A co‐ordinate system independent streamwise upwind method for fluid flow computation

A new co‐ordinate invariant streamwise upwind formulation for convection dominated flows is developed. The eddy diffusivity/viscosity is added directly to the equations in order to remove the oscillations in the solution. The equations then can be solved by any high‐order scheme and the solution retains the accuracy of the high‐order scheme. The accuracy and reduced lateral thickness growth rate are demonstrated with several numerical examples, including pure convective flows and lid‐driven cavity flow. The lateral spreading due to the numerical diffusion is controlled by the anisotropic tensor. Copyright © 2004 John Wiley & Sons, Ltd.     

Inviscid,laminar and turbulent opposed flows

This paper attempts to reproduce numerically previous experimental findings with opposed flows and extends their range to quantify the effects of upstream pipes and nozzles with inviscid, laminar and turbulent flows. The choice of conservation equations, boundary conditions, algorithms for their solution, the degree of grid dependence, numerical diffusion and the validity of numerical approximations are justified with supporting calculations where necessary. The results of all calculations on the stagnation plane show maximum strain rates close to the annular exit from the nozzles and pipes for lower separations and it can be expected that corresponding reacting flows will tend to extinguish in this region with the extinction moving towards the axis. With laminar flows, the maximum strain rate increased with Reynolds number and the maximum values were generally greater than with inviscid flows and smaller than with turbulent flows. With large separations, the strain rates varied less and this explains some results with reacting flows where the extinction appeared to begin on the axis. The turbulent‐flow calculations allowed comparison of three common variants of a two‐equation first‐moment closure. They provided reasonable and useful indications of strain rates but none correctly represented the rms of velocity fluctuations on the axis and close to the stagnation plane. As expected, those designed to deal with this problem produced results in better agreement with experiment but were still imperfect. Copyright © 2004 John Wiley & Sons, Ltd.     

Model based online diagnosis of unbalance and transverse fatigue crack in rotor systems

A model based technique for online identification of malfunctions in rotor systems is discussed. Presence of fault changes the dynamic behavior of the system. This change is taken into account by equivalent loads acting on the undamaged system model. Equivalent loads are fictitious forces and moments acting on the undamaged system model, which generate a dynamic behavior identical to that of the real damaged system. The mathematical representation of equivalent loads is referred to as Fault Model. The work focuses on developing a fault model for a transverse fatigue crack in shaft and testing it through simulated studies. The basic principle of the technique is validated for unbalance identification, through numerical simulations as well as by experiments on a real rotor system.     

Oblique-basis shell-model calculations

A one-dimensional harmonic oscillator in a box is used to introduce the oblique-basis concept. The method is extended to the nuclear shell model by combining traditional spherical shell model states, which yield a diagonal representation of the usual single-particle interaction, with SU(3) shell model collective configurations that track deformation. An application to ²⁴Mg, using the realistic two-body interaction of Wildenthal, is used to explore the validity of this mixed-mode shell-model scheme. The theory is also applied to lower pf-shell nuclei, ^44–48Ti and ⁴⁸Cr, using the Kuo-Brown-3 interaction. These nuclei show strong SU(3) symmetry breaking due mainly to the single-particle spin-orbit splitting. Nevertheless, the results also show that yrast band B(E2) values are insensitive to fragmentation of SU(3) symmetry. Specifically, the quadrupole collectivity as measured by B(E2) strengths remains high even though the SU(3) symmetry is rather badly broken. The results suggest that an oblique-basis mixed-mode shell-model theory may be useful in situations where competing degrees of freedom dominate the dynamics.     

Low-threshold interband cascade lasers operating above room temperature

Mid-IR type-II interband cascade lasers were demonstrated in pulsed mode at temperatures up to 325 K and in continuous mode up to 200 K. At 80 K, the threshold current density was 8.9 A/cm² and a continuous wave output power of 140 mW/facet was obtained.     

1,1‐Organoboration of bis(trimethylstannyl)ethyne with trimethylsilyl‐ and dimethylsilyl‐dialkylboryl‐substituted alkenes: organometallic‐substituted allenes

The reactions of bis(trimethylstannyl)ethyne, Me₃Sn–C?C–SnMe₃ ( 4 ), with trimethylsilyl‐ or dimethylsilyl‐dialkylboryl‐substituted alkenes 1 – 3 afford organometallic‐substituted allenes 5 , 6 and 8 , 9 in high yield. In the case of (E)‐2‐trimethylsilyl‐3‐diethylboryl‐2‐pentene ( 1) , a butadiene derivative 7 could be detected as an intermediate prior to rearrangement into the allene. All reactions were monitored by ²⁹Si and ¹¹⁹Sn NMR, and the products were characterized by an extensive NMR data set (¹H, ¹¹B, ¹³C, ²⁹Si, ¹¹⁹Sn NMR). Copyright © 2003 John Wiley & Sons, Ltd.     

Dual band-notched ultra-wideband microstrip antenna using asymmetrical spurlines

A simple and novel ultra-wideband microstrip-fed antenna with dual band-notched characteristic is presented. By etching a pair of asymmetrical spurlines on the feedline, two notched bands of 600 MHz (3.95? 4.55 GHz) and 650 MHz (5.35?6.0 GHz) are achieved. Measured results show that this antenna operates from 2.5 to 12.0 GHz for voltage standing wave ratio less than 2, except two frequency notched bands of 3.95?4.55 GHz and 5.35?6.0 GHz. Moreover, this antenna has good omnidirectional radiation patterns in the H-plane.     

Structure theorem for tournaments omitting N5

A finite tournament T is tight if the class of finite tournaments omitting T is well‐quasi‐ordered. We show here that a certain tournament N₅ on five vertices is tight. This is one of the main steps in an exact classification of the tight tournaments, as explained in [10]; the third and final step is carried out in [11]. The proof involves an encoding of the indecomposable tournaments omitting N₅ by a finite alphabet, followed by an application of Kruskal's Tree Theorem. This problem arises in model theory and in computational complexity in a more general form, which remains open: the problem is to give an effective criterion for a finite set {T₁,…,T_k} of finite tournaments to be tight in the sense that the class of all finite tournaments omitting each of T₁,…,T_k is well‐quasi‐ordered. © 2003 Wiley Periodicals, Inc. J Graph Theory 42: 165–192, 2003