50 years of the IEEE Microwave Theory and Techniques Society

The early history of the IEEE Microwave Theory and Techniques Society (IEEE MTT-S) is summarized since its founding in 1952, and all administrative committee members and presidents are listed. Some of the more recent changes resulting from growth and multinational participation are described. Publications are discussed with editors listed for this Transactions, the IEEE Microwave and Wireless Components Letters, the IEEE Microwave Newsletter, and IEEE Microwave Magazine. The chronological evolution of the IEEE MTT-S's awards is presented, including a listing of all award winners. Distinguished lecturers and microwave symposia sites and chairpersons are also discussed. Early technology trends are described     

High-frequency small signal AC and noise modeling of MOSFETs for RFIC design

High-frequency (HF) AC and noise modeling of MOSFETs for radio frequency (RF) integrated circuit (IC) design is discussed. A subcircuit RF model incorporating the HF effects of parasitics is presented. This model is compared with the measured data for both y parameter and f_T characteristics. Good model accuracy is achieved against measurements for a 0.25 μm RF CMOS technology. The HF noise predictivity of the model is also examined with measured data. Furthermore, a methodology to extract the channel thermal noise of MOSFETs from HF noise measurements is presented. By using the extracted channel thermal noise, any thermal noise models can be verified directly. Several noise models including the RF model discussed in this paper have been examined, and the results show that the RF model can predict the channel thermal noise better than the other models     

Retrievals of column water vapor using millimeter-wave radiometric measurements

The airborne Millimeter-wave Imaging Radiometer (MIR) measurements conducted over the Midwest region of the continental United States during January/February 1997 and over the Alaska-Arctic region during May 1998 are used to estimate column water vapor W<0.8 g/cm/sup 2/ under a clear sky. On board the same aircraft are two other instruments, the Cloud Lidar System (CLS) and MODerate-resolution Imaging Spectrometer (MODIS) Airborne Simulator (MAS), which provide cloud cover information and independent measurements of W, respectively. The MIR-estimated W values are compared and found to be in very good agreement with those measured by rawinsondes at near concurrence. A close correlation is found between the MIR-estimated W and that estimated from the MAS near-IR reflectance ratios. Water surface emissivities at several MIR frequencies are obtained in the process of the W retrieval from several flights over the Midwest lakes. These estimated emissivities compared favorably with values calculated for a calm water surface, which are based on a di-electric permittivity model and MAS-measured surface temperatures. The results from all comparisons strongly demonstrate the soundness of the technique for estimating W.     

Electromigration-induced damage in bamboo Al interconnects

Depletion and hillock formation were examined in-situ in a scanning electron microscope (SEM) during electromigration of bamboo Al interconnect segments. Hillocks formed directly at the anode ends of the segments by epitaxial addition of Al at the bottom Al/TiN interface. Depletion occurred nonuniformly from the cathode end and stopped once the distance between the leading void and the hillock reached the critical length for electromigration at the given current density. A modified equation for the drift velocity is proposed, which includes the effect of nonuniform depletion and predicts that interconnects with nonuniform depletion are more reliable than those with uniform depletion.     

The strategy of edge wear prediction in CIM concept

A monitoring of tool wear in different cutting operations has been studied for many years. Special techniques have been used to detect a wear status basing upon cutting forces, acoustic emission, temperature, torque and power, vibration, noise and acceleration sensors. The adapting of a proper prediction method allows to solve problems of an automatic supervision in Computer Integrated Manufacturing systems. A task of the abrasive edge wear index prediction can be formulated as follows: disposing by the data collection of the edge wear status in a time period preceding the concerning the wear status in the successive time period embraced by the prediction method.     

Densification involved in the UV-based photosensitivity of silicaglasses and optical fibers

A comprehensive survey of photosensitivity in silica glasses and optical fiber is reviewed. Recent work on understanding the mechanisms contributing to germanium or aluminum doped fiber photosensitivity is discussed within the framework of photoelastic densification models     

A wafer level monitoring method for plasma-charging damage usingantenna PMOSFET test structure

A novel monitoring method for plasma-charging damage is proposed. This method performs a quick and accurate evaluation using antenna PMOSFET. It was found that not only hot-carrier (HC) lifetime but transistor parameters such as initial gate current and substrate current were changed according to the degree of plasma-charging damage. However, the present work suggests that monitoring the shift of drain current after a few seconds of HC stress is a more accurate method to indicate plasma-charging damage. The monitoring method using the present test structure is demonstrated to be useful for realizing highly reliable devices     

Determinants of national media attention

This study employed two perspectives to investigate media attention given women congressional candidates. The first perspective is that media attention may be explained by typical and normal media processes, such as focusing on incumbents. The second perspective considers a partisan explanation in which media attention is weighted more to Democratic candidates than Republican candidates. This study employs two established sources, Vanderbilt's Television News Index and Abstract and Information Access's National Newspaper Index , to examine the national media attention of Democratic and Republican women congressional candidates in 1990 and 1992. The investigation determined that media attention is related to whether the candidates are running for the Senate or House, incumbency, and state population. The results also reveal that party is a statistically significant factor associated with media attention. The investigation also determined that ethnic candidates tend to receive slightly less attention from the print media than nonethnic candidates.     

Four-channel polarization-insensitive optically transparent wavelength converter

Multichannel wavelength converters may be important components in the cross-connects in future wavelength-division multiplexed (WDM) transport networks. We demonstrate a multichannel, polarization-insensitive, optically transparent wavelength converter, based on four-wave mixing in two semiconductor optical amplifiers in a polarization-diversity arrangement. Bit-error-rate (BER) measurements with four input 2.5-Gb/s WDM channels, spaced by 2 nm, show penalties for wavelength conversion less than 2.6 dB at 10/sup -9/ BER. Changes in the state of polarization of the input signals cause the output power to change by less than 1.2 dB, and the corresponding power penalties change by less than 0.9 dB.     

Wavelength selection for low-saturation pulse oximetry

Conventional pulse oximeters are accurate at high oxygen saturation under a variety of physiological conditions but show worsening accuracy at lower saturation (below 70%). Numerical modeling suggests that sensors fabricated with 735 and 890 nm emitters should read more accurately at low saturation under a variety of conditions than sensors made with conventionally used 660 and 900 nm band emitters. Recent animal testing confirms this expectation. It is postulated that the most repeatable and stable accuracy of the pulse oximeter occurs when the fractional change in photon path lengths due to perturbations in the tissue (relative to the conditions present during system calibration) is equivalent at the two wavelengths. Additionally, the penetration depth (and/or breadth) of the probing light needs to be well matched at the two wavelengths in order to minimize the effects of tissue heterogeneity. At high saturation these conditions are optimally met with 660 and 900 nm band emitters, while at low saturation 735 and 890 nm provide better performance