Study of the first nucleation steps of thin films by XPS inelastic peak shape analysis

The initial steps in the formation of thin films have been investigated by analysis of the peak shape (both inelastic background and elastic contributions) of X‐ray photoelectron spectra. Surface coverage and averaged height of the deposited particles have been estimated for several overlayers (nanometre range) after successive deposition cycles. This study has permitted the assessment of the type of nucleation and growth mechanisms of the films. The experiments have been carried out in situ in the preparation chamber of an XPS spectrometer. To check the performance of the method, several materials (i.e. cerium oxide, vanadium oxide and cadmium sulfide) have been deposited on different substrates using a variety of preparation procedures (i.e. thermal evaporation, ion beam assisted deposition and plasma enhanced chemical vapour deposition). It is shown that the first deposited nuclei of the films are usually formed by three‐dimensional particles whose heights and degree of surface coverage depend on the chemical characteristics of the growing thin film and substrate materials, as well as the deposition procedure. It is concluded that XPS peak shape analysis can be satisfactorily used as a general method to characterize morphologically the first nanometric moieties that nucleate a thin film. Copyright © 2006 John Wiley & Sons, Ltd.     

Simultaneous Kinetic‐Spectrophotometric Determination of Hydrazine and its Derivatives by Partial Least Squares and Principle Component Regression Methods

Simultaneous kinetic‐spectrophotometric determination of a ternary mixture of hydrazine (HZ) and its derivatives by principal component regression (PCR) and partial least squares (PLS) calibration is described. The methods were based on the difference observed in the reduction rate of iron(III) with HZ, thiosemicarbazide (TSCZ) and phenylhydrazine (PHZ) in the presence of 2,2′‐bipyridine (Bpy). The colored complex of [Fe(Bpy)₃]²⁺ was formed in sodium dodecyl sulfate (SDS) as micellar media, and then monitored at 520 nm. The results showed that simultaneous determination of HZ, TSCZ and PHZ could be performed in their concentration ranges of 1.0–70.0, 0.2–6.0 and 0.1–10.0 μg mL^?1, respectively. The root mean squares errors of prediction (RMSEP) of HZ, TSCZ and PHZ were 0.719, 0.164 and 0.105 (for PLS) 0.788, 0.166 and 0.993 (for PCR), respectively. Both methods (PCR and PLS) were validated using a set of synthetic sample mixtures and then applied for simultaneous determination of HZ, TSCZ and PHZ in water samples.     

An unusual chain cadmium(II) coordination polymer: catena‐poly[[(2,2′‐bipyridyl‐κ2N,N′)cadmium(II)]‐di‐μ‐chlorido‐[(2,2′‐bipyridyl‐κ2N,N′)cadmium(II)]‐di‐μ‐thiocyanato‐κ2N:S;κ2S:N]

The title complex, [CdCl(NCS)(C₁₀H₈N₂)]_n, represents an unusual Cd^II coordination polymer constructed by two types of anionic bridges and 2,2′‐bipyridyl (bipy) terminal ligands. These two types of bridges are arranged around inversion centers. The distorted octahedral coordination of the Cd^II center is provided by two chloride ions, one N‐ and one S‐donor atom from two thiocyanate ions, and a pair of N atoms from the chelating bipy ligand. Interestingly, adjacent Cd^II ions are interconnected alternately by paired chloride [Cd...Cd = 3.916 (1) Å] and thiocyanate bridges [Cd...Cd = 5.936 (1) Å] to generate an infinite one‐dimensional coordination chain. Furthermore, weak interchain C—H...S interactions between the bipy components and thiocyanate ions lead to the formation of a layered supramolecular structure.     

Alternating copolymer of thiophene andN‐(phenylethynyl)pyrrole. New π‐conjugated alternating five‐membered ring copolymer and its packing structure

An alternating copolymer, Copoly‐1 , of thiophene and N‐(phenylethynyl)pyrrole was prepared by palladium‐catalyzed polycondensation. Powder X‐ray diffraction (XRD) analysis indicated that Copoly‐1 formed a stacked packing structure with doubly‐running polymer main chains. Optical data support the molecular and packing structures of Copoly‐1 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2219–2224, 2005     

Itosides A – I,New Phenolic Glycosides from Itoa orientalis

Eight new benzoylated gentisyl alcohol (=2‐(hydroxymethyl)benzene‐1,4‐diol) glucosides, itosides A–H ( 1 – 8 ), together with the new pyrocatechol (=benzene‐1,2‐diol) glycoside itoside I ( 9 ) were isolated from the bark and twigs of Itoa orientalis (Flacourtiaceae). In itosides B–D ( 2 – 4 ), the gentisyl alcohol moiety was esterified by 1‐hydroxy‐6‐oxocyclohex‐2‐ene‐1‐carboxylic acid, while itosides E–H ( 5 – 8 ) contained instead an additional 2‐hydroxybenzoic acid moiety. The compounds were accompanied by the known derivatives 4‐hydroxytremulacin ( 10 ), poliothyrsoside ( 11 ), poliothyrsin ( 12 ), homaloside D ( 13 ), tremulacin, and pyrocatechol β‐D ‐glucopyranoside. The structures of the new compounds were elucidated by spectral and chemical methods.     

Stabilities in field electron emissions from noble‐metal covered W nano‐tips: apex structure dependence

We observed field emission microscopy (FEM) patterns of noble‐metal (NM) covered W nano‐tips with three different apex structures fabricated by field evaporation. Each of the three tips was terminated with a single atom, three atoms or ten atoms. We investigated the temporal changes in the FEM of these tips to discuss the stabilities in the spatial distributions of the field emission (FE) beams. The single‐atom tip showed two characteristics that were superior to the others. First, the beams emitted from the single‐atom tip were the most collimated among the three tips (the semi‐cone angle of 1.0° , FWHM). Second, adsorption of residual gas had little influence on FE from the single‐atom tip, while the other tips were easily contaminated even at ultra high vacuum, resulting in the emission fluctuation. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of polynucleotide analogs by grafting optically active adenine,cytosine, and hypoxanthine derivatives onto polytrimethylenimine

A new family of polynucleotide analogs were prepared by grafting nucleic acid base derivatives onto polytrimethylenimine. Several new optically pure α-nucleic acid base substituted propanoic acids were prepared as pendant groups. The (R)-ethyl adeninylpropanoate was obtained from adenine and (S)-ethyl lactate by utilizing a diethyl azodicarboxylate-triphenyl phosphine method. Subsequent hydrolysis of the ester in aqueous acid gave the (R)-adeninylpropanoic acid without racemization. The reaction of cytosine sodium salt with (S)-ethyl 2-[(methylsulfonyl)oxy] propanoate produced the 20% racemized (R)-ethyl 2-(cytosin-1-yl)propanoate. The optically pure ester was obtained by recrystallization from ethyl alcohol, which was hydrolyzed in aqueous acid to give the (R)-acid with 66% enantiomeric excess. The (R)-2-(hypoxanthin-9-yl)propanoic acid was prepared by reaction of (R)-2-(adenin-9-yl)propanoic acid with sodium nitrite. The pendant groups were allowed to react with N-hydroxy compounds in the presence of dicyclohexylcarbodiimide to give the active esters. These active esters underwent reaction with N,N-dipropylamine to provide monomer model compounds. The pendant groups were grafted onto polytrimethylenimine by using the active ester method. The racemization reactions were observed in the grafting reactions. The resulting polymers showed a range of percent grafting from 60 to 80%.     

A novel way to study the initial stages of soap-free emulsion polymerizations: The intercalation of polystyrene oligomers into hydrotalcite

The dominant species in the early stages of an emulsifier-free emulsion polymerization of styrene has been found to be an oligomer of two to three monomer units using a novel trapping technique. This involved the intercalation of charged primary oligomers between the layers of a hydrotalcite, [Mg₄Al₂(OH)₁₂]²⁺[A]^2- (where A = dianion). Hydrotalcites are an important class of lamellar, inorganic compounds whose interlayer spacing can be mod-ified by anion exchange. Our approach first involved preparing a hydrotalcite precursor in which the layers were propped apart by an organic dianion (terephthalate = TA). This material was then used to capture the negatively charged polystyrene oligomers from the emulsion polymerization reaction mixture. We found that TA was rapidly ion-exchanged for the charged oligomers. The resulting pillared hydrotalcite material was characterized using XRD and SEC. We found that the interlayer spacing between the hydroxide layers increased to 23.2 Å on exposure to the emulsion reaction mixture. This represents an interlayer expansion of 18.3 Å (after subtraction of the hydroxide layer contribution), which is cnsistent with intercalation of oligomers with two to three monomer units arranged in a bilayer. This size estimate was confirmed by the results of size exclusion chromatography. © 1995 John Wiley & Sons, Inc.     

16-脱氢孕烯醇酮醋酸酯的环境友好合成法

Instead of environmentally toxic chromium oxidant, singlet oxygen generated photcchemically was used as environmentally friendly and benign oxidizing agent to accomplish the transformation of pseudodiosgenin diacetate to diosone efficiently in a low toxic and less expensive solvent acetone. Accordingly 16-dehydropregnenolone acetate(16-DPA), an important intermediate for preparation of steroidal drugs, was prepared in good yield (75%) when photoreaction was run in acetone/acetic anhydride/pyridine system. The mild reaction condition as well as simple and environmentally friendly process made the method commercially viable and important for production of 16-DPA in industrial scale.     

Synthesis and Structure of the New Compound La2O(CN2)2 Possessing an Interchanged Anion Proportion Compared to the Parent La2O2(CN2). Synthese und Kristallstruktur der neuen Verbindung La2O(CN2)2 mit einem vertauschten Anionenverhältnis gegenüber der Bezugsverbindung La2O2(CN2)

La₂O(CN₂)₂ was synthesized from a 1:1:2 molar reaction mixture of LaCl₃, LaOCl, and Li₂(CN₂) at 650 °C. Well developed single crystals were grown from a LiCl‐KCl flux. The crystal structure was refined as monoclinic (space group C2/c, Z = 2, a = 13.530(2) Å, b = 6.250(1) Å, c = 6.1017(9) Å, β = 104.81(2)°) from single crystal X‐ray diffraction data. The La³⁺ and (CN₂)^2— ions in the crystal structure of La₂O(CN₂)₂ can be compared to Fe³⁺ and S₂^2— ions in the cubic pyrite structure, being arranged like in a distorted NaCl type structure with their centers of gravity. In addition, the O^2— ions in La₂O(CN₂)₂ are occupying 1/4 of the tetrahedral voids formed by the arrangement of metal ions.