Five new optimal ternary linear codes

Optimal ternary linear codes with parameters [29,5,18], [34,5,21], [43,5,27], [61,5,39], and [31,6,18] have been found. Codes with these parameters were not known until now     

Dielectric measurements using a rational function model

A recently proposed rational function model for the aperture admittance of 50 ohm Teflon filled coaxial lines in contact with a homogeneous dielectric is experimentally validated. A calibration technique of the automatic network analyzer utilizing standard terminations and time domain gating is used. Uncertainties in the dielectric properties of reference liquids do not enter the calibration procedure. Experimental results for water and methanol are compared with estimated values. A model expression for the sensitivity of the probe is validated. The sensitivities of two coaxial line probes for the measurements made are determined. Results obtained using the new model are compared with those of other workers     

An implementation of the vectorial finite element analysis ofanisotropic waveguides through a general-purpose PDE software

This paper reports on the major progress in the development of an intelligent, interactive and automated system, based on the vector finite element method, and implemented within PDE/Protran problem solving environment. The system is known as WAVEGIDE and was originally developed by the authors for an efficient solution of inhomogeneous dielectric waveguides. In this paper, it has been further extended to the solution of anisotropic waveguiding structures. With our system, through an interactive “question-and-answer” session, which requires minimal knowledge of programming, the problem can be defined using high level PDE/Protran commands. It can then be simply and quickly solved by the main processor within this intelligent environment. To verify the convergence and accuracy of the present approach, numerical results (with respect to the grid density and element order) for a rectangular metallic waveguide half filled with dielectric are given and compared with other finite element methods. Numerical results for an anisotropic dielectric rectangular waveguide are also presented. These results clearly illustrate the accuracy and the ease of use of the modified WAVEGIDE program     

FDTD simulation of microwave sintering of ceramics in multimodecavities

Microwave sintering of ceramics in multimode cavities, particularly the use of picket-fence arrangements, has recently received considerable attention. Various types of ceramics have been successfully sintered and, in some cases, a desirable and unique “microwave effect” has been observed. At present, various aspects of the sintering profess such as preparation of sample sizes and shapes, types of insulations, and the desirability of including a process stimulus such as SiC rods are considered forms of art and highly dependent on human expertise. The simulation of realistic sintering experiments in a multimode cavity may provide an improved understanding of critical parameters involved and allow for the development of guidelines towards the optimization of the sintering process. In this paper, we utilize the FDTD technique to model various geometrical arrangements and material compatibility aspects in multimode microwave cavities and to simulate realistic sintering experiments. The FDTD procedure starts with the simulation of a field distribution in multimode microwave cavities that resembles a set of measured data using liquid crystal sheets. Also included in the simulation is the waveguide feed as well as a ceramic loading plate placed at the base of the cavity     

The effect of compensating faults models on NMR system reliability

Realistic estimates of the reliability of systems with N-tuple modular redundancy (NMR), must consider the effect of compensation of logic faults. Earlier analyses that include compensating faults are impractical to use, yield very complex mathematical formulas for reliability indices, and/or concern the simplest triple modular redundancy (TMR) system only. This paper gives a general approach to the problem. Two models of compensating faults are considered. For either model the lower and upper bounds on frequency of compensating faults are found. By applying some results of NMR system evaluation, the new estimates of upper and lower bounds of NMR system reliability with respect to compensating faults are derived. A simple algebraic form of the final results makes them useful     

Two's complement quantization in orthogonal biquad digital filters

A special class of complex biquad digital filters called orthogonal filters are investigated for stability under two's complement quantization. A sufficient condition is derived for the asymptotic stability of the nonlinear filter. Bounds on the possible limit cycles are also obtained. Using these bounds, any given filter can be tested for stability. The stability triangle is then scanned using a dense grid, and each point on the grid is tested for stability/limit cycles. By this method, the stability region given by the sufficient condition is extended. Regions within the linear stability triangle where various types of limit cycles are possible are also identified.     

Solution of nonlinear kinematics of a parallel-link constrained Stewart platform manipulator

The Stewart platform manipulator is a fully parallel kinematic linkage system that has great advantages over typical serial link robots. However, one major problem in controlling this kind of manipulator is that, due to its closed kinematic chain and parallel-link constrained structure, it is impossible to derive an explicit kinematic solution. This paper proposes a simplified algorithm to numerically solve the forward kinematics of a six-links Stewart platform. Taking advantage of some fundamental geometric operations, the proposed algorithm involves only 3 nonlinear simultaneous equations. The explicit expressions are derived for some special configurations which can directly give the geometric limitations to motion in terms of the geometric dimensions of the platforms and the legs.Research was supported by Texas Advanced Technology program under grant 003656-008 and National Science Foundation under grant MSS9211970.     

Understanding the role of self-esteem in managing communicationquality

This paper presents an overview of the ways in which self-esteem operates in employee communication. As they develop effective communication skills, managers need to consider the consequence of stress on employee self-esteem and performance. Persons with high self-esteem are less likely to experience workplace demands as stressful and are better able to respond effectively to those demands. This paper discusses the relationship among self-esteem, occupational stress, and communication quality, then recommends ways in which self-esteem can be enhanced through employee communication     

The special section on professional communication in Russia: anAmerican perspective

Enormous changes that have taken place in the last few years in Russia have revealed a need for Russian technical communicators to refocus their expertise and skills in order to enter the global marketplace successfully and competitively. Rather than dwell on the familiar differences between Americans and Russians, Cold War adversaries, a common ground exists and is growing. We share a mutual interest in the successful entry of Russian technical communicators in the global marketplace. We also share an understanding that technology is central to civilization as we know it, and that the masters of technology have a substantial influence on all activities that they touch; a belief that technology has had a major beneficial effect on the peoples of the world, but that with such power comes the potential for large, serious, and potentially devastating influences; the idea that the embrace of technology is a good cultural fit with cultures formed from revolutions, for technology in the later part of this century has come to be synonymous with rapid change, and cultures with revolutionary heritage welcome change; the notion that technological breakthroughs have profound influences on the nature of work, liberating the traditional intensive physical nature of labor to the emergence of a knowledge worker; and the belief that the global marketplace forces the need for clear and rapid communication across borders, as well as among cultures. If we can agree on these technical communications issues, then we have a firm foundation for building a gateway to communication in the global market     

Describing collaborative forms: a profile of the team-writingprocess

The paper examines collaborative writing practices students in the Air Force Institute of Technology's Graduate School of Logistics and Acquisition Management use to produce team-authored theses. In analyzing how student writing teams plan, execute, and assess writing activities, the researchers identify and describe some of the forms that collaboration takes, thereby successfully connecting their work within a broader research continuum concerning collaborative writing, particularly when applied in academic settings