A solvothermal synthesis and the structure of K4Ag2Sn3S9 x 2KOH

A novel layered K(4)Ag(2)Sn(3)S(9) x 2KOH was synthesized solvothermally. A mixture of ethanol and HSCH(2)CH(SH)CH(2)OH was used for the synthesis. The HSCH(2)CH(SH)CH(2)OH plays an important role and appears to serve as a mineralizer for the solvothermal reaction. A layer comprises Sn(3)S(9)(6)(-) clusters linked by Ag(+) ions and possesses two types of 1D channels in which potassium ions are located. The compound crystallizes in the monoclinic P2(1)/m space group [a = 7.8071(2) A, b = 27.3508(1) A, c = 10.5008(2) A, alpha = 90 degrees, beta = 103.874(1) degrees, gamma = 90 degrees, Z = 4]. Its crystal structure, composition analysis, and IR are presented.     

UV-blocking property of dumbbell-shaped ZnO crystallites on cotton fabrics

A facile process to prepare uniform dumbbell-shaped ZnO crystallites was presented. The evidence in this Article discovered a unique morphological effect on the UV-blocking property. The as-prepared ZnO crystallites were characterized by XRD, HRTEM, FESEM, UV-blocking, and Raman scattering spectra. Our tentative investigation created a breakthrough to both the ultrahigh "Ultraviolet protection factor" (UPF) and the overall-range of complete UV-radiation blocking. Therefore, the as-prepared structural material demonstrated a significant advance in protective functional treatment and provided a potential commercialization.     

Acidities in cyclohexanediols enhanced by intramolecular hydrogen bonds

Equilibrium gas-phase acidities of the six isomeric cyclohexanediols were measured in a Fourier transform ion cyclotron resonance mass spectrometer. Although all six cyclohexanediols have the same functional groups and similar structures, the acidities vary over 11 kcal/mol. This large difference is due mostly to the balance between hydrogen bonding and geometric strain. To understand the origins of the acidity differences in more detail, the conformations and energetics of the cyclohexanediols were studied using density functional theory, which gave good agreement with the experimental acidities. Finally, methanol-methoxide and methanol-methanol interactions were used as a model for the hydrogen bonding.     

Calculations on the octupolar molecules with enhanced two-photon absorption cross sections based on the Zn (II) and Cu (I) as centers

The equilibrium geometries, electronic structures, as well as one- and two-photon absorption cross sections of a series of octupolar chromophores with Zn(2+) or Cu(+) as coordinate centers and 4,4'-bis(dibutylaminostyryl)-[2,2']-bis(bipyridyl) as ligands have been determined by using B3LYP/6-31G and ZINDO methods. These molecules are designed by controlled combination of two or three bipyridyl ligands with the metal centers. The results show that Zn(2+) is an effective template for the design of octupolar structures which enable it to form tetrahedral and octahedral coordinated complexes; while Cu(+) only exists in a tetrahedral coordinated complex, comparing the tetrahedral complex with Zn(2+) as the center with that of Cu(+) as the center, it is found that the complex with the Cu(+) center is a better two-photon absorption material than the former as far as the transparency/nonlinearity is concerned. Furthermore, for the same metal center of Zn(2+), both one- and two-photon absorptions of the tetrahedral complex are redshifted relative to those of the octahedral complex, is attributed to the spiroconjugation effect in the tetrahedral complex. Our theoretical findings are consistent with recent experimental observations and provide an important foundation for the design of improved transparency-nonlinearity two-photon absorption materials.     

Optimization of the abnormal Beckmann rearrangement: application to steroid 17-oximes

A novel and practical procedure was developed for the abnormal Beckmann rearrangement of steroid 17-oximes. Treatment of the 17-oximes with TFA/CH(OMe)(3) in boiling THF for 2 h gives the corresponding 13,17-seco alkene nitrile products in unprecedented high yields (70-92%). Since the alkene nitriles can be subsequently converted into 18-norsteroids, this general method provides a highly efficient route to these biologically important compounds and, by extension, to other structurally related natural products.     

羧甲基壳聚糖/聚乙烯醇/甘油环氧树脂蛇笼型复合螯合膜的制备及对金属离子的吸附性能

以交联甘油环氧树脂交联的聚乙烯醇(PVA)为笼树脂，羧甲基壳聚糖(CCTS)为蛇树脂制备了具有蛇笼结构的复合螯合膜，研究了其对Cu^2 、Ni^2 、Pb^2 、Fe^3 、Zn^2 ，Hg”^2 、Cd^2 等金属离子的吸附性能，研究表明，该树脂对Cu^2 、Ni^2 、Pb^2 有较好的吸附性能，其中PVA是对Cu^2 的吸附的主要贡献者，而CCTS则是在对Ni^2 的吸附中起主要作用。该树脂可以用于含Cu^2 废水的处理。     

TiO2 sol-gel derived amperometric biosensor for H2O2 on the electropolymerized phenazine methosulfate modified electrode

A novel hydrogen peroxide biosensor was developed based on the immobilization of horseradish peroxidase (HRP) in a TiO(2) sol-gel matrix on an electropolymerized phenazine methosulfate (PMS) modified electrode surface. Such membranes are of interest due to their high surface area, biological compatibility, and ease of fabrication. HRP entrapped in the TiO(2) matix was stable and retained its activity to a large extent. Cyclic voltammetry and amperometric measurements were employed to demonstrate the feasibility of electron transfer between immobilized HRP and the glassy carbon electrode via electropolymerized PMS. The influence of various experimental parameters such as operating potential, pH, temperature, and stability was investigated for optimum analytical performance. The biosensor provided a wide linear calibration range from 4.0x10(-6) M to 1.0x10(-3) M, with a detection limit of 8.0x10(-7) M at a signal-to-noise ratio of 3. The sensor retained 80% of its original activity after two months of operation.     

Advanced Current Collectors for Alkali Metal Anodes

High-energy-density batteries are in urgent need to solve the ever-increasing energy storage demand for portable electronic devices, electric vehicles, and renewable solar and wind energy systems. Alkali metals, typically lithium(Li), sodium(Na) and potassium(K), are considered as the promising anode materials owing to their low electrochemical potential, low density, and high theoretical gravimetric capacities. However, the problem of dendrite growth of alkali metals during their plating/stripping process will lead to low Coulombic efficiencies, a short lifespan and huge volume expansion, eventually hindering their practical commercialization. To resolve this issue, a very effective approach is engineering the anodes on structured current collectors. This review summarizes the development of the alkali metal batteries and discusses the recent advances in rational design of anode current collectors. First, the challenges and strategies of suppressing alkali-metal dendrite growth are presented. Then the special attention is paid to the novel current collector design for dendrite-free alkali metal anodes. Finally, we give conclusions and perspective on the current challenges and future research directions toward advanced anode current collectors for alkali metal batteries.     

Recent advances in single atom catalysts for the electrochemical carbon dioxide reduction reaction

The electrochemical carbon dioxide reduction reaction (CO₂RR) offers a promising solution to mitigate carbon emission and at the same time generate valuable carbonaceous chemicals/fuels. Single atom catalysts (SACs) are encouraging to catalyze the electrochemical CO₂RR due to the tunable electronic structure of the central metal atoms, which can regulate the adsorption energy of reactants and reaction intermediates. Moreover, SACs form a bridge between homogeneous and heterogeneous catalysts, providing an ideal platform to explore the reaction mechanism of electrochemical reactions. In this review, we first discuss the strategies for promoting the CO₂RR performance, including suppression of the hydrogen evolution reaction (HER), generation of C₁ products and formation of C₂₊ products. Then, we summarize the recent developments in regulating the structure of SACs toward the CO₂RR based on the above aspects. Finally, several issues regarding the development of SACs for the CO₂RR are raised and possible solutions are provided.

The electrochemical carbon dioxide reduction reaction (CO₂RR) offers a promising solution to mitigate carbon emission and at the same time generate valuable carbonaceous chemicals/fuels.     

Remote substituent effects on bond dissociation energies of para-substituted aromatic silanes

UB3LYP/6-31G(d) and ROMP2/6-311++G(d,2p) methods were used to calculate the Si-X bond dissociation energies (BDEs) of a number of para-substituted aromatic silanes (4-Y-C(6)H(4)-SiH(2)X, where X = H, F, Cl, or Li). It was found that the substituent effect on the Si-H BDE of 4-Y-C(6)H(4)-SiH(3) was small, as the slope (rho(+)()) of the BDE- regression was only 0.09 kJ/mol. In comparison, the substituent effect on the Si-F BDE of 4-Y-C(6)H(4)-SiH(2)F was much stronger, whose rho(+ )()value was -2.34 kJ/mol. The substituent effect on the Si-Cl BDE of 4-Y-C(6)H(4)-SiH(2)Cl was also found to be strong with a rho(+)() value of -1.70 kJ/mol. However, the substituent effect on the Si-Li BDE of 4-Y-C(6)H(4)-SiH(2)Li was found to have a large and positive slope (+9.12 kJ/mol) against. The origin of the above remarkably different substituent effects on the Si-X BDEs was found to be associated with the ability of the substituent to stabilize or destabilize the starting material (4-Y-C(6)H(4)-SiH(2)X) as well as the product (4-Y-C(6)H(4)-SiH(2)* radical) of the homolysis. Therefore, the direction and magnitude of the effects of Y-substituents on the Z-X BDEs in compounds such as 4-YC(6)H(4)Z-X should have some important dependence on the polarity of the Z-X bond undergoing homolysis. This conclusion was in agreement with that from earlier studies (for example, J. Am. Chem. Soc. 1991, 113, 9363). However, it indicated that the proposal from a recent work (J. Am. Chem. Soc. 2001, 123, 5518) was unfortunately not justified.