Supramolecular H-bonded assemblies of redox-active metallodendrimers and positive and unusual dendritic effects on the recognition of H2PO4-

The DSM polyamine dendrimers dend-DAB-(NH2)x of generations 1 (x = 4) to 4 (x = 32) form H-bonded dendritic assemblies with the phenol AB3 units p-HOC6H4C(CH2CHCH2)3 and p-HOC6H4C{(CH2)3SiCH2NHCOFc}3 (Fc = ferrocenyl), as shown by the shifts of the NH2 and OH signals giving a concentration-dependent common signal between 2.4 and 4.1 ppm in CDCl3. The supramolecular dendrimers efficiently recognize H2PO4- anions with positive and unusual dendritic effects upon electrochemical titration involving half-stoichiometry for G1, a sudden cyclovoltammetry wave change at the equivalent point, and a dramatic intensity decrease of the new wave.     

Cyclopentadienyl substituent effects on reductive elimination reactions in group 4 metallocenes: kinetics,mechanism, and application to dinitrogen activation

The rate of reductive elimination for a family of zirconocene isobutyl hydride complexes, Cp(CpR(n)())Zr(CH(2)CHMe(2))H (Cp = eta(5)-C(5)Me(5), CpR(n)() = substituted cyclopentadienyl), has been measured as a function of cyclopentadienyl substituent. In general, the rate of reductive elimination increases modestly with the incorporation of sterically demanding substituents such as [CMe(3)] or [SiMe(3)]. A series of isotopic labeling experiments was used to elucidate the mechanism and rate-determining step for the reductive elimination process. From these studies, a new zirconocene isobutyl hydride complex, Cp' '(2)Zr(CH(2)CHMe(2))(H) (Cp' ' = eta(5)-C(5)H(3)-1,3-(SiMe(3))(2)), was designed and synthesized such that facile reductive elimination of isobutane and activation of dinitrogen was observed. The resulting dinitrogen complex, [Cp' '(2)Zr](2)(mu(2), eta(2),eta(2)-N(2)), has been characterized by X-ray diffraction and displays a bond length of 1.47 A for the N(2) ligand, the longest observed in any metallocene dinitrogen complex. Solution magnetic susceptibility demonstrates that [Cp' '(2)Zr](2)(mu(2), eta(2), eta(2)-N(2)) is a ground-state triplet, consistent with two Zr(III), d(1) centers. Mechanistic studies reveal that the dinitrogen complex is derived from the reaction of N(2) with the resulting cyclometalated zirconocene hydride rather than directly from reductive elimination of alkane.     

Iron(III)-catalyzed Prins-type cyclization using homopropargylic alcohol: a method for the synthesis of 2-alkyl-4-halo-5,6-dihydro-2H-pyrans

[reaction: see text] A new Prins-type cyclization between homopropargylic alcohol and aldehydes in the presence of FeX(3) to obtain 2-alkyl-4-halo-5,6-dihydro-2H-pyrans in good yield is described. Osmium-catalyzed cis dihydroxylation provided direct access to trans-2-alkyl-3-hydroxy-tetrahydro-pyran-4-ones. Anhydrous ferric halides are also shown to be excellent catalysts for the standard Prins cyclization using homoallylic alcohol. Isolation of an intermediate acetal provides substantiation of a proposed mechanism.     

Autoxidation kinetics of atactic polypropylene in bulk

The kinetics of the reaction between atactic polypropylene (APP) and oxygen in bulk at temperatures ranging from 170 to 210°C and oxygen partial pressures from 160 to 760 torr have been studied by thermal differential analysis. The reaction takes place in two successive steps, both giving hydroperoxide groups as product. Partial reaction orders with respect to APP and oxygen for the first step, which corresponds to the uncatalyzed attack of a C? H tertiary bond to give a hydroperoxide, are one and two, respectively. In the second step, interpreted as another attack on a tertiary C? H by oxygen, catalyzed by a neighboring hydroperoxide group, reaction orders are one and one-half for APP and oxygen, respectively. Activation parameters have been determined and a reaction sequence is proposed. Hydroperoxidated APP subsequently decomposes via a zero-order process giving methylketone groups as its main product. An interpretation of this process is also given.     

Volumetric Properties of the Ternary System 1,4-Dioxane + Butyl Acrylate + Ethyl Acrylate and Its Binary Butyl Acrylate + Ethyl Acrylate at 298.15 K

Densities of the ternary system 1,4-dioxane + butyl acrylate + ethyl acrylate and its binary butyl acrylate + ethyl acrylate have been measured in the whole composition range, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes of the binary system are positive and were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. Several models were used to correlate the ternary behavior from the excess molar volume data of their constituent binaries and were found equally good to fit the data. The best fit was based on a direct approach, without information on the component binary systems.     

Design and Application of a Set of Vitreous Standards for EDS-SEM Microanalysis of Melting Shop Slags

Non-metallic inclusions in steel are formed due to interactions between liquid steel and its environment in the melting shop (refractories and slags). Particles not trapped in the slag remain in the cast steel, impairing steel properties in service. Inclusion composition varies and certified standards covering the whole compositional range are unavailable.The present study describes the preparation of a set of homogeneous, glassy and crystalline standards with a wide compositional range for use in analysing non-metallic steel inclusions. For this, materials were designed based on knowledge of the compositional range of interest in the Al₂O₃–SiO₂–CaO–MgO–CaF₂ system, which is the matrix of the most frequent steel inclusions. The composition and microstructural homogeneity of the reference materials was verified.     

Effect of beta-cyclodextrin on the hydrolysis of trifluoroacetate esters

The hydrolysis of p-F, p-Cl, and m-Cl phenyl trifluoracetates was studied in the presence of beta-cyclodextrin (beta-CD). The reactions are inhibited by beta-CD at pH 6 while they are catalyzed in alkaline solution. MM3 calculations reproduce some of the experimental results. The substrates form inclusion complexes with beta-CD which are of similar stability as those of the corresponding acetates; however, the association of the transition state is less favorable in these reactions than in those of the acetates, and consequently less stronger catalysis is observed.     

Compact power-efficient class-AB CMOS exponential voltage to voltage converter

A novel implementation of a rail-to-rail exponential voltage to voltage converter is presented. It is based on a pseudo-exponential approximation that is easily achieved by the nonlinear currents of a class-AB transconductor. Measurement results for a 0.5 /spl mu/m CMOS technology show a 52 dB output voltage range with linearity error less than /spl plusmn/2 dB using a dual supply voltage of /spl plusmn/750 mV. The power dissipation is less than 40 /spl mu/W.     

Resolving overlapping peaks in ARXPS data: The effect of noise and fitting method

Peak-fitting of X-ray photoelectron spectroscopy (XPS) data can be very sensitive to noise when the difference on the binding energy among the peaks is smaller than the width of the peaks. This sensitivity depends on the fitting algorithm. Angle-resolved XPS (ARXPS) analysis offers the opportunity of employing the combined information contained in the data at the various angles to reduce the sensitivity to noise. The assumption of shared peak parameters (center and width) among the spectra for the different angles, and how it is introduced into the analysis, plays a basic role. Sequential fitting is the usual practice in ARXPS data peak-fitting. It consist on first estimating the center and width of the peaks from the data acquired at one of the angles, and then using those parameters as a starting approximation for fitting the data for each of the rest of the angles. An improvement of this method consists of averaging the centers and widths of the peaks obtained at the different angles, and then employing these values to assess the areas of the peaks for each angle. Another strategy for using the combined information is by assessing the peak parameters from the sum of the experimental data. The complete use of the combined information contained in the data-set is optimized by the simultaneous fitting method. It consists of the assessment of the center and width of the peaks by fitting the data at all the angles simultaneously. Computer-generated data was employed to compare the sensitivity with respect to noise between the sequential, averaged-sequential, sum, and simultaneous fitting methods. It is shown that the latter is significantly more robust and could provide reliable results even for noisy data and small peak separation. The fundamentals for the robustness of the simultaneous method are discussed, as well as the possibility of fitting many parameters at the same time. As an added feature of ARXPS, it was found that the estimation of the error intervals on the peak parameters is done remarkably more precisely by employing XPS data at various angles.     

5‐Methyl‐N‐[2‐nitro‐4‐(trifluoromethyl)phenyl]‐1H‐pyrazole‐3‐amine: a chain of hydrogen‐bonded R22(6) and R22(16) rings

The molecular skeleton of the title compound, C₁₁H₉F₃N₄O₂, is almost planar and exhibits a polarized (charge‐separated) electronic structure in the nitroaniline portion. Molecules are linked by N—H...N and C—H...O hydrogen bonds to form a chain in which centrosymmetric R₂²(6) and R₂²(16) rings alternate.