Novel detector implementations for 3G LTE downlink and uplink

We summarize our recent state-of-the-art programmable and reconfigurable detector and QR decomposition (QRD) implementations targeting 3G long term evolution (LTE) downlink and uplink requirements. The downlink transmission is based on the orthogonal frequency division multiplexing, whereas the uplink transmission uses a single-carrier frequency-division multiple access. The downlink implementations are based on the programmable transport triggered architecture (TTA) which provides a flexible and energy efficient architecture template. In TTA detector implementation, the LTE detection rate requirements up to 20 MHz bandwidth and 4 × 4 antenna system with 64-QAM, are achieved by using 1–6 programmable cores in parallel. Each core runs at 277 MHz clock frequency and consumes 55.5–64.0 mW depending on the detector configuration. The downlink detector is based on the selective spanning with fast enumeration algorithm. The uplink field-programmable gate array (FPGA) detector implementation is targeted for 4 × 4 antenna system and 64-QAM achieving a detection rate requirement for 20 MHz bandwidth. The used FPGA board for uplink implementation is Xilinx Virtex-6 and the implementation has been carried out using Xilinx Vivado high level synthesis tool. Two different detector architectures are implemented. The first one achieves the detection rate requirement with a single processing block running at 231 MHz and the latter one with four blocks in parallel, each running at 247 MHz. The implemented detector is based on the K-best algorithm. A multiple-input multiple-output receiver requires QRD to produce valid inputs for the detector. In addition to detector implementations, QRD is also implemented on both TTA and FPGA. Modified Gram–Schmidt algorithm is used in both QRD implementations.     

Ultrafast energy transfer dynamics of a bioinspired dyad molecule

A caroteno-purpurin dyad molecule was studied by steady-state and pump-probe spectroscopies to resolve the excited-state deactivation dynamics of the different energy levels as well as the connecting energy flow pathways and corresponding rate constants. The data were analyzed with a two-step multi-parameter global fitting procedure that makes use of an evolutionary algorithm. We found that following ultrafast excitation of the donor (carotenoid) chromophore to its S2 state, the energy flows via two channels: energy transfer (70%) and internal conversion (30%) with time constants of 54 and 110 fs, respectively. Additionally, some of the initial excitation is found to populate the hot ground state, revealing another limitation to the functional efficiency. At later times, a back transfer occurs from the purpurin to the carotenoid triplet state in nanosecond timescales. Details of the energy flow within the dyad as well as species associated spectra are disentangled for all excited-state and ground-state species for the first time. We also observe oscillations with the most pronounced peak on the Fourier transform spectrum having a frequency of 530 cm(-1). The dyad mimics the dynamics of the natural light-harvesting complex LH2 from Rhodopseudomonas acidophila and is hence a good model system to be used in studies aimed to further explain previous work in which the branching ratio between the competing pathways of energy loss and energy transfer could be manipulated by adaptive femtosecond pulse shaping.     

A Comparative Study of Pyrolysis Liquids by Slow Pyrolysis of Industrial Hemp Leaves,Hurds and Roots

This study assessed the pyrolysis liquids obtained by slow pyrolysis of industrial hemp leaves, hurds, and roots. The liquids recovered between a pyrolysis temperature of 275–350 °C, at two condensation temperatures 130 °C and 70 °C, were analyzed. Aqueous and bio-oil pyrolysis liquids were produced and analyzed by proton nuclear magnetic resonance (NMR), gas chromatography–mass spectrometry (GC-MS), and atmospheric pressure photoionization Fourier transform ion cyclotron resonance mass spectrometry (APPI FT-ICR MS). NMR revealed quantitative concentrations of the most abundant compounds in the aqueous fractions and compound groups in the oily fractions. In the aqueous fractions, the concentration range of acetic acid was 50–241 gL⁻¹, methanol 2–30 gL⁻¹, propanoic acid 5–20 gL⁻¹, and 1-hydroxybutan-2-one 2 gL⁻¹. GC-MS was used to compare the compositions of the volatile compounds and APPI FT-ICR MS was utilized to determine the most abundant higher molecular weight compounds. The different obtained pyrolysis liquids (aqueous and oily) had various volatile and nonvolatile compounds such as acetic acid, 2,6-dimethoxyphenol, 2-methoxyphenol, and cannabidiol. This study provides a detailed understanding of the chemical composition of pyrolysis liquids from different parts of the industrial hemp plant and assesses their possible economic potential.     

Pyrrolidinone-modified di- and tripeptides: highly diastereoselective preparation and investigation of their stability

Pyrrolidine-2,4-diones have been identified as a novel starting point for the synthesis of peptide analogues. This paper describes a method for the efficient and diastereoselective incorporation of this moiety into peptide chains to furnish di- and tripeptide analogs. The stability of these pyrrolidinone modified di- and tripeptides was found to be markedly improved when compared to that of a natural peptide. In addition, solid phase peptide synthesis employing a pyrrolidinone containing tripeptide is demonstrated.     

Hybrid Supramolecular and Colloidal Hydrogels that Bridge Multiple Length Scales

Hybrid nanocomposites were constructed based on colloidal nanofibrillar hydrogels with interpenetrating supramolecular hydrogels, displaying enhanced rheological yield strain and a synergistic improvement in storage modulus. The supramolecular hydrogel consists of naphthyl‐functionalized hydroxyethyl cellulose and a cationic polystyrene derivative decorated with methylviologen moieties, physically cross‐linked with cucurbit[8]uril macrocyclic hosts. Fast exchange kinetics within the supramolecular system are enabled by reversible cross‐linking through the binding of the naphthyl and viologen guests. The colloidal hydrogel consists of nanofibrillated cellulose that combines a mechanically strong nanofiber skeleton with a lateral fibrillar diameter of a few nanometers. The two networks interact through hydroxyethyl cellulose adsorption to the nanofibrillated cellulose surfaces. This work shows methods to bridge the length scales of molecular and colloidal hybrid hydrogels, resulting in synergy between reinforcement and dynamics.     

Superchiral Pd3L6 Coordination Complex and Its Reversible Structural Conversion into Pd3L3Cl6 Metallocycles

Large, non‐symmetrical, inherently chiral bispyridyl ligand L derived from natural ursodeoxycholic bile acid was used for square–planar coordination of tetravalent Pd^II, yielding the cationic single enantiomer of superchiral coordination complex 1 Pd₃ L ₆ containing 60 well‐defined chiral centers in its flower‐like structure. Complex 1 can readily be transformed by addition of chloride into a smaller enantiomerically pure cyclic trimer 2 Pd₃ L ₃Cl₆ containing 30 chiral centers. This transformation is reversible and can be restored by the addition of silver cations. Furthermore, a mixture of two constitutional isomers of trimer, 2 and 2′ , and dimer, 3 and 3′ , can be obtained directly from L by its coordination to trans‐ or cis‐N‐pyridyl‐coordinating Pd^II. These intriguing, water‐resistant, stable supramolecular assemblies have been thoroughly described by ¹H DOSY NMR, mass spectrometry, circular dichroism, molecular modelling, and drift tube ion‐mobility mass spectrometry.     

The inherent structural instability: concentration-dependent transformation of pyrogallarene to pyrogallarene lactones

Pyrogallarene shows concentration-dependent instability in dilute solutions resulting in elimination of two ketene molecules and formation of pyrogallarene lactones. This unexpected phenomenon, which is not observed with resorcinarenes, highlights the significance of the four hydroxyl groups at 2-position for the molecular characteristics of pyrogallarenes.