Soft commutation in capacitive idling converters

The capacitive idling converters derived from the Cuk, SEPIC, Zeta, and flyback topologies allow soft commutation of power switches without the need for additional circuitry, making it possible to increase the switching frequency while maintaining high efficiency     

Distributed autonomous wireless channel assignment algorithm withpower control

Local autonomous dynamic channel allocation (LADCA) including power control is essential to accommodating the anticipated explosion of demand for wireless. The authors simulate call performance for users accessing channels in a regular cellular array with a base located at the center of each hexagon. The computer model includes stochastic channel demand and a propagation environment characterized by attenuation with distance as well as shadow fading. The study of LADCA shows that distributed power control and channel access can be combined in an access management policy that achieves satisfactory system capacity and provides desired call performance. The authors report: LADCA/power control is observed to be stable alleviating a major concern about users unaware of the signal to interference problems their presence on a channel might cause to others. There can be substantial inadvertent dropping of calls in progress caused by originating calls. Modeling user time dynamics is essential. LADCA contrasts very favorably with fixed channel allocation (FCA) in a comparative example     

Experimental studies of microwave amplification in the ion-focusedregime

Studies of microwave amplification with an in-focused electron beam drawn from an induction injector are reported. A free-electron laser (FEL) operating at 9.4 GHz and employing ion-focusing within the interaction region has achieved power in excess of 30 MW at 9.4 GHz, with a beam energy of 0.8 MeV and current of 0.7 kA. Peak gain is 20 dB/m, with no saturation after 15 wiggler periods. Also reported are the first evolution and detuning data for an ion-channel laser/maser (ICL). Two shortcomings of the prematurely halted ICL studies are poor frequency discrimination and a large axial plasma gradient. Prospects for operation with an upgraded 1.6 MeV accelerator are discussed     

Pseudo-epitaxial C60 films prepared by a hot-wall method

We have used both reflection-geometry and grazing-incidence-geometry X-ray scattering to study thin films of C₆₀ evaporated onto mica substrates via a hot-wall technique. The growth mode yields close-packed C₆₀ planes, which are parallel to the substrate surface and which exhibit out-of-plane correlation lengths of 850 Å. In the film plane the C₆₀ is at best pseudo-epitaxial, with a 0.9° distribution of crystallite orientations, a 450 Å in-plane correlation length, and a 3.7% lattice mismatch, better than obtained by other thin film techniques but far from the accepted definition of single crystal thin film epitaxy.     

Prediction of chromatographic retention of metal complexes from stability constants measured by ion chromatography

Chromatographia - A theoretical model is used to predict retention times of divalent metal cations in single-column ion chromatography using one or more ligands in the eluent. Stability constants...     

Linearization of column responses by correlation chromatography. Separation improvement and reduction of undesired adsorption effects

Summary Experiments and simulations prove that correlation chromatography can greatly reduce the disadvantage of a non-linear response of the chromatographic column. A factor that has been accepted as being an important source of error in correlation or multiplex chromatography, has been shown not to be. Separations affected, improve dramatically when correlation chromatography is used, and a substantial amount of correlation noise only arises when there is a large difference in separation between a conventional chromatogram and a correlogram.A model has been developed for simulating these nonlinearities. It is shown that, especially for correlation chromatography, the simulation results match the practical measurements very well.     

Recent developments in the chemistry of stable doubly bonded germanium compounds

During the last 10 years, several compounds of the type Ge=X (X = C, Ge, N, P, S) have been isolated as monomers. The stabilization of such derivatives, which are generally highly polymerizable, was achieved by using very bulky groups both on the germanium atom and on the heteroelement X. Conjugation (particularly in a few germenes and germaimines) and intramolecular or intermolecular coordination with oxygen or nitrogen, also contributes, in some cases, to the stabilization. The X-ray analyses of such compounds show a significant bond shortening of the double bond (8–10%) relative to the corresponding single bond and a planar or nearly planar germanium. These doubly bonded germanium derivatives are usually thermally stable but must be handled in an inert atmosphere because of their high sensitivity to oxygen and moisture; they are extremely reactive, much more than the corresponding carbon analogues. Nearly quantitative additions on the double bond have been observed with electrophiles and nucleophiles, and various types of cycloadditions also occur. Except in one case, a germylene behavior has not been observed, proving that such compounds retain their structural integrity in solution.     

Mechanical properties of polyester polymer-concrete

The properties of a polymer-concrete composed of polyester matrix and locally available rock aggregate are investigated. The formula of the concrete is found by an experimental-calculation approach in such a way as to attain a closer packing of the aggregate particles on the one hand, and to ensure the needed processing characteristics (placeability) of the mix on the other. It is shown experimentally that the material obtained has a rather high compression strength. Under prolonged compression loads, the polymer-concrete exhibits a noticeable creep behavior with a linear relation between the creep strains and stresses. After the action of half the ultimate load over 3000 h, the total strains exceed the instantaneous ones by 2.0 to 2.2 times. The accumulation of irreversible strains is also observed; however, their contribution to the total strain is small. It is found that the stress-strain relation can be represented by the equation of linear hereditary creep theory.Institute of Polymer Mechanics, University of Latvia, Riga, LV-1006, Latvia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 2, pp. 147–162, March–April, 1999.     

Correlation of the leakage current and charge pumping in silicon oninsulator gate-controlled diodes

The leakage and charge pumping currents were measured in gate-controlled MOS p-i-n diodes fabricated on thin SIMOX substrates. The efficiencies of the techniques as well as their complementary features are analyzed for various experimental conditions. The interface properties of device-grade SIMOX wafers are characterized and shown to be compatible with VLSI requirements. Special interface coupling effects, which occur only in fully depleted SOI devices and modify the conventional signature of charge pumping and leakage current, are thoroughly investigated