淄博广电总台7+1讯道数字分量转播车系统

本文以淄博广电总台7 1讯道数字分量转播车为例,浅谈该车的视频、音频系统以及设备配置情况.     

Euler configurations and quasi-polynomial systems

Consider the problem of three point vortices (also called Helmholtz’ vortices) on a plane, with arbitrarily given vorticities. The interaction between vortices is proportional to 1/r, where r is the distance between two vortices. The problem has 2 equilateral and at most 3 collinear normalized relative equilibria. This 3 is the optimal upper bound. Our main result is that the above standard statements remain unchanged if we consider an interaction proportional to r ^b, for any b < 0. For 0 < b < 1, the optimal upper bound becomes 5. For positive vorticities and any b < 1, there are exactly 3 collinear normalized relative equilibria. The case b = −2 of this last statement is the well-known theorem due to Euler: in the Newtonian 3-body problem, for any choice of the 3 masses, there are 3 Euler configurations (also known as the 3 Euler points). These small upper bounds strengthen the belief of Kushnirenko and Khovanskii [18]: real varieties defined by simple systems should have a simple topology. We indicate some hard conjectures about the configurations of relative equilibrium and suggest they could be attacked within the quasi-polynomial framework.     

MORPHOLOGY OF BLACK CARBON AEROSOLS AND UBIQUITY OF 50-NANOMETER BLACK CARBON AEROSOLS IN THE ATMOSPHERE

Different-sized aerosols were collected by an Andersen air sampler to observe the detailed morphology of the black carbon （BC） aerosols which were separated chemically from the other accompanying aerosols, using a Scanning Electron Microscope equipped with an Energy Dispersive X-ray Spectrometer （SEM-EDX）. The results indicate that most BC aerosols are spherical particles of about 50 nm in diameter and with a homogeneous surface. Results also show that these particles aggregate with other aerosols or with themselves to form larger agglomerates in the micrometer range. The shape of these 50-nm BC spherical particles was found to be very similar to that of BC particles released from petroleum-powered vehicular internal combustion engines. These spherical BC particles were shown to be different from the previously reported fullerenes found using Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry （MALDI-TOF-MS）.     

Bimodal fission in binary and ternary spontaneous fission of 252Cf

The hot bimodal fission of ²⁵²Cf is reexamined with new high-statistics data. We constructed a γ-γ-γ coincidence cube for binary fission and LCP-gated γ-γ matrix for ternary fission. By identifying the secondary fission fragments from their γ-ray transitions, we measured the yields for various fission splits. The normal neutron yield distribution is found to be Gaussian for Xe-Ru. However, the binary fission split of Ba-Mo is found to exhibit a bimodal neutron distribution with the “hot mode” corresponding to ≈3.1% of the total yield. In α ternary fission, the first measurements of yields for specific fission splits are presented. The Te-α-Ru and Xe-α-Mo neutron yields fit well with a single mode, but the Ba-α-Zr split shows evidence for an enhanced hot mode with an intensity of ≈13.8% of the normal mode. The text was submitted by the authors in English.     

A 16-Mbit/s adapter chip for the IBM token-ring local area network

The authors describe a 9.02×9.02-mm chip built in 1-μm CMOS with two levels of metal and an additional mask level for fabricating capacitors. It contains both analog and digital circuits and has provisions for self-test. The function includes the transmitter, receiver, protocol handler, an microprocessor, as well as interfaces for RAM/ROM storage, IBM PC bus, IBM PS/2 bus, IBM 3174 bus, and Motorola 68000 bus. The physical design terrains are formed by 24K circuits of standard cell gates, a 10K-circuit equivalent hand-honed custom microprocessor, and an analog macro. The chip operates from a single 5-V supply, and the power consumption is 0.8 W nominal at 16 Mb/s. The chip can also be operated at 4 Mb/s     

Annealing effect on soft magnetic properties and magnetoimpedance of Finemet Fe73.5Si13.5B9Nb3Au1 alloy

Effect of annealing on the soft magnetic properties of Fe_73.5Si_13.5B₉Nb₃Au₁ amorphous ribbon has been investigated by means of structure examination, magnetoimpedance ratio (MIR) and incremental permeability ratio (PR) spectra measured in the frequency range of 1–10 MHz at a fixed current of 10 mA X-ray diffraction analysis showed that the as-cast sample was amorphous and it became nanocrystalline under a proper heat treatment. When annealing amorphous alloy at 530 °C for 30, 60, 90 min, soft magnetic properties have been improved drastically. Among the samples investigated, the sample annealed at 530 °C for 90 min showed the softest magnetic behavior. The MIR and PR curves revealed the desirable changes in anisotropy field depending upon annealing.     

Magnetic structures in Ni80Fe20/Ru multilayers

Using polarized neutron reflectivity (PNR) measurements together with associated simulation, magnetic structures of two Ni₈₀Fe₂₀ (1 1 1)/Ru (0 0 0 1) multilayer samples with Ru thickness of 9 and 21 Å were investigated under various external magnetic fields at room temperature. The results reveal the existence of layer thickness, interface roughness, magnetic moment, interlayer coupling angle and non-collinear coupling. The former three are independent of Ru thickness; while the latter two are strongly dependent of Ru thickness.     

Analysis of the manufacturing lead time in a production system with non-renewal batch input,threshold policy and post-operation

In this paper, we analyze the manufacturing lead time in a production system with BMAP (Batch Markovian Arrival process) input and post-operation operated under the N-policy. We use the factorization principle to derive the waiting time distribution (hence the manufacturing lead time) and the mean performance measures. A numerical example is provided.     

Recent changes in A-level Mathematics: is the availability and uptake of mechanics declining yet more?

In the past 6 years changes have occurred in GCE A-levels. Inparticular, there have been several major changes in A-levelMathematics courses. As engineering students are usually requiredto have studied A-level Mathematics, or its equivalent, thesechanges have had an effect on their prior mathematical knowledge.Moreover, engineering students traditionally obtained a goodgrounding in mechanics as part of their A-level Mathematicsqualification. However, mechanics, which was once included inthe core syllabus, is now optional. This article investigatesthe current availability and uptake of mechanics modules withinA-level Mathematics courses in schools. Comparisons are drawnbetween these results and results of a survey of schools in2004 and surveys of first year engineering students conductedin 2004 and 2005. It is found that there is a decline in theavailability of mechanics modules and the uptake of more thanone mechanics module has also decreased. The implications ofthese findings for engineering educators are discussed.     

一种改进的共同进化遗传算法及其应用

将共同进化遗传算法应用于临床营养决策优化中,虽然取得了一定成果,但算法中仍存在早熟现象、局部搜索能量弱等问题,为此提出一种改进的共同进化模型。算法使用新的子群体划分方法和交叉算子,引入精英保留策略、信息交换原则和小生境技术。通过对糖尿病营养治疗的仿真表明,改进后的算法在保证群体多样性和避免早熟现象的前提下,提高了算法的局部和全局寻优能力,且膳食配方中营养素达标率符合要求,满足专家建议的糖尿病饮食需求。