In situ scanning tunneling microscopy of molecular assemblies of cobalt(II)- and copper(II)-coordinated tetraphenyl porphine and phthalocyanine on Au(100)

Molecules of copper(II) and cobalt(II) 5,10,15,20-tetraphenyl-21H,23H-porphine (CuTPP and CoTPP) and cobalt(II) phthalocyanine (CoPc) are spontaneously adsorbed onto reconstructed Au(100) substrate from a benzene solution containing each individual complex. In situ scanning tunneling microscopy (STM) was used to examine the real-space arrangement and the internal molecular structure of each of the individual molecules in 0.1 M HClO4 under potential control. The adsorption of CuTPP and CoTPP produced the same highly ordered square array with an intermolecular spacing of 1.44 nm on a reconstructed Au(100) surface. These molecular superlattices and the underlying reconstructed Au(100) predominated between 0 and 0.9 V, but lifting of the reconstructed Au(100) surface and elimination of the ordered adlayers occurred at more positive potentials. Molecular resolution STM revealed propeller-shaped admolecule with its center imaged as a protrusion for Co(II) and a depression for Cu(II). In contrast, the spontaneous adsorption of CoPc molecules resulted in a rapid phase transition from the reconstructed Au(100) surface to the (1 x 1) phase, coupled with the production of locally ordered, square-shaped arrays with an intermolecular distance of 1.65 nm. This molecular adlayer and the Au(100)-(1 x 1) remained unchanged when the potential was modulated between 0 and 1.0 V. These results indicate that the subtle variation in the molecular structure of adsorbate influenced not only its spatial arrangement but also the structure of the underlying Au(100) substrate.     

Effect of adlayer structure on the host-guest recognition between calcium and crown-ether-substituted phthalocyanine arrays on Au single-crystal surfaces.

Adlayers of 15-crown-5-ether-substituted cobalt(II) phthalocyanine (CoCRPc) were prepared by immersion of either Au(111) or Au(100) substrate into benzene-ethanol (9:1 v/v) mixed solutions containing CoCRPc. In situ STM imaging was carried out after transferring the CoCRPc-modified Au crystals into aqueous HClO(4) solution. The packing arrangement of the CoCRPc array on Au(111) was determined to be p(8 x 4 radical 3R - 30 degrees ), and the internal structure was clearly observed by high-resolution STM. Two adlayer structures of CoCRPc, (8 x 9) and (4 radical 5 x 4 radical 5)R26.7 degrees, were found on the Au(100)-(1 x 1) terrace. In the presence of 1 mM Ca(2+), two Ca(2+) ions were trapped in two diagonally located 15-crown-5-ether moieties of each CoCRPc molecule on Au(111), whereas encapsulation of Ca(2+) ions was not seen in the CoCRPc arrays on the Au(100)-(1 x 1) surface. The present study demonstrates that the relationship between crown moieties of CRPc and the underlying Au lattice is important in the trapping of Ca(2+) ions in crown rings.     

Anomalous excimer formation of a pyrenyl derivative having a mesogen group of alkoxycyanobiphenyl in its smectic mesophase

The direct photolysis of 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) in aqueous solution was investigated under monochromatic ultraviolet (UV) irradiation at 254 nm. ABTS was found to be directly photolyzed by UV irradiation to yield the one-electron oxidized radical, ABTS⁺, which is a blue-green colored persistent radical species that has strong visible absorption bands. The photochemical production of ABTS⁺ was strongly dependent on the solution pH and the presence of dissolved oxygen. The presence of dissolved oxygen increased the quantum yields at pH 3, whereas it inhibited the production of ABTS⁺ at pH 6.5. Spectrophotometric and spectrofluorometric data indicated that ABTS photolysis may occur as a result of the transfer of one-electron between the singlet excited state and the ground state of ABTS. Observations made during UV/H₂O₂ experiments with ABTS suggested that the dependence of the photoloysis of ABTS on the solution pH and the presence of dissolved oxygen is related to the role of the hydroperoxyl/superoxide radical (HO₂/O₂⁻), which appears to be formed via a secondary reaction of the reduced intermediate of ABTS with dissolved oxygen. The proposed photolytic reactions were supported by the observed stoichiometry between the amount of ABTS⁺ radicals produced and the amount of ABTS molecules decomposed.     

Two-dimensional supramolecular arrangements of enantiomers and racemic modification of 1,1'-binaphthyl-2,2'-dicarboxylic acid

Formation of adlayers of the optically active compound 1,1'-binaphthyl-2, 2'-dicarboxylic acid (BINAC) on iodine-modified Au (111) surfaces in perchloric acid was investigated by in situ scanning tunneling microscopy (STM). Highly ordered arrays formed on the surfaces via simple spontaneous adsorption from a solution of enantiomers or the racemic BINAC, in spite of the fact that BINAC has a three-dimensionally complex stereochemical structure. Adlayers of both enantiomers essentially shared the same enantiomorphous structure. Observed parameters of the rectangular unit cell lattice for arrays of both enantiomers of BINAC were a = 2.3 +/- 0.2 nm and b = 0.7 +/- 0.2 nm. On the other hand, racemic modification formed an entirely different adlayer, which consisted of an alternate alignment of the two enantiomers, with an oblique unit cell lattice with parameters of a = 1.2 +/- 0.2 nm, b = 0.8 +/- 0.1 nm, and 74 +/- 3 degrees . No domain composed of a single enantiomer was observed. The stronger hetero-intermolecular interactions of enantiomer couples led to the formation of an alternate arrangement in the array prepared by racemic modification.     

Practical synthesis of wybutosine, the hypermodified nucleoside of yeast phenylalanine transfer ribonucleic acid

An improved synthesis of 3-beta-D-ribofuranosylwybutine (2) has been achieved by the Wittig reaction between 4,6-dimethyl-9-oxo-3-[2,3,5-tris-O-(tert-butyldimethylsilyl)-beta-D-ribofuranosyl]-4,9-dihydro-3H-imidazo[1,2-a]-purine-7-carbaldehyde (8) and the phosphorane derived from (R)-2-[(methoxycarbonyl)amino]-3-(triphenylphosphonio)propanoate (9), followed successively by methylation, hydrogenation, and deprotection. On the other hand, the minor nucleoside wybutosine of yeast tRNA(Phe) was isolated on a scale of 80 microg by partial digestion of unfractionated tRNA (1 g) with nuclease P1, followed successively by reversed-phase column chromatography, complete digestion with nuclease P1/alkaline phosphatase, and reversed-phase HPLC. Comparison of this nucleoside with 2 has unambiguously established that the structure of wybutosine is (alphaS)-alpha-[(methoxycarbonyl)-amino]-4,6-dimethyl-9-oxo-3-beta-D-ribofuranosyl-4,9-dihydro-3H-imidazo[1,2-a]purine-7-butanoic acid methyl ester (2).     

Monolithic integration of InGaAs/InP DFB lasers and InGaAs/InAlAs MQW optical modulators

The first successful monolithic integration of InGaAsP/InP distributed feedback (DFB) lasers and InGaAs/InAlAs multiple quantum well (MQW) optical modulators using LPE (liquid phase epitaxy)/MBE (modlecular beam epitaxy) hybrid growth reported. A 14% light output modulation is observed in this integrated device.     

Comparison of coupling characteristics for several spotsize-converter-integrated laser diodes in the 1.3-/spl mu/m-wavelength region

Four types of spotsize-converter-integrated laser diodes (SS-LDs) are numerically compared from the viewpoint of the coupling characteristics to the single-mode fiber in the 1.3-/spl mu/m-wavelength region. The comparison is based on the semivectorial three-dimensional (3-D) finite-difference (FD) beam propagation method (BPM). The SS-LDs investigated here are categorized into a group with vertical tapers and a group with a combination of a lateral taper and a thin-film core. The features of the SS-LDs are clarified.     

3-D semivectorical beam propagation analysis of a spotsize-converter-integrated laser diode in the 1.3-/spl mu/m-wavelength region

Spotsize converters (SSCs), consisting of a lateral taper, thin-film core, and ridge, have been accurately designed to develop spotsize-converted laser diodes (SS-LDs) in the 1.3-/spl mu/m-wavelength region based on the 3-D semivectorial finite-difference beam propagation method (FD-BPM) with nonequidistant discretization. The effects of the structural parameters on the sum of spot-conversion loss and coupling loss between the laser diode eigenmode and single-mode fiber (SMF) eigenmode are clarified. It is shown that a small loss of around 1.5 dB can be realized by introducing nonlinear tapers to these types of SSC's. The calculated results agree well with the measured results.     

1.55 μm InGaAsP/InP laser buried in a high-resistivity epitaxiallayer on a semi-insulating InP substrate

A buried heterostructure (BH) 1.55 μm laser embedded in a high resistivity epitaxial layer on a semi-insulating substrate is described. This device has a planar surface and both a p- and an n-type electrode on the same side, facilitating integration of electronic devices. Its threshold current is typically 9 mA. Its small signal 3 dB modulation bandwidth was 14 GHz due to the reduction of device resistance and capacitance. No degradation was observed in an aging test at 50°C even after more than 3000 h     

Reliability and degradation behaviors of semi-insulating Fe-doped InP buried heterostructure lasers fabricated by movpe and dry etching technique

We clarified the degradation behavior of semi-insulating buried heterostructure lasers in which mesa structures were fabricated by RIE and then buried by MOVPE. The degradation rate and mode correlated with the quality of the BH interface. Based on the correlation, a condition for highly stable SIBH lasers was demonstrated and confirmed experimentally and statistically.