Controlling the Microstructure of Conjugated Polymers in High‐Mobility Monolayer Transistors via the Dissolution Temperature

It remains a challenge to precisely tailor the morphology of polymer monolayers to control charge transport. Herein, the effect of the dissolution temperature (T_dis) is investigated as a powerful strategy for morphology control. Low T_dis values cause extended polymer aggregation in solution and induce larger nanofibrils in a monolayer network with more pronounced π–π stacking. The field‐effect mobility of the corresponding monolayer transistors is significantly enhanced by a factor of four compared to devices obtained from high T_dis with a value approaching 1 cm² V^?1 s^?1. Besides that, the solution kinetics reveal a higher growth rate of aggregates at low T_dis, and filtration experiments further confirm that the dependence of the fibril width in monolayers on T_dis is consistent with the aggregate size in solution. The generalizability of the T_dis effect on polymer aggregation is demonstrated using three other conjugated polymer systems. These results open new avenues for the precise control of polymer aggregation for high‐mobility monolayer transistors.     

Imaging the In Vivo Degradation of Tissue Engineering Implants by Use of Supramolecular Radiopaque Biomaterials

For in situ tissue engineering (TE) applications it is important that implant degradation proceeds in concord with neo‐tissue formation to avoid graft failure. It will therefore be valuable to have an imaging contrast agent (CA) available that can report on the degrading implant. For this purpose, a biodegradable radiopaque biomaterial is presented, modularly composed of a bisurea chain‐extended polycaprolactone (PCL2000‐U4U) elastomer and a novel iodinated bisurea‐modified CA additive (I‐U4U). Supramolecular hydrogen bonding interactions between the components ensure their intimate mixing. Porous implant TE‐grafts are prepared by simply electrospinning a solution containing PCL2000‐U4U and I‐U4U. Rats receive an aortic interposition graft, either composed of only PCL2000‐U4U (control) or of PCL2000‐U4U and I‐U4U (test). The grafts are explanted for analysis at three time points over a 1‐month period. Computed tomography imaging of the test group implants prior to explantation shows a decrease in iodide volume and density over time. Explant analysis also indicates scaffold degradation. (Immuno)histochemistry shows comparable cellular contents and a similar neo‐tissue formation process for test and control group, demonstrating that the CA does not have apparent adverse effects. A supramolecular approach to create solid radiopaque biomaterials can therefore be used to noninvasively monitor the biodegradation of synthetic implants.     

Pressure drop effects on selectivity and resolution in packed column supercritical fluid chromatography

The influence of pressure drop on retention, selectivity, plate height and resolution was investigated systematically in packed supercritical fluid chromatography (SFC) using pure carbon dioxide as the mobile phase. Numerical methods developed previously which enabled the prediction of pressure gradients, diffusivities, capacity factors, plate heights and resolutions along the length of the column were used for the model calculations. The effects of inlet pressure and supercritical fluid flow rate on selectivity and resolution are studied. In packed column SFC with pure carbon dioxide as the mobile phase, the pressure drop can have a significant effect on resolution. The flow rate is shown to have a larger effect than generally realized. The calculated data are shown to be in good agreement with the experimental results. Finally, the variation of the chromatographic parameters along a 5.5 meter long model SFC column is illustrated. The possibilities and limitations of using long packed columns in SFC are discussed. It is demonstrated that long columns with large plate numbers do not necessarily yield better separations.     

Salt Concentration Effects in Planar Light‐Emitting Electrochemical Cells

Incorporation of ions in the active layer of organic semiconductor devices may lead to attractive device properties like enhanced injection and improved carrier transport. In this paper, we investigate the effect of the salt concentration on the operation of light‐emitting electrochemical cells, using experiments and numerical calculations. The current density and light emission are shown to increase linearly with increasing ion concentration over a wide range of concentrations. The increasing current is accompanied by an ion redistribution, leading to a narrowing of the recombination zone. Hence, in absence of detrimental side reactions and doping‐related luminescence quenching, the ion concentration should be as high as possible.     

用监控开关模式占空比的方法诊断LED

工程师们一般通过监控HB LED（高亮度发光二极管）的正向电压VF来判断LED的好坏。正向电压的大幅变化可能表明一只或一串LED有品质退化,或完全损坏。对于多只串联的LED,其正向电压之和可以达到40V以上,如果电压不是以地为基准,则需要差动测量。除了大电压和差动测量的挑战以外,     

Pure-tone threshold estimation from extrapolated distortion product otoacoustic emission I/O-functions in normal and cochlear hearing loss ears

A new method for direct pure-tone threshold estimation from input/output functions of distortion product otoacoustic emissions (DPOAEs) in humans is presented. Previous methods use statistical models relating DPOAE level to hearing threshold including additional parameters e.g., age or slope of DPOAE I/O-function. Here we derive a DPOAE threshold from extrapolated DPOAE I/O-functions directly. Cubic 2 f1-f2 distortion products and pure-tone threshold at f2 were measured at 51 frequencies between f2=500 Hz and 8 kHz at up to ten primary tone levels between L2=65 and 20 dB SPL in 30 normally hearing and 119 sensorineural hearing loss ears. Using an optimized primary tone level setting (L1 = 0.4L2 + 39 dB) that accounts for the nonlinear interaction of the two primaries at the DPOAE generation site at f2, the pressure of the 2 f1-f2 distortion product pDP is a linear function of the primary tone level L2. Linear regression yields correlation coefficients higher than 0.8 in the majority of the DPOAE I/O-functions. The linear behavior is sufficiently fulfilled for all frequencies in normal and impaired hearing. This suggests that the observed linear functional dependency is quite general. Extrapolating towards pDP=0 yields the DPOAE threshold for L2. There is a significant correlation between DPOAE threshold and pure-tone threshold (r=0.65, p<0.001). Thus, the DPOAEs that reflect the functioning of an essential element of peripheral sound processing enable a reliable estimation of cochlear hearing threshold up to hearing losses of 50 dBHL without any statistical data.     

Optical and redox properties of a series of 3,4-ethylenedioxythiophene oligomers

The optical and redox properties of a series of 3,4-ethylenedioxythiophene oligomers (EDOTn, n=1-4) and their beta,beta'-unsubstituted analogues (Tn, n=1-4) are described. Both series are end capped with phenyl groups to prevent irreversible alpha-coupling reactions during oxidative doping. Absorption and fluorescence spectra of both series reveal a significantly higher degree of intrachain conformational order in the EDOTn oligomers. Oxidation potentials (E(PA1) and E(PA2)) determined by cyclic voltammetry reveal that those of EDOTn are significantly lower than the corresponding Tn oligomers as a consequence of the electron-donating 3,4-ethylenedioxy substitution. Linear fits of E(PA1) and E(PA2) versus the reciprocal number of double bonds reveal significantly steeper slopes for the EDOTn than for the Tn oligomers. This could indicate a more effective conjugation for the EDOTn series, confirmed by the fact that coalescence of E(PA1) and E(PA2) is reached already at relatively short chain lengths ( approximately 5 EDOT units) in contrast to the Tn series (>10 thiophene units). The stepwise chemical oxidation of the EDOTn and Tn oligomers in solution was carried out to obtain radical cations and dications. The energies of the optical transitions of the radical cations and dications as determined by UV/Vis/NIR spectroscopy were similar for the two series. These spectroscopic observations are consistent with quantum-chemical calculations performed on the singly charged molecules. Cooling solutions containing T2.+, T3.+, EDOT2.+, and EDOT3.+ revealed the reversible formation of dimers, albeit with a somewhat different tendency, expressed in the values for the dimerization enthalpy.     

Real-space measurement of the potential distribution inside organic semiconductors

We demonstrate that the soft nature of organic semiconductors can be exploited to directly measure the potential distribution inside such an organic layer by scanning-tunneling microscope (STM) based spectroscopy. Keeping the STM feedback system active while reducing the tip-sample bias forces the tip to penetrate the organic layer. From an analysis of the injection and bulk transport processes it follows that the tip height versus bias trace obtained in this way directly reflects the potential distribution in the organic layer.     

Solution‐Processed Organic Tandem Solar Cells

A solution‐processed polymer tandem cell fabricated by stacking two single cells in series is demonstrated. The two bulk‐heterojunction subcells have complementary absorption maxima at λ_max ～ 850 nm and λ_max ～ 550 nm, respectively. A composite middle electrode is applied that serves both as a charge‐recombination center and as a protecting layer for the first cell during spin‐coating of the second cell. The subcells are electronically coupled in series, which leads to a high open‐circuit voltage of 1.4 V, equal to the sum of each subcell. The layer thickness of the first (bottom) cell is tuned to maximize the optical absorption of the second (top) cell. The performance of the tandem cell is presently limited by the relatively low photocurrent generation in the small‐bandgap polymer of the top cell. The combination of our tandem architecture with more efficient small‐bandgap materials will enable the realization of highly efficient organic solar cells in the near future.