Self-gelatinizable copolymer immobilized glucose biosensor based on prussian blue modified graphite electrode

A novel poly(vinyl alcohol) grafting 4-vinylpyridine self-gelatinizable copolymer was adapted to immobilize glucose oxidase. The reduction of hydrogen peroxide (H2O2) was detected at a Prussian Blue (PB) modified graphite electrode. A stable and sensitive glucose amperometric biosensor is described. The copolymer is a good biocompatible polymer in which the glucose oxidase retains high activity. Moreover, the copolymer can adhere firmly to the inorganic PB membrane. The sensor showed an apparent Michaelis-Menten constant of 18 +/- 0.2 mM and a maximum current density of 1.14 microA cm-2 mM-1. The linear range is from 5 microM to 4.5 mM glucose and the detection limit is 0.5 microM glucose. The catalytic efficiency of PB for the reduction of H2O2 is higher than that for the oxidation of H2O2. Glucose concentrations in serum samples from healthy persons and diabetic patients were determined using the sensor. The results compared well with those provided by the hospital using a spectroscopy method.     

A New Approach to α—Bromochalcones

α-Bromo benzolymethylene triphenylphosphorane 3 has been synthesized by the reaction of benzoylmethylene triphenylphosphorane 1 with N-bromosuccinimide in the yield of 87% and can react with aromatic aldehydes 4 to give α-bromochalcones 5 in good yields.     

Synthesis and X-ray crystal structure of oxamido-bridged heterobinuclear Ni(Ⅱ)-Cu(Ⅱ) complexes

The two complexes [Ni(oxen)Cu(L)2](ClO4)2.xH2O (L=2,2'-bipyridyl(bpy), 1,10-phenanthroline(phen)) have been synthesized, where oxen is N,N'-bis(2-aminoethyl)oxamido di-anion. The crystal structure of [Ni(oxen)Cu(bpy)2](ClO4)2.CH3OH has been determined by X-ray diffraction method. The crystal is triclinic system, space group P1 with a=12.179(1),b=12.298(2), c=11.476(2) A, a=97.57(1), B=97.52(1), 7=80.29(2), V=1669.04(67) A3, Z=2, Dcalcd=1.667 g/cm3. The structure has been refined to final R of 0.076 and Rw of 0.080, respectively. The complexes have an extended oxamido-bridged structure and consist of Ni(Ⅱ) ion in a square planar environment and Cu(Ⅱ) ion in a distorted octahedral environment.     

Synthesis of (4S,9aS)-hexahydro-4-methyl-1H,5H-pyrrolo[2,1-c][1,4]-thiazepine-1,5-dione,A potent angiotensin converting enzyme inhibitor

Synthesis of (4S,9aS)-hexahydro-4-methyl-1H,5H-pyrrolo[2,1-c][1,4]thiazepine-1,5-dione, an orally active potent angiotensin converting enzyme inhibitor is described.     

Ring closure reaction of 4-(2-hydroxyanilino)-2-phenyl-5-pyrimidinecarboxylic acid with acetic anhydride. Synthesis of pyrimido[5,4-c] [1,5]benzoxazepin-5(11H)ones

Syntheses of 11-acety1-2-phenylpyrimido[5,4-c][1,5]benzoxazepin-5(11H)one ( 16a ) and analogs ( 16b,c, 22 ) were described. The reaction of 4-chloro-2-phenyl-5-pyrimidinecarboxylic acid ethyl ester ( 7 ) with 2-aminophenol afforded 4-(2-hydroxyanilino)-2-phenyl-5-pyrimidine-carboxylic acid ethyl ester ( 8a ). The latter was also prepared by catalytic reduction of 4-(2-nitrophenoxy)-2-phenyl-5-pyrimidinecarboxylic acid ethyl ester ( 9 ), which was obtained from 7 and 2-nitrophenol. Involvement of 4-(2-aminophenoxy)-2-phenyl-5-pyrimidinecarboxylic acid ethyl ester ( 12a ) in this reduction as an intermediate was demonstrated by an independent synthesis of 12a and its subsequent rearrangement to 8a. Hydrolysis of 8a or 12a gave 4-(2-hydroxyanilino)-2-phenyl-5-pyrimidinecarboxylic acid ( 15a ). Reaction of 15a with acetic anhydride afforded 16a , the first member of a novel ring system, the pyrimido[5,4- c ][1,5]-benzoxazepin. Additional examples ( 16b,c ) were prepared similarly. The corresponding 11-ethyl derivative ( 22 ) was prepared in similar fashion, starting with 7 and 2-ethylaminophenol. A possible reaction mechanism for the formation of 16a-c from 15a-c and acetic anhydride was discussed.     

Synthesis of 2-(α-Hydroxyalkyl)-2-Oxazoline under Microwave Irradiation in Bluk

Four 2-(α-hydroxyalkyl)-2-oxazolines and a 2-(α-hydroxy-α,α-diphenyl)-2-benzooxazole were synthesized from β-amimoalcohols and α-hydroxy carboxylic acids under microwave irradiation in the absence of a solvent.     

A nafion/crown ether film electrode and its application in the anodic stripping voltammetric determination of traces of silver

Glassy carbon electrodes are modified by coating with dicyclohexyl-18-crown-6 in Nafion-117. The electrode is used for a very sensitive anodic stripping voltammetric determination of silver. High sensitivity is obtained owing to the release of crown molecules from the silver-crown complex during the deposition. The detection limit is 2×10^?12 M after electrodeposition for 30 min. The recommended supporting electrolyte is 4×10^?3–7×10^?3 M potassium chloride in 0.01 M nitric acid with a deposition potential of ?0.30 V vs. SCE and a linear potential scan. Three typical calibration graphs were linear over the range 2×10^?11–1×10^?8 M for deposition times of 30, 20 and 8 min, respectively. The silver content of reagent-grade ammonium nitrate was found to be 0.48×10^?4% with a relative standard deviation of 3.7% (n=7) for parallel determinations.     

Direct STM investigation of cinchona alkaloid adsorption on Cu(III)

Scanning tunneling microscopy (STM) combined with cyclic voltammetry has been employed to investigate the adsorption of cinchonine on Cu(111). Similar to cinchonidine, cinchonine forms a long-range ordered adlayer with (4 x 4) symmetry on the substrate. The structural details on molecular adsorption were obtained by high-resolution STM images. On the basis of the previous results and obtained STM images, the quinoline ring is proposed to lie parallel to Cu(111) and serve as an anchoring group. The chiral quinuclidine moiety extends out of the surface to facilitate the interaction with the prochiral reactants.     

Room temperature oxidation of lead-indium alloy films

The kinetics of growth of thin (14 to 40Å) oxide layers on lead-indium alloys was investigated ellipsometrically, using: 3000Å thick films at 23°C; and oxygen exposures at 760 torr for times ranging from five minutes to five days. Assuming that the oxide layer is comprised of a two-phase mixture of PbO and In₂O₃ having a negligible extinction coefficient made it possible to estimate the oxide composition from the ellipsometrically-obtained oxide refractive index. Under these oxidizing conditions, the volume fraction of PbO in the oxide mixture decreases from a value of unity for pure lead to zero for alloys containing more than 30 at. percent In, in agreement with the Auger Electron Spectroscopy results of Chou and coworkers. The oxidation rate equals a exp (X₁/X), where α and X₁ will be seen to vary complexly with alloy composition. A theoretical explanation of these results is also presented.