铝合金表面电偶腐蚀与电子功函数的关系

铝合金中经常会引入一些第二相来改善其性能,第二相由于和铝基体的电位差不同,将会对铝合金的局部腐蚀产生重大的影响.为了揭示铝合金腐蚀的物理本质,本文利用基于密度泛函理论第一性原理的计算方法,详细计算了铝合金中一些主要第二相(Al_2Cu、Al_3Ti和Al_7Cu_2Fe)的多种晶面的电子功函数,分析了电子从各个晶面逸出的难易,求得了第二相与Al基体的本征电势差,我们发现不同的晶面暴露在合金最外层,会显著地影响本征电势差;即便是同一晶面,暴露在最外层的原子种类和构型不同,对腐蚀的影响也不一样.从电子的层面解释了电偶腐蚀发生的原因.     

Palladium‐Catalyzed Decarboxylative Cycloaddition of Vinylethylene Carbonates with Formaldehyde: Enantioselective Construction of Tertiary Vinylglycols

An efficient method for the enantioselective construction of tertiary vinylglycols through a palladium‐catalyzed asymmetric decarboxylative cycloaddition of vinylethylene carbonates with formaldehyde was developed. By using a palladium complex generated in situ from [Pd₂(dba)₃]?CHCl₃ and a phosphoramidite ligand as a catalyst under mild reaction conditions, the process allows conversion of racemic 4‐substituted 4‐vinyl‐1,3‐dioxolan‐2‐ones into the corresponding 1,3‐dioxolanes, as methylene acetal protected tertiary vinylglycols, in high yields with good to excellent enantioselectivities.     

A Bioorthogonal Small‐Molecule‐Switch System for Controlling Protein Function in Live Cells

Chemically induced dimerization (CID) has proven to be a powerful tool for modulating protein interactions. However, the traditional dimerizer rapamycin has limitations in certain in vivo applications because of its slow reversibility and its affinity for endogenous proteins. Described herein is a bioorthogonal system for rapidly reversible CID. A novel dimerizer with synthetic ligand of FKBP′ (SLF′) linked to trimethoprim (TMP). The SLF′ moiety binds to the F36V mutant of FK506‐binding protein (FKBP) and the TMP moiety binds to E. coli dihydrofolate reductase (eDHFR). SLF′‐TMP‐induced heterodimerization of FKBP(F36V) and eDHFR with a dissociation constant of 0.12 μM . Addition of TMP alone was sufficient to rapidly disrupt this heterodimerization. Two examples are presented to demonstrate that this system is an invaluable tool, which can be widely used to rapidly and reversibly control protein function in vivo.     

Gold(I)‐Catalyzed Diazo Coupling: Strategy towards Alkene Formation and Tandem Benzannulation

A gold(I)‐catalyzed cross‐coupling of diazo compounds to afford tetrasubstituted alkenes has been developed by taking advantage of a trivial electronic difference between two diazo substrates. A N‐heterocyclic‐carbene‐derived gold complex is the most effective catalyst for this transformation. Based on this new strategy, a gold(I)‐initiated benzannulation has been achieved through a tandem reaction involving a diazo cross‐coupling, 6π electrocyclization, and oxidative aromatization.     

Ultrasound/microwave‐assisted extraction and comparative analysis of bioactive/toxic indole alkaloids in different medicinal parts of Gelsemium elegans Benth by ultra‐high performance liquid chromatography with MS/MS

Indole alkaloids are the main bioactive/toxic components in Gelsemium elegans Benth. To determine the distribution and contents of indole alkaloids in its different medicinal parts, a novel and rapid method using ultra‐high performance LC (UPLC) with MS/MS has been established and validated with an optimized ultrasound/microwave‐assisted extraction method. Four constituents, namely, humantenidine, humantenmine, gelsemine, and koumine, were simultaneously determined in 6 min. Chromatographic separation was achieved on an ultra‐high performance LC BEH C₁₈ column with a gradient mobile phase consisting of methanol and water (containing 0.1% formic acid both in methanol and water) at a flow rate of 0.3 mL/min. The detection was performed on a triple quadrupole electrospray MS/MS by positive ion multiple‐reaction monitoring mode. All the analytes showed good linearity (r ≥ 0.9934) within a concentration range from 0.1–25 μg/mL with a LOQ of 25–50 ng/mL. The overall intra‐ and intervariations of four components were <4.7% with an accuracy of 97.3–101.3%. The analysis results showed that there were remarkable differences in the distribution and contents of four chemical markers in the roots, stems, and leaves of G. elegans Benth. The findings can provide necessary and meaningful information for the rational utilization of its resources.     

极谱法测定矿石及冶金渣中铍含量

矿石及冶金渣试样与过氧化钠在700℃熔融,用温水浸取,以一定量盐酸酸化后定容。分取部分试样溶液使其中铍(Ⅱ)与铍试剂Ⅲ在EDTA、氯化铵和氨水底液中,生成稳定的配合物,该配合物于-0.80V(vs.SCE)处产生一灵敏的吸附波,其峰电流的二阶导数与铍(Ⅱ)的质量浓度在0.004~0.20mg·L-1范围内呈线性关系,检出限(3S/N)为0.3μg·L-1。方法用于了7个矿石及冶金渣样品的分析,所得测定值与认定值一致。方法的加标回收率在96.0%~105%之间,相对标准偏差(n=6)在1.3%~9.7%之间。     

反相高效液相色谱法同时测定壮阳类保健品中达泊西汀和4种PDE5抑制剂

提出了反相高效液相色谱法同时测定壮阳类保健品中4种PDE5抑制剂和达泊西汀含量的方法。样品溶于水中,再加甲醇提取。分取10μL提取液进样,并用Inertsil ODS-SP色谱柱为分离柱和由(A)三乙胺-乙酸-水(8+4+988)混合液,(B)乙腈和(C)0.02%(φ)磷酸溶液三者按不同比例相混的混合液作流动相进行梯度淋洗和分离。在检测波长290nm处进行测定。他达那非的质量浓度在1.25~25.0mg·L-1范围内与其峰面积呈线性关系,其余4种化合物的质量浓度在5.0~100mg·L-1范围内与其峰面积呈线性关系,方法的检出限(3S/N)在0.05~0.2mg·L-1之间。加标回收率在94.1%~109%之间,测定值的相对标准偏差(n=6)均小于1.0%。     

固相萃取-高效液相色谱法测定偶氮染料橙黄G的降解产物1-胺基-2-萘酚-6,8-二磺酸

提出了固相萃取-高效液相色谱法测定偶氮染料橙黄G的Fenton反应降解溶液中1-胺基-2-萘酚-6,8-二磺酸。用OnGuardⅡH固相萃取小柱去除降解液中的Fe2+,C18柱为分离柱,以乙腈-10mmol·L-1乙酸铵(20+80)溶液为流动相洗脱,检测波长为254nm。1-胺基-2-萘酚-6,8-二磺酸的线性范围为0.05~5.0mg·L-1,检出限(3S/N)为0.15mg·L-1。加标回收率在92.1%~99.2%之间,日内及日间相对标准偏差分别在2.8%~3.4%,4.1%~7.7%之间。     

含Ti的HMS介孔材料催化剂及其对丙烯环氧化催化性能的研究

分别用水热合成法和气相四氯化钛(TiCl4)接枝法制备了Ti-HMS和Ti/HMS催化剂.表征结果表明,经过气相TiCl4接枝后的样品依然保持HMS(Hexagonal Mesoporous Silica,缩写为HMS)介孔材料特征,钛(Ti)物种主要以四配位的活性位形式存在.经过甲基接枝处理的催化材料,增加了表面的疏水性.丙烯环氧化反应结果表明,SN-Ti/HMS具有更高的催化性能.在2 500 h的稳定试验中,过氧化氢异丙苯(CHP)转化率大于99.0%,环氧丙烷(PO)选择性大于96.0%.研究和优化了环氧化反应工艺条件.采用浓度为30%的CHP为原料,CHP重量空速为1.0 h-1,床层温度为100℃,反应压力为3.0 MPa.     

多组分烟用香精定量分析方法的研究进展

综述了近年来烟用香精、香料各组分化合物的定量分析方法的研究进展。面积归一化法、内标法、外标法和标准加入法等常用色谱定量分析方法主要用于烟用香精、香料中目标化合物或单个组分的测定;多标定量法、特征峰-内标定量法和多元校正法能深入剖析烟用香精复杂体系中各组分含量(引用文献48篇)。