Hybrid cam mechanisms

This paper investigates the problem of driving a machine with several reciprocating heavy inertias. The drive should also realize some programmable flexibility of the motion, so that the operation of the machine, e,g., synchronization between different motions and duration of standstills, can easily be modified. The use of a single servomotor for every motion is not the best solution, since it does not allow for energy recuperation. This means that the installed servomotor power will be much higher than the required net peak power for the machine as a whole. The presented solution, however, reduces the servomotor peak torque and power by one order of magnitude, and makes energy transfer between the motions possible. The hybrid cam mechanism consists of a hybrid drive, which is a combination of a servomotor, a constant velocity motor and a cam follower mechanism. The operation principle exploits the nonlinear characteristics of the cam to add flexibility at low cost of energy. The hybrid solution is particularly successful for motions involving high peak acceleration. In addition, the concept can be used to reject disturbances. Simulations show the performance of the hybrid cam mechanism.     

GaInP/GaAs HBTs for high-speed integrated circuit applications

The use of GaInP/GaAs heterojunction bipolar transistors (HBTs) for integrated circuit applications is demonstrated. The discrete devices fabricated showed excellent DC characteristics with low V_ce offset voltage and very low temperature sensitivity of the current gain. For a non-self-aligned device with a 3-μm×1.4-μm emitter area, f_T was extrapolated to 45 GHz and f_max was extrapolated to 70 GHz. The measured 1/f noise level was 20 dB better than that of AlGaAs HBTs and comparable to that of low-noise silicon bipolar junction transistors, and the noise bump (Lorentzian component) was not observed. The fabricated gain block circuits showed 8.5 dB gain with a 3-dB bandwidth of 12 GHz, and static frequency dividers (divide by 4) were operable up to 8 GHz     

Absorptive corrections to structure functions at small-x

The role of corrections due to the interactions between different branches of parton (gluon) cascades is studied. It is shown that at HERA energies these interactions increase the absorptive (two-Pomeron cut) contributions by about 60 to 80% compared with the Gribov-Levin-Ryskin equation.This work was supported, in part, by a Soros Foundation Grant awarded by the American Physical Society     

Color quantitation through image processing in dermatology

Classical color models and their applications to computer vision are reviewed. The performances of color quantitation from digitized images are compared with those derived from a chromameter. The color quantitation obtained from either digitized color slides or directly digitized images is proved to be more efficient than the conventional visual assessment of observers. A methodology is proposed for determining the specific color indices which are needed in dermatology. An application of this methodology is developed for designing a blanching quantitation index in order to replace the visual assessment during McKenzie tests.     

Nonclassical states generated via four-wave mixing

The nonclassical properties of quantum fields generated by four- or three-wave mixing are investigated on the basis of assumptions of two-photon coherent (squeezed) input states and the approximation of strong pumping. The influence of losses is shown supposing the model of mutually independent phonon reservoirs. The possibility of producing squeezed and sub-Poisson light outputs is demonstrated in single or superposed modes using computer solutions.The author wishes to acknowledge helpful discussions with Dr. J. Peina and Dr. M. Kárská.     

Effect of multijunction grill length on its lower hybrid current drive efficiency

The distance between the junction of subsidiary waveguides in the main waveguide and the grill mouth has an important influence upon the spectrum of radiated waves, the total reflection coefficient, the power distribution among the separate waveguides and the actual phases of incident waves. This effect is nearly as important as that of the phase shift between the adjacent waveguides and it is necessary to carry out optimization with respect to this parameter in the grill design.     

Optical constants of titanium and silicon dioxide films

In this paper a study of optical constants of titanium and silicon dioxide films prepared in Balzers BAK 600 and BA 510 conventional high-vacuum apparatus is described. Both the dispersion and the geometrical thickness were determined from normal reflectance spectrum by adapted general algorithm of the statistical interpretation of measured data. The dependence of optical constants on oxygen pressure for both materials and the evaporation rate dependence for titanium dioxide were obtained. The time changes of these constants were also measured.     

Theoretical basis for controlling minimal tumor temperature duringinterstitial conductive heat therapy

This paper describes simulation of steady-state intratumoral temperatures achieved by a simple modality of local heat therapy: interstitial treatment with parallel arrays of warmed, conductive heating elements. During "conductive heating" power is directly deposited only in the interstitial probes. Adjacent tissue is warmed by heat conduction. Simulations of interstitial conductive heating involved solution of the bioheat transfer equation on a digital computer using a finite difference model of the treated tissue. The simulations suggest that when the complete temperature distributions for conductive interstitial hyperthermia are examined in detail, substantial uniformity of the temperature distributions is evident. Except for a thin sleeve of tissue surrounding each heating element, a broad, flat central valley of temperature elevation is achieved, with a well defined minimum temperature, very close to modal and median tissue temperatures. Because probes are inserted directly in tumor tissue, the thin sleeve of overheated tissue would not be expected to cause normal tissue complications. The temperature of the heated probes must be continuously controlled and increased in the face of increased blood flow in order to maintain minimum tumor temperature. However, correction for changes in blood flow is possible by adjusting probe temperature according to a feedback control scheme, in which power dissipation from each probe is the sensed input variable. Conductive interstitial heating with continually controlled probe temperature deserves investigation as a technique for local hyperthermia therapy.     

Low energy restrictions for a flipped left-right symmetric model

I consider some low energy restrictions for a “flipped” left-right symmetric model containing exotic fermions ofE ₆ and a right-handedW-boson, all with oddR-parity. The new interactions due toW _R-exchange have no significant impact on rare kaon decays, because theW _R does not couple tod,s,b quarks. On the other hand,W _R exchanges might induce rare processes like \(D - \bar D\) mixing, \(D^0 \to \mu \bar \mu ,D^0 \to \mu \bar e,\mu \to e\gamma ,\mu \to 3e\) , and μN→eN. It turns out that the strongest bound is obtained from \(D - \bar D\) mixing. With reasonable extra assumptions, it is found that the exotic right-handed W-boson is likely to be heavier than 500 to 1500 GeV.     

The effective action of a spin 1/2 field in the background of a nontopological soliton

We generalize a new method of calculating the effective action for fields in a spherically symmetric background to the case of a spin 1/2 field whose mass is a function ofr=|x|, as it is the case in the nontopological soliton model of Friedberg and Lee. The quantum corrections to the soliton energy are sizeable, of the same order as the bound state energies that stabilize the soliton.