Internal modification of glass by ultrashort laser pulse and its application to microwelding

Internal modification process of glass by ultrashort laser pulse (USLP) and its applications to microwelding of glass are presented. A simulation model is developed, which can determine intensity distribution of absorbed laser energy, nonlinear absorptivity and temperature distribution at different pulse repetition rates and pulse energies in internal modification of bulk glass with fs- and ps-laser pulses from experimental modified structure. The formation process of the dual-structured internal modification is clarified, which consists of a teardrop-shaped inner structure and an elliptical outer structure, corresponding to the laser-absorbing region and heat-affected molten region, respectively. Nonlinear absorptivity at high pulse repetition rates increases due to the increase in the thermally excited free electron density for avalanche ionization. USLP enables crack-free welding of glass because the shrinkage stress is suppressed by producing embedded molten pool by nonlinear absorption process, in contrast to conventional continuous wave laser welding where cracks cannot be avoided due to shrinkage stress produced in cooling process. Microwelding techniques of glass by USLP have been developed to join glass/glass and Si/glass using optically contacted sample pairs. The strength of the weld joint as high as that of base material is obtained without pre- and post-heating in glass/glass welding. In Si/glass welding, excellent joint performances competitive with anodic bonding in terms of joint strength and process throughput have been attained.     

Representation of Multicomponent Liquid-Liquid Equilibria for Aqueous and Organic Solutions Using a Modified UNIQUAC Model

A modified form of the UNIQUAC model is presented to accurately reproducebinary phase equilibria and ternary and quaternary liquid-liquid equilibria ofaqueous and organic solutions. The model gives a good representation in thereproduction of binary coexistence curves over a wide temperature range usingtemperature-dependent parameters and of binary vapor-liquid equilibria usingtwo binary energy parameters, and in the correlation of ternary and quaternaryliquid-liquid equilibria using ternary and quaternary parameters, in addition tobinary parameters. The quaternary calculated results are compared with thoseobtained from the modified Wilson and extended UNIQUAC models.     

Small-angle X-ray scattering from a dual-component organogel to exhibit a charge transfer interaction

The structure of a dual-component organogel consisting of methyl 4,6-O-(p-aminobenzylidene)-alpha-D-glucopyranoside and methyl 4,6-O-(p-nitrobenzylidene)-alpha-D-glucopyranoside in diphenyl ether was investigated with small-angle X-ray scattering (SAXS). The individual components gelatinized the solvent to yield a colorless gel and the gel fiber consisted of the crystal, providing the crystalline peaks at the same diffraction angles as those of the solid samples. When the components were mixed in equimolar ratio and dissolved in diphenyl ether, a yellow gel was formed and the crystalline peaks disappeared. For all compositions, the SAXS profiles were well fitted by a cylinder model. The cross-sectional radius of gyration, r(c), was determined from the cross-sectional Guinier plot (qI vs q(2), where I and q are the scattering intensity and the magnitude of the scattering vector). The value of r(c) reached a minimum of 3.0 nm at the equimolar composition. By correcting the data for the thermal scattering background, we obtained the entire SAXS profile for the equimolar dual-component gel. From this profile, the radial electron density distribution was determined and the radius of the cylinder was estimated to be 2.6 nm. The electron density distribution thus obtained revealed that four gelator molecules are packed in the sectional direction. This model was consistent with the size of the gelator molecules.     

Discrimination of active sites for ethylene homologation and ethylene metathesis on molybdena silica catalyst

Active sites for ethylene homologation (3C₂H₄2C₃H₆) and ethylene metathesis (C₂H₄–¹²C₂+C₂H₄–¹³C₂2C₂H₄–¹³C₁) were discriminated by adding platinum to a reduced molybdena silica catalyst, and the former was presumed to be composed of several molybdenum species, while the latter was presumed to be composed of one molybdenum species.

---

(3C₂H₄2C₃H₆) (C₂H₄–¹²C₂+C₂H₄–¹³C₂2C₂H₄–¹³C₁) . , , .

     

Swelling behavior of PMMA-g-PEO microgel particles by organic solvents

Aqueous dispersions of cross-linked poly(methylmethacrylate)-g-poly(ethylene oxide) [PMMA-g-PEO] microgel particles have been prepared from mixtures of methylmethacrylate [MMA] and MMA-PEO macromonomer, with ethylene glycol dimethacrylate [EGDM] as the cross-linking monomer (0.2-0.5% wt%). The hydrodynamic radius of these (unswollen) microgel particles ranged from 73 to 85 nm, and the particles were essentially monodisperse with regard to their size distribution. Their swelling behavior has been investigated in the presence of both water-miscible and water-immiscible organic solvents. In general, with the addition of a water-miscible solvent, deswelling behavior was observed. However, the microgel particles were swollen on addition of 1,4-dioxan, which is a good solvent for PMMA. With water-immiscible organic solvents, the extent of swelling depended on the solvency properties of the organic liquid for PMMA. In the presence of benzene, the somewhat large increases in particle size have been attributed to weak flocculation. This has been assumed from an estimate of the van der Waals attraction energy between the swollen microgel particles.     

Selective oxygenation of amphiphilic thiacalix[3]pyridine Rh(I) diene complexes in both water and organic solvents

Thiacalix[3]pyridine (Py3S3) reacted with [Rh(diene)(mu-Cl)]2(diene = 1,5-cyclooctadiene (cod), 2,5-norbornadiene (nbd)) to give amphiphilic trigonal bipyramidal complexes, [Rh(Py3S3)(diene)]Cl. Sulfur bridges of the Py3S3 ligand in these complexes were selectively oxygenated by m-chloroperoxybenzoic acid in dichloromethane to give sulfinylcalix[3]pyridine complexes, [Rh(Py3(SO)3)(diene)]+, in which all three oxygen atoms of the SO groups occupy the equatorial positions. Structures of the complexes were analysed by X-ray crystallography and the oxidation reaction was investigated using 1H NMR spectroscopy and electrospray ionisation mass spectrometry showing that the oxygenation of the sulfur atoms in the ligand proceeded stepwise and further oxygenation of the SO moiety occurred only for the nbd complex having the smaller diene ligand resulting in [Rh(Py3(SO)2(SO2))(nbd)]+. On the other hand, the oxidation of [Rh(Py3S3)(cod)]+ by H2O2 in water did not result in oxygenation of the sulfur bridges but the cod ligand is hydroxygenated to give 1,4,5,6-eta4-2-hydroxycycloocta-4-ene-1,6-di-yl.     

Selective Debenzylation of Quaternary Salts. The Benzyl Group as an Excellent Protecting Group for Basic Nitrogen Compounds

In several synthetic problems in our laboratory it became essential to react a basic nitrogen atom with a suitable protecting group which could be subsequently removed under very mild conditions. The presence of sensitive functionality elsewhere in the molecule prevented serious consideration of most of the reagents which have been developed for dealkylation of quaternary ammonium salts^2–12. One of the most recent methods involving the highly nucleophilic system, lithium n-propylmercaptide in hexamethylphosphoramide¹² (HMPA) was thought to be most desirable but even in this instance demethylation of the quaternary system provided difficulties. For example, demethylation of the methiodide derivative of 18β-carbomethoxycleavamine (II, R [dbnd] CH₃, 3,4-double bond) provided only a 5% yield of the desired product. It was clear that a protecting group more susceptible to nucleophilic displacement was essential. During our studies directed to this end it has been established that the benzyl group satisfies the requirements in all respects. We present some of our results since they may be of interest to others involved in research on alkaloids and other basic nitrogen compounds.     

Structure and photochemical properties of (mu-alkoxo)bis(mu-carboxylato)diruthenium complexes with naphthylacetate ligands

Two new dinuclear Ru(III) complexes containing naphthalene moieties, K[Ru2(dhpta)(mu-O2CCH2-1-naph)2] (1) and K[Ru2(dhpta)(mu-O2CCH2-2-naph)2] (2) (H5dhpta = 1,3-diamino-2-hydroxypropane-N,N,N',N'-tetraacetic acid, naph-1-CH2CO2H = 1-naphthylacetic acid, naph-2-CH2CO2H = 2-naphthylacetic acid), were synthesized. Complex 2 crystallized as an orthorhombic system having a space group of Pbca with unit cell parameters a = 10.6200(5) A, b = 20.270(1) A, c = 35.530(2) A, and Z = 8. EXAFS analysis of 1 and 2 in the solid states and in solution clarified that the dinuclear structures of 1 and 2 were kept in DMSO solutions. Variable-temperature magnetic susceptibility data indicated that the two Ru(III) centers are strongly antiferromagnetically coupled as shown by the large coupling constants, J = -581 cm(-1) (1) and -378 cm(-1) (2). In the cyclic voltammograms of 1 and 2, one oxidation peak and two reduction peaks which were assigned to the redox reaction of the ruthenium moieties were observed in DMF. The large conproportionation constants estimated from the reduction potentials of Ru(III)Ru(III) and Ru(III)Ru(II) indicated the great stability of the mixed-valent state. The mixed-valent species [Ru(III)Ru(II)(dhpta)(mu-O2CCH2-R)2](2-) (R = 1-naph (6) and R = 2-naph (7)) were prepared by controlled potential electrolysis of 1 and 2 in DMF. The electronic absorption spectra of 6 and 7 were similar to that of [Ru(III)Ru(II) (dhpta)(mu-O2CCH3)2](2-) which is a typical Class II type mixed-valent complex. The fluorescence decay of 1 and 2 indicated that there are two quenching processes which come from the excimer and monomer states. The short excimer lifetimes of 1 and 2 were ascribed to the energy transfer from the naphthyl moieties to the Ru centers. The different excimer ratio between 1 and 2 suggested that the excimer formation is affected by the conformation of the naphthyl moieties in the diruthenium(III) complexes.     

Computational study on the reaction mechanism of the key thermal [4 + 4] cycloaddition reaction in the biosynthesis of epoxytwinol A

[reaction: see text] The key [4 + 4] cycloaddition in the biosynthesis of epoxytwinol A has been established by theoretical calculations to comprise of three processes. The first step is formation of the C8-C8' bond generating a biradical intermediate. Next, rotation about the C8-C8' bond occurs, and finally the C1-C1' bond is formed. Biradicals stabilized by conjugation and two hydrogen bonds are essential for realization of this rare thermal [4 + 4] cycloaddition.