total chromium in different samples was determined as Cr(VI) after oxidation of Cr(III) to Cr(VI) using H₂O₂. The chromium concentration has been determined by flame atomic absorption spectrometric (FAAS) technique and amount of Cr(III) was calculated by substracting the concentration of Cr(VI) from total chromium concentration. The effect of parameters such as pH, amount of adsorbent, contact time, sample volume, eluent type, H₂O₂ concentration and cetyltrimethylammonium bromide (CTAB) concentration as modifier on the quantitative recovery of Cr(VI) were investigated. Under the optimal experimental conditions, the preconcentration factor, detection limit, linear range and relative standard deviation (RSD) of Cr(VI) were 140 (for 350 mL of sample solution), 0.083 ng mL^?1, 0.1‐10.0 ng mL^?1 and 4.6% (for 5.0 ng mL^?1, n = 7), respectively. This method avoided the time‐consuming column‐passing process of loading large volume samples in traditional SPE through the rapid isolation of CTAB@ACMNPs with an adscititious magnet. The proposed method was successfully applied to the determination and speciation of chromium in different water and wastewater samples and suitable recoveries were obtained.     

Aromatization of Hantzsch 1,4-Dihydropyridines with Al(NO3)3·9H2O and/or Fe(NO3)3·9H2O in the Presence of Silica Sulfuric Acid Under Mild and Heterogeneous Conditions

A simple and convenient method for the aromatization of Hantzsch 1,4-dihydropyridines to the corresponding pyridines is achieved via combination of aluminum or ferric nitrates and silica sulfuric acid as environmentally friendly and novel oxidizing media. This oxidation was carried out in dichloromethane under heterogeneous conditions with good to excellent yields.     

Synthesis of 2‐Aryl‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐2,5‐dihydro‐1H‐pyrrole‐3‐carboxylates by the Reaction between Hydrazones,Acetylenedicarboxylates, and 1‐Aryl‐N,N′‐bis(arylmethylidene)methanediamines

An efficient approach for the preparation of functionalized 2‐aryl‐2,5‐dihydro‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐1H‐pyrroles is described. The four‐component reaction between aldehydes, NH₂NH₂?H₂O, dialkyl acetylenedicarboxylates, and 1‐aryl‐N,N′‐bis(arylmethylidene)methanediamines proceeds in EtOH under reflux in good‐to‐excellent yields (Scheme 1). The structures of 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS, and, in the case of 4f , by X‐ray crystallography). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Determination of lead (II) ion by highly selective and sensitive lead (II) membrane electrode based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl) methyliden)hydrazono)metyl)phenol

A PVC (poly vinyl chloride) membrane electrode for lead ion based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl)methyliden)hydrazono)metyl)phenol (HMHMP) as a membrane carrier was prepared. This electrode exhibited linear response with Nernstian slope of 29.2?±?0.2?mV per decade within the concentration range of 2.0?×?10^?7–1.0?×?10^?1?M lead ion. The limit of detection, as determined from the intersection of the extrapolated linear segments of the calibration plot, was 8.0?×?10^?8 M. The electrode exhibited high selectivity for Pb (II). The response time of the electrode was about 5–10?s for different concentrations. The electrode is suitable for use in aqueous solutions in a pH range of 5.0–7.5. It was used as an indicator electrode in a titration of Pb (II) with chromate at constant pH. This electrode was used for the determination of lead in ore samples, and the results were in agreement with those obtained with an atomic absorption spectroscopy (AAS) method. Also lead selective electrode was used for monitoring of lead in spiked samples of the Zayanderud River and waste water by the potentiometry technique.     

Conductometric study of complex formation between benzylbisthiosemicarbazone and metal cations in acetonitrile,dimethylformamide, and their binary mixtures

We report on conductometric study of complexation between benzylbisthiosemicarbazone [(2E,2′E)-2,2′-(1,2-diphenylethane-1,2-diylidene)bis(hydrazine-1-carbothioamide)] with Zn²⁺, Cr³⁺, Co²⁺, and Ni²⁺ cations at different temperatures in acetonitrile-dimethylformamide binary solvents of varied composition. The equilibrium constant and standard thermodynamic parameters (Δ_c H ⁰ and Δ_c S ⁰) of the complexes formation have been determined and found to be dependent on the binary solvent composition, the metal ion nature, and temperature.     

Multiple functions of microfluidic platforms: Characterization and applications in tissue engineering and diagnosis of cancer

Microfluidic system, or lab-on-a-chip, has grown explosively. This system has been used in research for the first time and then entered in the clinical section. Due to economic reasons, this technique has been used for screening of laboratory and clinical indices. The microfluidic system solves some difficulties accompanied by clinical and biological applications. In this review, the interpretation and analysis of some recent developments in microfluidic systems in biomedical applications with more emphasis on tissue engineering and cancer will be discussed. Moreover, we try to discuss the features and functions of microfluidic systems.     

Overcoming acid–base copolymer neutralization using mesoporous carbon and its catalytic activity in the tandem deacetalization–Knoevenagel condensation reaction

Research on Chemical Intermediates - Acid–base copolymer materials are of considerable interest because of their fundamental implications for acid–base bifunctional catalysis...     

Adaptive fuzzy voltage-based backstepping tracking control for uncertain robotic manipulators subject to partial state constraints and input delay

Nonlinear Dynamics - The aim of this paper is to tackle the problem of adaptive fuzzy voltage-based tracking control for uncertain electrically driven robotic manipulators subject to input delay...     

Electrocatalytic activity of porous nanostructured Fe/Pt-Fe electrode for methanol electrooxidation in alkaline media

An electrochemical approach to fabricate a nanostructured Fe/Pt-Fe catalyst through electrodepo-sition followed by galvanic replacement is presented. An Fe/Pt-Fe nanostructured electrode was prepared by deposition of Fe-Zn onto a Fe electrode surface, followed by replacement of the Zn by Pt at open-circuit potential in a Pt-containing alkaline solution. Scanning electron microscopy and energy-dispersive X-ray techniques reveal that the Fe/Pt-Fe electrode is porous and contains Pt. The electrocatalytic activity of the Fe/Pt-Fe electrode for oxidation of methanol was examined by cyclic voltammetry and chronoamperometry. The electrooxidation current on the Fe/Pt-Fe catalyst is much higher than that on flat Pt and smooth Fe catalysts. The onset potential and peak potential on the Fe/Pt-Fe catalyst are more negative than those on flat Pt and smooth Fe electrodes for methanol electrooxidation. All results show that this nanostructured Fe/Pt-Fe electrode is very attractive for integrated fuel cell applications in alkaline media.     

Simulation of conjugate radiation–forced convection heat transfer in a porous medium using the lattice Boltzmann method

In this paper, a lattice Boltzmann method is employed to simulate the conjugate radiation–forced convection heat transfer in a porous medium. The absorbing, emitting, and scattering phenomena are fully included in the model. The effects of different parameters of a silicon carbide porous medium including porosity, pore size, conduction–radiation ratio, extinction coefficient and kinematic viscosity ratio on the temperature and velocity distributions are investigated. The convergence times of modified and regular LBMs for this problem are 15 s and 94 s, respectively, indicating a considerable reduction in the solution time through using the modified LBM. Further, the thermal plume formed behind the porous cylinder elongates as the porosity and pore size increase. This result reveals that the thermal penetration of the porous cylinder increases with increasing the porosity and pore size. Finally, the mean temperature at the channel output increases by about 22% as the extinction coefficient of fluid increases in the range of 0–0.03.