The stability of the equilibrium of holonomic conservative systems

The problem of the stability of the equilibrium positions and steady motions of holonomic conservative systems has been fairly completely treated in a number of reviews [44,58,9]. However, investigations are continuing in this field and a number of new important results have recently been obtained (in 1982–1992). This review analyses these results and compares them with previous ones.     

Flow-injection spectrophotometric determination of residual free chlorine and chloramine

2,4-Dinitrophenylhydrazine has been suggested as a new reagent for the flow-injection spectrophotometric determination of residual chlorine based on its oxidation to 2,4-dinitrophenyldiazonium ion. The measurement of the decrease in colour intensity under reversed flow-injection (reagent injection) conditions has been used for the determination of 0.1–10 mg/l Cl present as free or combined chlorine, and for its speciation. The limit of detection was 0.05 mg/l Cl. Copper (II), iron (III) and many other ions have been found not to vitiate the results.     

选择性远程DEPT~(13)C NMR新技术用于新阔叶千里光碱氮氧化合物的结构测定和谱峰归属研究

从湖北蟹甲草根茎中分得一个新的生物碱,选择性远程DEPT~(13)C NMR新技术用于识别NMR信号归属和连接被季碳及杂原子分割的质子自旋系统,确定其结构为新阔叶千里光碱的氮氧化物,如(1)所示。     

Moisture sorption, transport, and hydrolytic degradation in polylactide

Management of moisture penetration and hydrolytic degradation of polylactide (PLA) is extremely important during the manufacturing, shipping, storage, and end-use of PLA products. Moisture transport, crystallization, and degradation, in PLA have been measured through a variety of experimental techniques including size-exclusion chromatography, differential scanning calorimetry, and X-ray diffraction. Quartz crystal microbalance and dynamic vapor sorption experiments have also been used to measure moisture sorption isotherms in PLA films with varying crystallinity. A surprising result is that, within the accuracy of the experiments, crystalline and amorphous PLA films exhibit identical sorption isotherms.     

金属氧化物薄膜的多离子束反应共溅射模型(Ⅱ)——数值计算与结果讨论

结合实验中的工艺技术参数,以Pb,Ti两金属靶的反应共溅射为例,对我们提出的金属氧化物薄膜的多离子束反应共溅射模型进行数值计算,分别得出了各靶的溅射速率R,反应腔中反应气体分压p以及衬底Pb,Ti的金属单质和氧化物所占的有效面积百分比与反应共溅射中直接可调的物理量,即反应气体总量Q和溅射离子束流J的关系.计算结果表明,该模型揭示了反应溅射具有滞回效应的本质特征,反映了反应共溅射中相关参数的相互影响与相互耦合的特点,给出了薄膜中组分原子百分比及其氧化物的形态与溅射工艺的关系,指出了多离子束反应共溅射中稳恒溅 关键词：     

Comparative kinetics of phospholipase A2 action on liposomes and monolayers of phosphatidylcholine spread at the air-water interface

A detailed kinetic model describing the surface transformation of spread liposomes along with their enzymatic hydrolysis was developed. The model was applied to the hydrolysis of the long-chain phosphatidylcholine generating reaction products which remain at the interface and to medium-chain substrates from which the products desorb rapidly into the bulk phase. The overall kinetic constants of the hydrolysis in liposomal systems were compared with those obtained with monolayers under barostatic conditions. The values of the interfacial Michaelis-Menten constant were estimated.     

Methods of constructing optimal stabilizers

The problem of transforming a linear dynamical system in the neighbourhood of a state of equilibrium [1,2] is solved using the special problem of the damping of the system by controls of minimum intensity after a finite time interval. The possibility of using other problems of optimal control is discussed. The main attention is devoted to constructing algorithms of the operation of a device (a stabilizer) which is able, in real time, to generate a stabilizing control circulating in the closed optimal system when unknown perturbations operate constantly [3, 4]. The proposed method is based on the constructive theory of optimal control [5, 6]. Another form of this theory for solving the problem of stabilization is presented in [7](see also [8]).     

电子碰撞诱导原子从低激态向高激态弛豫

本文根据空心阴极放电中电子能量分布的物理图象,分析了原子从低激态向高激态弛豫的可能途径。建立高低激态集居数密度增量的关系。讨论高激态集居数密度增量获得可观量的条件。根据此条件分别选取钠原子的基态3s~2S_(1/2)和铜原子的亚稳态4s~2D_(3/2)为与激光共振的下能级,并激发具有较大自发发射几率的3s~2S_(1/2)→3p~2P°_(1/2)(和3p~2P°_(3/2))和4s~2D_(3/2)→4p~2P°_(1/2)跃迁,在远离上能级的高激态上观测到敏化荧光,并精确测得这些态的自发发射系数比值,而在更高激态上没有观测到敏化荧光,表明讨论中提出的条件是合理的。     

Conversion estimates for gas-solid reactions: Improved estimates for irreversible systems

Solid conversion has been of much interest to research workers and the Cumulative Gas Concentration Method (CGCM) has been developed to provide bounds for the reactant solid in irreversible systems having power-law type kinetics. This CGCM is used in conjunction with the Pseudo-Steady-State (PSS) assumption and these bounds appear to be good under certain conditions and for long times.

In this work, the PSS condition is not assumed when deriving the bounds on the cumulative gas concentration and the effect of the inclusion of the transient part is analysed. A technique, based on an iterative scheme incorporating the CGCM, is developed to provide improved estimates for the reactant solid.     

高纯金属镨中痕量稀土杂质的电感耦合等离子体原子发射光谱分析及光谱干扰的校正

本文提出了PGS-2型平面光栅光谱仪(色散率0.18纳米,二级光谱)与PlasmaTherm ICP-5000D射频发生器联用,乙醇预去溶方式进样,同时直接测定高纯金属镨中5个痕量稀土杂质元素的方法。并讨论了基体浓度对检出限的影响以及光谱干扰及其校正方法。当样品溶液中镨的浓度为5毫克/毫升时,测定下限分别为镧、钕和钐0.002%,铈0.003%和钇0.0005%。获得了良好的实验结果,其相对标准偏差为1.2-6.2%。