Finite element computations of viscoelastic two-phase flows using local projection stabilization

A three-field local projection stabilized (LPS) finite element method is developed for computations of a three-dimensional axisymmetric buoyancy driven liquid drop rising in a liquid column where one of the liquid is viscoelastic. The two-phase flow is described by the time-dependent incompressible Navier-Stokes equations, whereas the viscoelasticity is modeled by the Giesekus constitutive equation in a time-dependent domain. The arbitrary Lagrangian-Eulerian (ALE) formulation with finite elements is used to solve the governing equations in the time-dependent domain. Interface-resolved moving meshes in ALE allows to incorporate the interfacial tension force and jumps in the material parameters accurately. A one-level LPS based on an enriched approximation space and a discontinuous projection space is used to stabilize the numerical scheme. A comprehensive numerical investigation is performed for a Newtonian drop rising in a viscoelastic fluid column and a viscoelastic drop rising in a Newtonian fluid column. The influence of the viscosity ratio, Newtonian solvent ratio, Giesekus mobility factor, and the Eötvös number on the drop dynamics are analyzed. The numerical study shows that beyond a critical Capillary number, a Newtonian drop rising in a viscoelastic fluid column experiences an extended trailing edge with a cusp-like shape and also exhibits a negative wake phenomena. However, a viscoelastic drop rising in a Newtonian fluid column develops an indentation around the rear stagnation point with a dimpled shape.     

Superconductivity with transition temperature up to 80 K for TbSr2Cu2.7Mo0.3O7+δ

A Tb-123 phase with the composition, TbSr₂Cu_2.7Mo_0.3O_7+δ, has been synthesized in single-phase form by the solid-state reaction route. Its phase purity has been confirmed from neutron powder diffraction studies. The as-synthesized Tb-123 sample does not show superconductivity down to 5 K. On the other hand, an unusually high antiferromagnetic ordering temperature (T_N) of around 7 K is seen for the Tb moments. After 120-atm-O₂ post-annealing, bulk superconductivity is achieved in this compound with a superconducting transition temperature (T_c) of about 30 K, without any significant effect on T_N. To achieve higher oxygen content and higher T_c, the as-synthesized sample was subjected to high-pressure oxygenation, carried out in a closed cell, at 5 GPa and 400 °C in the presence of AgO as an excess-oxygen source. This sample exhibited superconductivity onset at around 80 K with a Meissner fraction larger than 10% at 5 K. Our observation of superconductivity at 80 K is the highest T_c to-date for the Tb-123 type compounds.     

Temperature variation of the Debye-Waller factors of metal and halide ions in CsCl and CsBr powders by X-ray diffraction. II. Debye-Waller factors of Cs+ and Br− ions in CsBr from room temperature to 78.2°K

The temperature variation of the Debye-Waller factors of Cs⁺ and Br⁻ ions in CsBr powder has been studied using powder X-ray diffraction. The integrated intensities of the Bragg peaks at different temperatures have been obtained. These results have been verified by structure factor least squares refinement program. Theoretical shell model lattice dynamical calculations have been done using a 7-parameter model in the harmonic approximation and the values compared with the present X-ray measurements. The observed intensities have been corrected for first order thermal diffuse scattering.     

A BiCMOS low-distortion 8-MHz low-pass filter

An 8-MHz seventh-degree elliptic-function low-pass filter is described, demonstrating an approach to low-distortion antialias filtering for high-definition video applications. The filter's performance goals are achieved through the use of circuit design principles that capitalize on the strengths of BiCMOS technology. The integrator circuits composing the filter consist of a new wideband low-distortion transconductor circuit and a unique BiCMOS Miller-stage circuit. Integrator time constants are determined by stable RC products, enabling a simplified filter calibration scheme that is insensitive to temperature-induced variations and requires no phaselock circuits. The prototype filter IC, consisting of seven integrators assembled in an active-ladder configuration, was fabricated in a 10-V, 2-μm 2.5-GHz BiCMOS technology that also features thin-film resistors and polysilicon-plate capacitors. Measured results from the calibrated filter show passband flatness of 0.2 dB, with aberrations of less than ±1 dB over a 100°C temperature range. Stopband attenuation meets its designed goal of 60 dB. Driven by 7-V_pp, differential input signals, the filter exhibits less than -72-dBc third-order intermodulation distortion products at 1 MHz. For 5-V_pp inputs at 4 MHz, third-order intermodulation spurs remain below -65 dBc     

Studies on modified anode polymer hydrogen sensor

An improved polymer electrolyte membrane (PEM) fuel cell based amperometric hydrogen sensor that operates at room temperature has been developed. The electrolyte used in the sensor is PVA/H₃PO₄ blend, which is a proton conducting solid polymer electrolyte. A blend of palladium and platinum coated on the membrane is used as anode and platinum as cathode. The sensor functions as a fuel cell, H₂/Pd-Pt//PVA-H₃PO₄//Pt/O₂, and the short circuit current is found to be linearly related to the hydrogen concentration. The present study aims at investigating the dependence of sensor behaviour on the anode composition. Paper presented at the 2nd International Conference on Ionic Devices, Anna University, Chennai, India, Nov. 28–30, 2003.     

Investigations of mean and turbulent flow characteristics of a two dimensional plane diffuser

This paper reports the investigation of mean and turbulent flow characteristics of a two-dimensional plane diffuser. Both experimental and theoretical details are considered. The experimental investigation consists of the measurement of mean velocity profiles, wall static pressure and turbulence stresses. Theoretical study involves the prediction of downstream velocity profiles and the distribution of turbulence kinetic energy using a well tested finite difference procedure. Two models, viz., Prandtl's mixing length hypothesis and k- model of turbulence, have been used and compared. The nondimensional static pressure distribution, the longitudinal pressure gradient, the pressure recovery coefficient, percentage recovery of static pressure, the variation of U _max/U _bar along the length of the diffuser and the blockage factor have been valuated from the predicted results and compared with the experimental data. Further, the predicted and the measured value of kinetic energy of turbulence have also been compared. It is seen that for the prediction of mean flow characteristics and to evaluate the performance of the diffuser, a simple turbulence model like Prandtl's mixing length hypothesis is quite adequate.List of symbols C ₁ , C ₂ ,C turbulence model constants - F _x body force - k kinetic energy of turbulence - l _m mixing length - L length of the diffuser - u, v, w rms value of the fluctuating velocity - u, v, w turbulent component of the velocity - mean velocity in the x direction - _A average velocity at inlet - U _bar average velocity in any cross section - U _max maximum velocity in any cross section - V mean velocity in the y direction - W local width of the diffuser at any cross section - x, y coordinates - dissipation rate of turbulence - _m eddy diffusivity - Von Karman constant - mixing length constant - _l laminar viscosity - _eff effective viscosity - v kinematic viscosity - density - _k effective Schmidt number for k - effective Schmidt number for - stream function - non dimensional stream function     

Investigation of the upper rim binding of triphenylpyrylium cation with p-sulfonatocalix[4]arene

The interaction of 2,4,6-triphenylpyrylium cation with p-sulfonatocalix[4]arene is studied using absorption, emission, NMR and electrochemical techniques. The increase in the absorption is observed with the increase in the concentration of p-sulfonatocalix[4]arene. The emission intensity of 2,4,6-triphenylpyrylium cation is also enhanced in the presence of p-sulfonatocalix[4]arene. The electrochemical titration reveals the presence of host–guest interaction. The NMR analysis explains the upper rim interaction of 2,4,6-triphenypyrylium cation with p-sulfonatocalix[4]arene. The mode of binding is studied using computational methods. The quantum chemical simulations reveal the binding orientation of cationic TPP with p-SC4. The calculated complexation energy (??33.19 kcal mol^?1) indicates the strong binding nature of 2,4,6-triphenylpyrylium cation with p-sulfonatocalix[4]arene.     

Antioxidant activity of phenolic compounds from extracts of Eucalyptus globulus and Melaleuca styphelioides and their protective role on D-glucose-induced hyperglycemic stress and oxalate stress in NRK-49Fcells

Phytochemicals serve as potential therapeutic agents for the prevention and treatment of diseases. In this study, we elucidate the renoprotective activity of compounds isolated from Eucalyptus globulus and Melaleuca styphelioides extracts in glucose- and oxalate-challenged NRK-49F cell model. The antioxidant potential of isolated compounds was evaluated based on their effect on antioxidant enzyme activities and lipid peroxidation levels. The results demonstrated that exposure of NRK-49F cells to glucose and oxalate stress augmented cell damage and attenuated antioxidant enzyme activities. The phytochemicals 2,2,8-trimethyl-6-formyl-chrom-3-ene-7-O-β-D-glucopyranoside, Cornusiin B and tellimagrandin I treatment restored antioxidant enzyme activity, significantly lowered lipid peroxidation levels and effectively protected cells from glucose and oxalate stress equivalent to the known antioxidant, N-acetyl cysteine. Pterocarinin A significantly reversed cellular damage owing to glucose stress. In conclusion, the compounds isolated from E. globulus and M. styphelioides showed potential cytoprotective and anti-oxidative property against glucose- and oxalate-induced oxidative stress in NRK-49F cells.     

En Route to Wide Area Emitting Organic Light-Emitting Transistors for Intrinsic Drive-Integrated Display Applications: A Comprehensive Review

Organic light-emitting transistors (OLET) evolved from the fusion of the switching functionality of field-effect transistors (FET) with the light-emitting characteristics of organic light-emitting diode (OLED) that can simplify the active-matrix pixel device architecture and hence offer a promising pathway for future flat panel and flexible display technology. This review systematically analyzes the key device/molecular engineering tactics that assist in improving the electrode edge narrow emission to wide-area emission for display applications via three different topics, that is, narrow to wide-area emission, vertical architecture, and impact of high-κ dielectric on the device performance. Source–drain electrode engineering such as symmetric/asymmetric, planar/non-planar arrangement, semitransparent nature, multilayer approach comprising charge transport, and work function modification layers enable widening the emission zone. Vertical OLET architecture offers short channel lengths with a high aperture ratio, pixel type area emission, and stable light-emitting area. Transistors utilizing high-κ dielectric materials have assisted in lowering the operating voltage, enhancing luminance and air stability. The promising development in achieving wide-area emission provides a solid basis for constructing OLET research toward display applications; however, it relies on developing highly luminescent and fast charge transporting materials, suitable semitransparent source/drain electrodes, high-κ -dielectrics, and device architectural engineering.