An experimental limit on the coupling of a light neutral pseudoscalar particle to hadrons

Detailed results of an experiment, looking for a short-lived neutral particle decaying by ane ⁺ e ⁻ pair in the decay of the 3.68 MeV (3/2) state in¹³C, whose decay is predominantly M1, are presented. An upper limit of 7 × 10⁻⁵ has been placed on the branching ratio for decay through such a particle with a mass in the range 1.7 to 1.9 MeV/c². This leads to an upper limit of 10⁻⁶ for the coupling of such a particle to nucleons. Such a limit rules out the explanation of thee ⁺ ande ⁻ peaks recently observed in heavy ion collisions, as due to the decay of a neutral particle.     

Swift heavy ion induced modification in dielectric and microhardness properties of polymer composites

Polymer composites with different concentrations of organometallics (ferric oxalate) dispersed PMMA were prepared. PMMA was synthesized by solution polymerization technique. These films were irradiated with 120 MeV Ni¹⁰⁺ ions in the fluence range 10¹¹-5 × 10¹² ions/cm². The radiation induced modifications in dielectric properties, microhardness, structural changes and surface morphology of polymer composite films have been investigated at different concentrations of filler and ion-fluences. It was observed that electrical conductivity and hardness of the films increase with the concentration of the filler and also with the fluence. The dielectric constant (?) obeys the Universal law given by ?αfⁿ⁻¹. The dielectric constant/loss is observed to change significantly due to irradiation. This suggests that ion beam irradiation promotes the metal to polymer bonding and convert polymeric structure into hydrogen depleted carbon network. This makes the composites more conductive and harder. Surface morphology of the films has been studied using atomic force microscopy (AFM) and scanning electron microscopy (SEM). The average surface roughness is observed to increase after irradiation as revealed by AFM studies. The SEM images show the blisters type of phenomenon on the surface due to ion beam irradiation.     

Improved Nafion-based amperometric sensor for hydrogen in argon

An improved polymer electrolyte membrane fuel cell-based amperometric hydrogen sensor has been developed. The sensor operates at room temperature, and the electrolyte used in the sensor is Nafion which is a proton-conducting solid polymer electrolyte. Platinum black is used as both anode and cathode. The sensor functions as a fuel cell, H₂/Pt//Nafion//Pt/O₂, and a mechanical barrier limits the supply of hydrogen to the sensing side electrode. The limiting current is found to be linearly related to the hydrogen concentration. The sensor can be used to measure hydrogen in argon in parts per million and percentage levels. The basic principle, details of assembly, and response behavior of the sensor are discussed.     

A Non-Conforming Least Squares Spectral Element Formulation for Oseen Equations with Applications to Navier-Stokes Equations

In this article, we propose a non-conforming exponentially accurate least-squares spectral element method for Oseen equations in primitive variable formulation that is applicable to both two- and three-dimensional domains. First-order reformulation is avoided, and the condition number is controlled by a suitable preconditioner for velocity components and pressure variable. A preconditioned conjugate gradient method is used to obtain the solution. Navier-Stokes equations in primitive variable formulation have been solved by solving a sequence of Oseen type iterations. For numerical test cases, similar order convergence has been achieved for all Reynolds number cases at the cost of higher iteration number for higher Reynolds number.     

Influence of molecular weight and degree of segregation on local segmental dynamics of ordered block copolymers

Experiments in the context of block copolymer electrolyte materials have observed intriguing dependence of the ionic conductivities upon the polymer molecular weight and the degree of segregation between the blocks. Such results have been partly rationalized by invoking the spatial extent of dynamical inhomogeneities that manifest in ordered phases of block copolymers comprised of a rubbery and a glassy block. Motivated by such observations, we use molecular dynamics simulations to study the extent of spatial inhomogeneities in segmental dynamics of lamellar diblock copolymer systems where the blocks possess different mobilities. We probed the local average relaxation times and the dynamical heterogeneities as a function of distance from the interface. Our results suggest that the relaxation times of rubbery segments are strongly influenced by both the spatial proximity to the interface and the relative mobility of the glassy segments. Scaling of our results indicate that the interfacial width of the ordered phases serves as the length scale underlying the spatial inhomogeneities in segmental dynamics of the fast monomers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 859–864     

Sustainable Diels–Alder syntheses in imidazolium ionic liquids

An effective and simple protocol for the Diels–Alder reactions catalyzed and mediated by ionic liquid in conjunction with Lewis acid was studied. Diels–Alder adduct of the reaction of 1,4-benzoquinone with isoprene and 2,3-dimethyl-1,3-butadiene was obtained in good to excellent yields within the time span of 5.00–4.00 min under microwave irradiation. Due to the excellent activity of 2,3-dimethyl-1,3-butadiene as a diene, its efficiency was further analyzed by performing against four different dienophiles under various reaction conditions. The ionic liquid, 3-methyl-1-octyl-imidazolium tetrachloroaluminate mixed with Lewis acids, could be recycled and reused for consecutive cycles. The recovered ionic liquid in conjunction with Lewis acid displayed almost similar activity without any significant loss. This system is an essential upgrade and related to the reactions consuming common organic solvents at high temperatures and longer duration. Diels–Alder reactions under solventless conditions have also been investigated for the aforesaid reactions.     

Rupture of draining foam films due to random pressure fluctuations

A generalized formalism for the rupture of a draining foam film due to imposed random pressure fluctuations, modeled as a Gaussian white noise, is presented in which the flow inside the film is decomposed into a flow due to film drainage and a flow due to imposed perturbation. The evolution of the amplitude of perturbation is described by a stochastic differential equation. The rupture time distribution is calculated from the sample paths of perturbation amplitude as the time for this amplitude to equal one-half the film thickness and is calculated for different amplitudes of imposed perturbations, film thicknesses, electrostatic interactions, viscosities, and interfacial mobilities. The probability of film rupture is high for thicker films, especially at smaller times, as a result of faster growth of perturbations in a thick film due to a smaller disjoining pressure gradient. Larger viscosity, larger surface viscosity, higher Marangoni number, and smaller imposed pressure fluctuation result in slower growth of perturbation of a draining film, thus leading to larger rupture time. It is shown that a composite rupture time distribution combining short time simulation results with equilibrium distribution is a good approximation.     

β-Sitosterol Circumvents Obesity Induced Inflammation and Insulin Resistance by down-Regulating IKKβ/NF-κB and JNK Signaling Pathway in Adipocytes of Type 2 Diabetic Rats

β-sitosterol (SIT), the most abundant bioactive component of vegetable oil and other plants, is a highly potent antidiabetic drug. Our previous studies show that SIT controls hyperglycemia and insulin resistance by activating insulin receptor and glucose transporter 4 (GLUT-4) in the adipocytes of obesity induced type 2 diabetic rats. The current research was undertaken to investigate if SIT could also exert its antidiabetic effects by circumventing adipocyte induced inflammation, a key driving factor for insulin resistance in obese individuals. Effective dose of SIT (20 mg/kg b.wt) was administered orally for 30 days to high fat diet and sucrose induced type-2 diabetic rats. Metformin, the conventionally used antidiabetic drug was used as a positive control. Interestingly, SIT treatment restores the elevated serum levels of proinflammatory cytokines including leptin, resistin, tumor necrosis factor-α (TNF-α) and interleukin-6 (IL-6) to normalcy and increases anti-inflammatory adipocytokines including adiponectin in type 2 diabetic rats. Furthermore, SIT decreases sterol regulatory element binding protein-1c (SREBP-1c) and enhances Peroxisome Proliferator–activated receptor-γ (PPAR-γ) gene expression in adipocytes of diabetic rats. The gene and protein expression of c-Jun-N-terminal kinase-1 (JNK1), inhibitor of nuclear factor kappa-B kinase subunit beta (IKKβ) and nuclear factor kappa B (NF-κB) were also significantly attenuated in SIT treated groups. More importantly, SIT acts very effectively as metformin to circumvent inflammation and insulin resistance in diabetic rats. Our results clearly show that SIT inhibits obesity induced insulin resistance by ameliorating the inflammatory events in the adipose tissue through the downregulation of IKKβ/NF-κB and c-Jun-N-terminal kinase (JNK) signaling pathway.     

Harvesting of the Microalga <Emphasis Type="Italic">Nannochloropsis</Emphasis> sp. by Bioflocculation with Mung Bean Protein Extract

Harvesting microalgae from medium is a major challenge due to their small size and low concentrations. In an attempt to find a cost-effective and eco-friendly harvesting technique, mung bean (Vigna radiata) protein extract (MBPE) was used for flocculation of Nannochloropsis sp. The effects of parameters such as pH, flocculant dose, algae concentration, and mixing time were used to study the flocculation efficiency (FE) of MBPE. Optimum parameters of MBPE dosage of 20 mL L^?1 and a mixing rate of 300 rpm for 6 min achieved a FE of >92% after 2 h of settling time. MBPE-aggregated microlga flocs were characterized by microscopy. Zeta potential values decreased with increasing flocculant dose, and the values obtained were ?6.93 ± 0.60, ?5.36 ± 0.64, and ?4.44 ± 0.22 for doses of 10, 20, and 30 mL L^?1, respectively. In conclusion, MBPE flocculants used in this study are safe, nontoxic, and pollution free, so they could be used for an effective, convenient, and rapid harvesting of microalgae in an eco-friendly approach. These methods are sustainable and could be applied in industrial scale for aquaculture nutrition.