Morphology of dry lignins and size and shape of dissolved kraft lignin particles by X-ray scattering

Lignin is a highly branched polymer consisting of phenylpropane units, and it is one of the ingredients of the supporting matrix in plant cell walls. The morphology of several lignins extracted from plant cell walls using different methods was studied by small-angle and ultra-small-angle X-ray scattering. A power-law type intensity was observed for the dry lignins, but on the basis of the power-law exponent the fractal approach often applied to lignins is not fully justified. However, the intensity of kraft lignin did show a power law with surface fractal dimension D(s) = 2.7 +/- 0.1. The specific surface area of the lignins ranged from about 0.5 to 60 m(2)/g with 20% relative accuracy. The radius of gyration was determined from small-angle X-ray scattering data for aqueous solutions of kraft lignin. The shape of the particles in NaCl and NaOH solutions was found to be elongated. The particles were about 1-3 nm thick, while the length (5-9 nm) depended on the solvent and on the lignin concentration. The size of these primary particles was approximately the same as the size of the pores in the fractal aggregates of the dry kraft lignin. Their size was determined to be about 3.5 nm.     

Arrays of metallic nanocones fabricated by UV-nanoimprint lithography

We introduce a novel method for fabricating nanocones of various metals. Based on a combination of UV-nanoimprint lithography and electron beam evaporation, the method enables fast, high volume, and reproducible fabrication of conical nanostructures on flat substrates. We investigate cone formation with eight different metals and find that the shape of the cone depends on the material characteristics of the deposited metal.     

Fibrillar Constructs from Multilevel Hierarchical Self‐Assembly of Discotic and Calamitic Supramolecular Motifs

We here report on polymeric solid‐state self‐assembly leading to organization over six length scales, ranging from the molecular scale up to the macroscopic length scale. We combine several concepts, i.e., rod‐like helical and disc‐like liquid crystallinity, block copolymer self‐assembly, DNA‐like interactions to form an ionic polypeptide–nucleotide complex and packing frustration to construct mesoscale fibrils. Ionic complexation of anionic deoxyguanosine monophosphate (dGMP) and triblock coil–rod–coil copolypeptides is used with cationic end blocks and a helical rod‐like midblock. The guanines undergo Hoogsteen pairing to form supramolecular discs, they π‐stack into columns that self‐assemble into hexagonal arrays that are controlled by the end blocks. Packing frustration between the helical rods from the block copolymer midblock and the discotic motif limits the lateral growth of the assembly thus affording mesoscale fibrils, which in turn, form an open fibrillar network. The concepts suggest new rational methodologies to construct structures on multiple length scales in order to tune polymer properties.     

Analysis of band-to-band mixing distortion contributions in some usual circuit topologies

This paper uses hand analysis and a new fully numerical distortion contribution analysis technique to explain and optimize the nonlinear performance of analog circuits. Several example circuits are studied, where mixing of nonlinear distortion from one harmonic band to another is important. In some circuits the band-to-band mixing can be employed to reduce the overall distortion.     

Effect of residual lignin and heteropolysaccharides in nanofibrillar cellulose and nanopaper from wood fibers

Unbleached (UN), oxygen-delignified and fully-bleached (FB) birch fibers with a residual lignin content of ca. 3, 2 and <1 %, respectively, were used to produce nanofibrillated cellulose (NFC) and nanopaper by using an overpressure device. The tensile index, elongation and elastic modulus of nanopaper were compared and the effect of residual cell wall components accessed. Under similar manufacturing conditions, UN NFC produced nanopaper with a density of 0.99 g/cm³, higher than that from FB NFC (0.7 g/cm³). This translated in much lower air permeability in the case of UN nanopaper (1 and 11 mL/min for UN and FB samples, respectively). Fundamentally, these observations are ascribed to the finer fibrils produced during microfluidization of UN fibers compared to those from lower yield counterparts (AFM roughness of 8 and 17 nm and surface areas of 124 and 98 m²/g for NFC from UN and FB fibers, respectively). As a result, values of stress at break and energy absorption of nanopaper from high yield fibers are distinctively higher than those from fully bleached NFC. Interactions of water with the surface and bulk material were affected by the chemical composition and structure of the nanofibrils. While UN nanopaper presented higher water contact angles their sorption capacity (and rate of water absorption) was much higher than those measured for nanopaper from FB NFC. These and other observations provided in this contribution are proposed to be related to the mechanoradical scavenging capacity of lignin in high shear microfluidization and the presence of residual heteropolysaccharides.     

Probing lattice defects in Sr2MgSi2O7:Eu2+,Dy3+

The Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ materials were prepared with a solid state reaction and their microscopic structure (at 295 K only) and luminescence were studied at selected temperatures between 150 and 295 K. Undisturbed Sr crystal planes were common in the TEM images of the undoped Sr₂MgSi₂O₇ material, whereas with Eu²⁺ doping more disturbed planes were observed even in the nanometer scale. With Dy³⁺ co-doping, a large number of small lattice domains created by the discontinuities in the crystal structure was observed. The domains with different orientations seem to be centered around point defects. The decay curves of Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ showed fast (ms scale) persistent luminescence. The intensity of persistent luminescence increased considerably between 200 and 250 K while remaining constant in the ranges of 150–200 and 250–295 K. The changes were used to study the depth of the traps. In general, Dy³⁺ co-doping was found to deepen the traps.     

Essential oil composition of Vismia macrophylla leaves (Guttiferae)

The essential oil from Vismia macrophylla Kunth (Guttiferae) leaves, extracted by hydrodistillation, was analyzed by GC/MS. The oil obtained (yield 0.11%) contained twenty-eight compounds, which were identified from their retention indices and by comparison of their mass spectra with those in the Wiley GC-MS Library data base. The major components were beta-caryophyllene (20.1%), germacrene D (11.6%) and beta-elemene (7.0%).     

Essential oil composition and antibacteral activity of Vismia baccifera fruits collected from Mérida, Venezuela

The essential oil from the fruits of Vismia baccifera Triana & Planch. (Gutttiferae), collected in June 2009, was analyzed by GC/MS. A yield of 0.6% oil was obtained by hydrodistillation. Twenty-seven components were identified by comparison of their mass spectra with those in the Wiley GC-MS Library data base. The major components were trans-cadin-l1,4-diene (36.6%), cis-cadin-1,4-diene (18.8%) and beta-caryophyllene (11.9%). The essential oil showed a broad spectrum of antibacterial activity against the important human pathogenic Gram-positive and Gram-negative bacteria Staphylococcus aureus (ATCC 25923), Enterococcus faecalis (ATCC 29212), Escherichia coli (ATCC 25992), Pseudomonas aeruginosa (ATCC 27853) and Klebsiella pneumoniae (ATCC 23357) with MIC values ranging from 9 to 37 microg/mL.     

Highly luminescent octanuclear Au(I)-Cu(I) clusters adopting two structural motifs: the effect of aliphatic alkynyl ligands

Reactions of the homoleptic (AuC(2)R)(n) precursors with stoichiometric amount of diphosphine ligand PPh(2)C(6)H(4)PPh(2) (P^P) and Cu(+) ions lead to an assembly of a new family of bimetallic clusters [Au(6)Cu(2)(C(2)R)(6)(P^P)(2)](2+) (type I; R=9-fluorenolyl (1), diphenylmethanolyl (2), 2,6-dimethyl-4-heptanolyl (3), 1-cyclohexanolyl (4), Cy (5), tBu (6)). In the case of R=1-cyclohexanolyl, a structurally different complex [Au(6)Cu(2)(C(2)C(6)H(11)O)(6)(P^P)(3)](2+) (7, type II) could be obtained by treatment of 4 with one equivalent of the diphosphine, while for R=isopropanolyl only the latter type of cluster [Au(6)Cu(2)(C(2)C(3)H(7)O)(6)(P^P)(3)](2+) (8) was detected. Steric bulkiness of the alkynyl ligands and O···H-O hydrogen bonding are suggested to play an important role in stabilizing the type I and type II cluster structural motif, respectively. All the complexes exhibit intense photoluminescence in solution with emission parameters that depending on the geometrical arrangement of the octanuclear metal core. The clusters 1-4 and 6 show single emission band in a blue region (469-488 nm) with maximum quantum yield of 94% (4), while structurally different 7 and 8 emit yellow-orange (590 nm) with unity quantum efficiency. The theoretical DFT calculations of the electronic structures have been carried out to demonstrate that the metal-centered triplet emission within the heterometallic core plays a key role for the observed phosphorescence.