On theL p-bounds for maximal functions associated to convex bodies inR n

The dimension-freeL ²-maximal inequality for convex symmetric bodies obtained in [2] is extended forp>3/2.     

A series active power filter based on a sinusoidalcurrent-controlled voltage-source inverter

A series active power filter working as a sinusoidal current source, in-phase with the mains voltage, has been developed and tested. The amplitude of the fundamental current in the series filter is controlled through the error signal generated between the load voltage and a pre-established reference. The control allows an effective correction of power factor, harmonic distortion and load voltage regulation. Compared with previous methods of control developed for series active filters, this method is simpler to implement because it is only required to generate a sinusoidal current, in-phase with the mains voltage, the amplitude of which is controlled through the error in the load voltage. The proposed system has been studied analytically and tested using computer simulations and experiments. In the experiments, it has been verified that the filter keeps the line current almost sinusoidal and in-phase with the line voltage supply. It also responds very quickly under sudden changes in load conditions, reaching its steady-state in about two cycles of the fundamental     

Monte Carlo simulations of homogeneous upconversion in erbium-dopedsilica glasses

Quenching of Er³⁺ ions by homogeneous energy-transfer upconversion in high-concentration erbium-doped silica glasses has been theoretically investigated, The results indicate that at Er³⁺ concentrations of 1.0-2.0·10²⁶ m^-3 or below, the kinetic limit of strong migration is not reached, and hence the widely accepted quadratic upconversion model is not generally valid. Nevertheless, the results offer an explanation of the experimental observations of quadratic upconversion. Furthermore, it has been shown that at a given population inversion, the quenching rate depends on the rate of exchange of the excited Er³⁺ ions by emission and absorption     

Measurement of PLL phase error caused by power supply noise

The measurement of the accumulated phase error of phase-locked loops (PLLs) in microprocessor systems is discussed. A system which creates controlled power supply noise and measures the PLL response is described. Examples of the use of this technique are shown for a PLL used in a 400 MHz microprocessor     

Optical detection of NO3 and NO2 in “pure” HNO3 vapor,the liquid-phase decomposition of HNO3

Flowing and static gas-phase samples of HNO₃ in O₂ and N₂ were analyzed by long-path ultraviolet/visible (UV/VIS) spectroscopy to reveal the presence of both NO₂ and NO₃, the concentrations of which were calculated using differential absorption cross sections. NO₂ is produced predominantly by the heterogeneous decomposition of HNO₃, whereas NO₃ is generated in the gas phase by the thermal decomposition of N₂O₅, a product of the self-disproportionation of liquid HNO₃. © 1993 John Wiley & Sons, Inc.     

Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Electrical coupling and impulse propagation in anatomically modeledventricular tissue

Computer simulations were used to study the role of resistive couplings on flat-wave action potential propagation through a thin sheet of ventricular tissue. Unlike simulations using continuous or periodic structures, this unique electrical model includes random size cells with random spaced longitudinal and lateral connections to simulate the physiologic structure of the tissue. The resolution of the electrical model is ten microns, thus providing a simulated view at the subcellular level. Flat-wave longitudinal propagation was evaluated with an electrical circuit of over 140,000 circuit elements, modeling a 0.25 mm by 5.0 mm sheet of tissue. An electrical circuit of over 84,000 circuit elements, modeling a 0.5 mm by 1.5 mm sheet was used to study flat-wave transverse propagation. Under normal cellular coupling conditions, at the macrostructure level, electrical conduction through the simulated sheets appeared continuous and directional differences in conduction velocity, action potential amplitude and V˙_max were observed. However, at the subcellular level (10 μm) unequal action potential delays were measured at the longitudinal and lateral gap junctions and irregular wave-shapes were observed in the propagating signal. Furthermore, when the modeled tissue was homogeneously uncoupled at the gap junctions conduction velocities decreased as the action potential delay between modeled cells increased. The variability in the measured action potential was most significant in areas with fewer lateral gap junctions, i.e., lateral gap junctions between fibers were separated by a distance of 100 μm or more     

Wideband HEMT MMIC low-noise amplifier with temperaturecompensation

A wideband low-noise pseudomorphic HEMT MMIC variable-gain amplifier has been designed and fabricated. The amplifier has a nominal gain of 13 dB across the band 2-20 GHz, with gain flatness better than ±0.4 dB. The noise figure is less than 3 dB across the band 6-16 GHz. An on-chip temperature-sensing diode is used to provide a linear temperature correction which has been used to reduce the gain variation of the amplifier by a factor of 2 across the temperature range -50°C to +95°C     

Performance of asynchronous DS-CDMA system with long and shortspreading codes

The effect of spreading code length on the BER performance of an asynchronous DS-CDMA system is studied by means of Monte Carlo simulation. The probability of the crosscorrelation value between segments of long sequences is also discussed. Results indicate that the system performance with very long codes is ~1 dB worse compared to that of short CDMA codes