A Family of Far‐Infrared‐Transmitting Glasses in the Ga–Ge–Te System for Space Applications

Conditions of formation of bulk tellurium chalcogenide glasses, containing 70–80 at % Te associated to Ga and Ge are described. The characteristic temperatures are measured: the glass‐transition temperature, T_g, is situated in the range 140–185 °C and the difference T_x – T_g, where T_x is the onset crystallization temperature, is in the range 76–113 °C. Moreover, the optical transmission window is exceptional, ranging from 1.99 μm in the bandgap up to 28 μm in the phonon region. Developed within the framework of requirements for the Darwin mission (a search for and study of extrasolar planets), feasibility of infrared optical fibers formed from these glasses is studied. Drawing experiments are conducted with the glass Ga₂‐Ge₃Te₁₅, which possesses the maximum T_x – T_g, and a first optical fiber is presented.     

At least N+1 finite transmission zeros using frequency-variant negative source-load coupling

A second-order cross-coupled combline filter which has three finite transmission zeros is presented. The problem of the frequency-invariant coupling in a real circuit is introduced. To make extra transmission zeros, a top metalized dielectric block is used.     

Trenched‐Sinker LDMOSFET (TS‐LDMOS) Structure for 2 GHz Power Amplifiers

This paper proposes a new LDMOSFET structure with a trenched sinker for high‐power RF amplifiers. Using a low‐temperature, deep‐trench technology, we succeeded in drastically shrinking the sinker area to one‐third the size of the conventional diffusion‐type structure. The RF performance of the proposed device with a channel width of 5 mm showed a small signal gain of 16.5 dB and a maximum peak power of 32 dBm with a power‐added efficiency of 25% at 2 GHz. Furthermore, the trench sinker, which was applied to the guard ring to suppress coupling between inductors, showed an excellent blocking performance below ?40 dB at a frequency of up to 20 GHz. These results confirm that the proposed trenched sinker should be an effective technology both as a compact sinker for RF power devices and as a guard ring against coupling.     

Deep‐UV Photochemistry and Patterning of (Aminoethylaminomethyl)phenethylsiloxane Self‐Assembled Monolayers

The 193 nm photochemistry of (aminoethylaminomethyl)phenethylsiloxane (PEDA) self‐assembled monolayers (SAMs) under ambient conditions is described. The primary photodegradation pathways at low exposure doses (< 100 mJ cm^–2) are benzylic C–N bond cleavage (ca. 68 %), with oxidation of the benzyl C to the aldehyde, and Si–C bond cleavage (ca. 32 %). Amine‐containing photoproducts released from the SAM during exposure remain physisorbed on the surface, where they undergo secondary photolysis leading to their complete degradation and removal after ca. 1200 mJ cm^–2. NaCl(aq) post‐exposure rinsing removes the physisorbed materials, showing that degradation of the original PEDA species (leaving Si–OH) is substantially complete after ca. 450 mJ cm^–2. Consequently, patterned, rinsed PEDA SAMs function as efficient templates for fabrication of high‐resolution, negative‐tone, electroless metal and DNA features with good selectivity at low dose (i.e., ca. 400 mJ cm^–2) via materials grafting to the intact amines remaining in the unirradiated PEDA SAM regions.     

Positively Thermo‐Sensitive Monodisperse Core–Shell Microspheres

In this paper, we report on a novel family of monodisperse thermo‐sensitive core–shell hydrogel microspheres that is featured with high monodispersity and positively thermo‐responsive volume phase transition characteristics with tunable swelling kinetics, i.e., the particle swelling is induced by an increase rather than a decrease in temperature. The microspheres were fabricated in a three‐step process. In the first step, monodisperse poly(acrylamide‐co‐styrene) seeds were prepared by emulsifier‐free emulsion polymerization. In the second step, poly(acrylamide) or poly[acrylamide‐co‐(butyl methacrylate)] shells were fabricated on the microsphere seeds by free radical polymerization. In the third step, the core–shell microspheres with poly‐ (acrylamide)/poly(acrylic acid) based interpenetrating polymer network (IPN) shells were finished by a method of sequential IPN synthesis. The proposed monodisperse core–shell microspheres provide a new mode of the phase transition behavior for thermo‐sensitive “smart” or “intelligent” monodisperse micro‐actuators that is highly attractive for targeting drug delivery systems, chemical separations, sensors, and so on.     

High‐Performance,Monolithic Polyaniline Electrochemical Actuators

New polyaniline (PANI) asymmetric membranes were fabricated using a phase‐inversion technique with hexane as the coagulation bath. These membranes exhibit a dense structure with macrovoids distributed asymmetrically throughout the cross‐section. A stress–strain study demonstrated that the Young's modulus (1.421 GPa) and strain at break (7.6 %) of the new PANI asymmetric membranes prepared from hexane are approximately 12 and 4 times higher, respectively, than the values reported previously for the PANI integrally skinned asymmetric membranes (ISAMs) (123 MPa Young's modulus and 1.8 % strain at break). Furthermore, monolithic electrochemical actuators based on a single PANI asymmetric membrane were constructed, and a bending movement of up to 20 Hz was experimentally recorded in a hydrochloric acid aqueous solution. A lifetime of over 329 500 cycles was determined for these actuators at a ± 2° angular displacement (5 Hz). The lifetime is limited by a bending fatigue that creates a transversal crack on the PANI membrane at the air–water interface. Control over the actuator movement is also manifested by the linear dependences of the bending angle on the charge and of the angular velocity on the current. These relationships are independent of both the kind of applied electric signal and the frequency used.     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004