Acidichromism in the Mixed Langmuir—Blodgett Films of Stearic Acid with a Carbazole—containing Schiff Base

ＩｎｔｒｏｄｕｃｔｉｏｎＲｅｖｅｒｓｉｂｌｅｃｏｌｏｒｃｈａｎｇｅｓｕｐｏｎｅｘｔｅｒｎａｌｏｒｉｎｔｅｒｎａｌｓｔｉｍｕｌａｔｉｏｎｓｈａｖｅｂｅｅｎａｔｔｒａｃｔｉｎｇｍｕｃｈａｔｔｅｎｔｉｏｎｄｕｅｔｏｔｈｅｉｒｕｔｉｌｉｔｙａｓｆｕｎｃｔｉｏｎａｌｍａｔｅｒｉａｌｓ .Ｆｏｒｅｘａｍｐｌｅ ,ｐｈｏ ｔｏｃｈｒｏｍｉｓｍｄｅｓｃｒｉｂｅｓｔｈｅｃｏｌｏｒｃｈａｎｇｅｓｉｎｄｕｃｅｄｂｙｐｈｏ ｔｏｉｒｒａｄｉａｔｉｏｎａｎｄｃａｎｂｅｕｓｅｄａｓｐｈｏｔｏ ｒｅｃｏｒｄｉｎｇｍａｔｅｒｉ ａｌｓ…     

Pt‐Nanoparticle Incorporated Carbon Paste Electrode for the Determination of Cu(II) Ion by Anodic Stripping Voltammetry

Pt‐nanoparticles were synthesized and introduced into a carbon paste electrode (CPE), and the resulting modified electrode was applied to the anodic stripping voltammetry of copper(II) ions. The synthesized Pt‐nanoparticles were characterized by cyclic voltammetry, scanning electron microscopy and X‐ray photoelectron spectroscopy techniques to confirm the purity and the size of the prepared Pt‐nanoparticles (ca. 20 nm). This incorporated material seems to act as catalysts with preconcentration sites for copper(II) species that enhances the sensitivity of Cu(II) ions to Cu(I) species at a deposition potential of ?0.6 V in an aqueous solution. The experimental conditions, such as, the electrode composition, pH of the solution, pre‐concentration time, were optimized for the determination of Cu(II) ion using as‐prepared electrode. The sensitivity changes on the different binder materials and the presence of surfactants in the test solution. The interference effect of the coexisted metals were also investigated. In the presence of surfactants, especially TritonX‐100, the Cu(II) detection limit was lowered to 3.9×10^?9 M. However, the Pt‐nanoparticle modified CPE begins to degrade when the period of deposition exceeds to 10 min. Linear response for copper(II) was found in the concentration range between 3.9×10^?8 M and 1.6×10^?6 M, with an estimated detection limit of 1.6×10^?8 M (1.0 ppb) and relative standard deviation was 4.2% (n=5).     

Chemical Constituents from the Root of Antidesma Pentandrum var. Barbatum

Investigation of the root extract of Antidesma pentandrum var. barbatum led to the isolation of seven new compounds, antidesmol ( 1 ), antidesmanins E ( 2 ) and F ( 3 ), antidesnone ( 4 ), antidesnol ( 5 ), barbatumols A ( 6 ) and B ( 7 ), together with 14 known compounds including sodium aristolochate‐I ( 10 ) and aristolochic acid‐I methyl ester ( 11 ).     

Effect of short-term ethanol on the proliferative response of Swiss 3T3 cells to mitogenic growth factors

Both adaptive and deleterious responses of cells to ethanol are likely triggered by short-term interactions of the cells with ethanol. Many studies have demonstrated the direct effect of ethanol on growth factor-stimulated cell proliferation. Using Swiss 3T3 cells whose growth was inhibited by ethanol in a concentration-dependent manner, we further investigated the molecular mechanisms of acute ethanol treatment by examining its effect on EGF- and PDGF-mediated cellular signaling systems for the mitogenic function. Tyrosine autophosphorylation of the growth factor receptors was partially prevented by ethanol in intact cells. When ethanol was included before or after EGF stimulation, no effect on the receptor signaling was observed. Here we also report that ethanol inhibits activation of ERK induced by both EGF and PDGF. EGF-induced JNK activation was reduced but PDGF-induced rapid JNK activation was delayed by the addition of ethanol. The balance between its inhibitory and stimulatory effect on the signaling molecules might determine the rate of cell growth.     

An in vitro Study on Transition from NO-Hemoglobin to Methemoglobin： Oxygen Effect

The nitrosyl-hemoglobin (HbNO) is the carrier of nitric oxide (NO) which is the important messenger molecule displaying multiple physiologic and pathophysiologic roles. However it is still not clear for the fate of HbNO molecules during the venous-arterial transit. In this letter, the HbNO transition in vitro was studied by using the electron paramagnetic resonance (EPR) spectra. It was found that HbNO molecules were stable when oxygen did not exist in the system but not stable in aerobic conditions. The absorption spectra further revealed that the methemoglobin (metHb) was the product of HbNO in aerobic environment, showing that the HbNO changed to metHb when there were enough oxygen molecules in the system.     

Separation of Dyes from Aqueous Solutions by Paper Adsorption

Separation of the dyes methyl violet, methylene blue, and congo red from aqueous solutions by paper capillary permeation adsorption method was studied using paper. Nearly 100% of the investigated dyes could be separated under the optimum conditions. The effect of pH on the separation efficiency was studied in particular. At pH 5–9, 1.3–11, and 7–11, the maximum separation was achieved for methyl violet, methylene blue and congo red, respectively. The effects of dye concentration and some foreign ions on the separatability were examined. Moreover, the selective separation of some dyes was attempted by elution with chemical reagents.     

Tuning chirality of single-wall carbon nanotubes by selective etching with carbon dioxide

CO2 molecule chemisorbs selectively on the zigzag tube edge without an activation barrier, whereas it physisorbs on the armchair edge of nanotubes. In addition, carbon nanotubes can be etched by an adsorbed oxygen atom of CO2 molecule. From our results, we suggest a selective etching mechanism for tuning the chirality of the mass-produced carbon nanotubes.     

Simple mimetics of a nuclear localization signal (NLS)

[reaction: see text] Molecular modeling was used to design mimetics of the HIV-1 matrix protein nuclear localization signal (NLS) in which a scaffold of two resorcinol units joined by a diamide linker presents 3-aminopropyl ethers in place of lysine side chains. Prospective mimetics with linkers of 6, 8, 10, or 12 atoms were synthesized and compared in a competition assay for binding to the nuclear import receptor subunit karyopherin alpha, showing the 10-atom linker to be best and shorter ones ineffective.     

Reversible replication between ordered mesoporous silica and mesoporous carbon

Highly ordered mesoporous silica can be regenerated from a mesoporous carbon CMK-3 that is a negative replica of mesoporous silica SBA-15, indicating reversible replication between carbon and inorganic materials.