Theory of soliton stability in asynchronous modelocking

A new type of fiber laser modelocking is examined where a phase modulator is driven asynchronously with respect to a harmonic of the roundtrip cavity frequency. An asynchronous drive is able to produce high repetition rate (>1 GHz) soliton pulses that are shorter than the classic, active modelocking pulse width limit. It is shown that with a proper choice of fiber parameters, noise cleanup and soliton pulse shaping can be obtained using filtering and asynchronous phase modulation. Limits of asynchronous detuning are derived and a comparison with the parameters ranges for synchronous phase modulation is also presented     

Film morphology and reaction rate for the CVD of tungsten by the WF6—SiH4 reaction

Journal of Electronic Materials - Low pressure chemical vapor deposition (LPCVD) of tungsten (W) by SiH4 reduction of WF6 on Si(100) surfaces was studied in a single-wafer, cold-wall reactor over a...     

Self-calibration techniques for a second-order multibit sigma-deltamodulator

Design techniques for self-calibration of the digital-to-analog converter DAC in a multibit sigma-delta modulator are described. When used in conjunction with dynamic element matching, self-calibration provides linearity performance suitable for digital audio applications. The dynamic element matching circuitry provides the mechanism of determining device mismatch for self-calibration. Practical circuit details and an effective calibration method are discussed. Test results from a l-μm CMOS test chip are presented. In this test system, a second-order loop with a 3-b quantizer achieves an 89-dB dynamic range and -91-dB harmonic distortion after calibration. In addition, a new method of detecting the presence of tones is described, using the entropy of the spectrum of the decimation filter output     

A 3-D sidewall flash EPROM cell and memory array

A new 3-D sidewall flash EPROM cell has been implemented in a novel memory array. The sidewall cell is a single-transistor stacked gate cell built on the sidewalls of a silicon pillar. The gates surround the pillar and current flows vertically from top to bottom of the pillar. The cell size approaches the square of the minimum pitch and is less than 40% of that of the conventional NOR-type structure. The cell and array architecture promise to be highly scalable     

Electroluminescence from phenylenevinylene-based polymer blends

The electroluminescent behaviour of films of poly(phenylphenylenevinylene) (PPPV), of PPPV blended with polystyrene (PS) and of PS doped with oligo(phenylenevinylene) sandwiched between indium–tin oxide (ITO) and Al contacts has been investigated. Polymer blending increases the relative quantum efficiency by up to two orders of magnitude. Studying the cell performance under application of rectangular voltage pulses as a function of temperature indicates that (i) hole injection at the ITO contact occurs by tunnelling, (ii) tunnel injection of electrons at the cathode is promoted by a space charge field across an interfacial Al₂O₃ layers and (iii) leakage of holes through the cathodic barrier is the main loss mechanism for holes.     

Trimode ladar/radar transponder systems for tracking long range cooperative targets

Detection and tracking of cooperative airborne targets are very important for military and also for civilian purposes. Previous research has shown that detection and tracking LASER offer high precision but their operation range is limited to less than 40 km even in good visibility propagation conditions. For long operation ranges, high power and bulky RADAR are required which can be significantly reduced by using active transponders on the cooperative target. A trimode LADAR/RADAR/Transponder system is investigated providing optimum performances. A L band Radar with active transponder is operated for all weather long ranges up to Low Earth Orbit satellites. The L mode is switched to a Mm wave mode RADAR for operation distances lower than 350 km and to an accurate LASER mode for the final tracking steps.     

WIPL: a program for electromagnetic modeling of composite-wire andplate structures

WIPL is a program which allows fast and accurate analysis of antennas. The geometry of any metallic structure (even a very large structure) is defined as a combination of wires and plates. WIPL's analysis features include evaluations of the current distribution, near and far field, and impedance, admittance and s-parameters. The program uses an entire-domain Galerkin method. Efficiency of the program is based on the flexible geometrical model, and sophisticated basis functions. In this paper, the basic theory implemented in the program, and some results concerning TV UHF panel antennas and large horn antennas are given     

A method for investigating the orientational behaviour of fibrous particles in gaseous flow

A method is described by which the angular orientation distribution of fibrous particles carried in a gaseous stream may be investigated. The method is based upon the interpretation of the spatial intensity distribution or scattering profile of laser light scattered by individual fibres. The scattering instrument used to capture the profiles is described, and the mathematical computation required to ascertain the orientation of each particle at the measurement point is detailed. Illustrative results are given for a study of airborne micromachined silicon particles of 12 μm length and 1.0 μm by 1.5 μm cross-section. The method is currently being employed by the authors to investigate ways of improving the orientation control over nonspherical particles in systems such as aerodynamic particle sizers and particle shape classifiers, since lack of particle orientation control is known to adversely affect the measurement accuracy of both these types of instrument.     

The decay of theτ lepton to six pions

We present the branching ratio predictions of an isospin statistical model forτ decays to four, five and six pions. Limits on the branching ratios of the three possible six pionτ decay modes using the Conserved Vector Current (CVC) Hypothesis and thee ⁺ e ^?→6π cross section data are also presented. We find that the isospin model prediction is in good agreement with the well-measured four pion decay modes and consistent with the five pion decay modes. However, we find that some of the recent six pionτ measurements do not agree with the isospin model and the CVC prediction.     

Isomer effects on transport properties of polyesters based on bisphenol-A

Pure gas sorption and transport properties of polyesters based on bisphenol-A and both pure isophthalic and pure terephthalic acid chloride were obtained for He, N₂, O₂, CH₄, and CO₂ at 35°C. The polymers were synthesized in our laboratory and amorphous films were prepared with a specialized solvent casting procedure. The polymer containing m-phenylene groups shows higher permselectivity for most of the gas pairs. The ideal selectivity of O₂/N₂ was increased by 33% when p-phenylene units were replaced by m-phenylene ones. On the other hand, the polyester containing only p-phenylene groups, shows higher permeability to all the gases studied. The polymer based on pure terephthalic acid chloride has a 75% higher oxygen permeability and a 1.1-fold higher carbon dioxide permeability than the isophthalic acid derivative. The polyester containing meta-phenylene units has lower T_g, higher permselectivity, lower permeability, lower fractional free volume (FFV), and lower d-spacing. The values of FFV, and lower d-spacing. The values of FFV and d-spacing were only slightly different between the two isomers. Moreover, for the sub-T_gγ transition the maximum in tan δ occured at essentially the same temperature (?55°C). The polymer with a higher concentration of p-phenylene units shows somewhat larger area under the γ-peak, indicating slightly more sub-T_g motion. The Distribution of FFV is considered to be the determining factor for the differences in transport properties observed. © 1993 John Wiley & Sons, Inc.