Structural Requirements of 1-(2-Pyridinyl)-5-pyrazolones for Disproportionation of Boronic Acids

We observed an unusual formation of four-coordinate boron(III) complexes from the reaction of 1-(2-pyridinyl)-5-pyrazolone derivatives with arylboronic acids in the basic media. The exact mechanism is not clear; however, the use of unprotected boronic acid and the presence of a bidentate ligand appeared to be the key structural requirements for the transformation. The results suggest that base-promoted disproportionation of arylboronic acid with the assistance of the [N,O]-bidentate ligation of 1-(2-pyridinyl)-5-pyrazolone should take place and facilitate the formation of pyrazole diarylborinate. Experiments to obtain a deeper understanding of its mechanism are currently underway.     

Dianthiamides A–E,Proline-Containing Orbitides from Dianthus chinensis

Orbitides are plant-derived small cyclic peptides with a wide range of biological activities. Phytochemical investigation of the whole plants of Dianthus chinensis was performed with the aim to discover new bioactive orbitides. Five undescribed proline-containing orbitides, dianthiamides A–E (1–5), were isolated from a methanolic extract of Dianthus chinensis. Their structures were elucidated by extensive analysis of 1D and 2D NMR and HRESI–TOF–MS as well as ESI–MS/MS fragmentation data. The absolute configuration of the amino acid residues of compounds 1–5 was determined by Marfey’s method. All compounds were tested for their cytotoxic activity, and dianthiamide A (1) exhibited weak activity against A549 cell line with IC₅₀ value of 47.9 μM.     

Biological deodorization of dimethyl sulfide using different fabrics as the carriers of microorganisms

Biological deodorization of dimethyl sulfide (DMS) was studied using nine unwoven fabrics as the carriers of microorganisms in a laboratory-scale deodorizing system. The activated carbon fabric FN-200CF-15 was the best packing material compared with other packing materials used, on the basis of removal rate. The maximum removal rate (Vm), evaluated by using Michaelis-Menten equation, was 2.28 g-Skg-dry fab.^-1 day^-1 in this fabric biofilter. The critical load of DMS in this fabric biofilter was dependent on space velocity (SV), determined as 0.78 and 0.66 g-Skg-dry fab.^-1 at SV 100 and 150 h^-1, respectively. Strain IM1 isolated from the carbon fabric FN-200CF-15 biofilter in modified Waksman (MW) medium successfully degraded DMS as well as hydrogen sulfide (H2S), methanethiol (MT), and dimethyl disulfide (DMDS) in batch test. The DMS removal rates (g-S cell^-1h-¹) by this strain measured in batch culture and calculated in FN-200CF-15 biofilter by the cell numbers appeared in MW medium were found almost equal, indicating that strain IM1 may be the dominant microorganism in this biofilter.     

Filler-elastomer interactions: influence of silane coupling agent on crosslink density and thermal stability of silica/rubber composites

In this work, the crosslink density and thermal stability of the silica/rubber composites treated by silane coupling agents, i.e., gamma-aminopropyl triethoxysilane (APS), gamma-chloropropyl trimethoxysilane (CPS), and gamma-methacryloxypropyl trimethoxysilane (MPS), were investigated. The chemical structures of modified silicas were studied in term of solid-state 29Si NMR spectroscopy. The crosslink density of the composites was determined by swelling measurement. The development of organic functional groups on silica surfaces treated by coupling agents led to an increase in the crosslink density of the composites, resulting in increasing final thermal stability of the composites. The composites treated by MPS showed the superior crosslink density and thermal stability in these systems. The results could be explained by the fact that the organic functional groups of silica surfaces by silane surface treatments led to an increase of the adhesion at interfaces between silicas and the rubber matrix.     

Efficient excitation energy transfer in long meso-meso linked Zn(II) porphyrin arrays bearing a 5,15-bisphenylethynylated Zn(II) porphyrin acceptor

Electronically coupled porphyrin arrays are suitable for artificial light harvesting antenna in light of a large absorption cross-section and fast excitation energy transfer (EET). Along this line, an artificial energy transfer model system has been synthesized, comprising of an energy donating meso-meso linked Zn(II) porphyrin array and an energy accepting 5,15-bisphenylethynylated Zn(II) porphyrin linked via a 1,4-phenylene spacer. This includes an increasing number of porphyrins in the meso-meso linked Zn(II) porphyrin array, 1, 2, 3, 6, 12, and 24 (Z1A, Z2A, Z3A, Z6A, Z12A, and Z24A). The intramolecular singlet-singlet EET processes have been examined by means of the steady-state and time-resolved spectroscopic techniques. The steady-state fluorescence comes only from the acceptor moiety in Z1A-Z12A, indicating nearly the quantitative EET. In Z24A that has a molecular length of ca. 217 A, the fluorescence comes largely from the acceptor moiety but partly from the long donor array, indicating that the intramolecular EET is not quantitative. The transient absorption spectroscopy has provided the EET rates in real time scale: (2.5 ps)(-1) for Z1A, (3.3 ps)(-1) for Z2A, (5.5 ps)(-1) for Z3A, (21 ps)(-1) for Z6A, (63 ps)(-1) for Z12A, and (108 ps)(-1) for Z24A. These results have been well explained by a revised F?rster equation (Sumi formula), which takes into account an exciton extending coherently over several porphyrin pigments in the donor array, whose length is not much shorter than the average donor-acceptor distance. Advantages of such strongly coupled porphyrin arrays in light harvesting and transmission are emphasized in terms of fast EET and a large absorption cross-section for incident light.     

Structural determination of hexadecanoic lysophosphatidylcholine regioisomers by fast atom bombardment tandem mass spectrometry

The structural determination of sn-1 and sn-2 hexadecanoic lysophosphatidylcholine (LPC) regioisomers was carried out using fast atom bombardment tandem mass spectrometry (FAB-MS/MS). The collision-induced dissociation (CID) of protonated and sodiated molecules produced diverse product ions due mainly to charge remote fragmentations. Based on the information obtained from the CID spectra of protonated and sodiated molecules, sn-1 and sn-2 hexadecanoic LPC isomers could be discriminated. Especially, the abundance ratio of the diagnostic ion pair [m/z 224/226] in the CID spectra of [M + H](+) ions was shown to be greatly different. Moreover, the CID-MS/MS spectra of sodium-adducted molecules for hexadecanoic LPC isomers showed characteristic product ions such as [M + Na - 103](+), [M + Na - 85](+), and [M + Na - 59](+), by which their regio-specificity can be differentiated.     

Morphology, crystallization behavior and properties of impact-modified polypropylene copolymer with or without sodium benzoate as a nucleating agent

 The morphology, crystallization behavior, and properties of an impact-modified polypropylene (PP) copolymer with or without sodium benzoate were investigated. The contents of ethylene–propylene rubber (EPR) in the reactor-made PP copolymer is about 15 wt%. For comparison, blends of PP and EPR containing the same EPR composition were prepared by melt-mixing. Morphological studies by scanning probe microscopy indicated that the impact-modified copolymer consists of three different phases, i.e., polyethylene, PP, and EPR phases, which is considerably different from the morphology of the conventional PP/EPR blend of the corresponding composition. The impact-modified PP copolymer exhibited a higher crystallization rate in terms of the lower crystallization half-time and thus higher thermal and mechanical properties, such as impact strength and hardness, than the PP/EPR blend did. The addition of sodium benzoate as a nucleating agent to the copolymer increased the crystallization rate and the mechanical properties. Received: 4 June 2001 Accepted: 31 October 2001     

Comparative molecular field analysis study of stilbene derivatives active against A549 lung carcinoma

A series of 43 stilbene derivatives that showed cytotoxicity against human lung carcinoma (A549) was analyzed using comparative molecular field analysis (CoMFA) for defining the hypothetic pharmacophore model. The polyoxylated stilbenes were found to be active inhibitors of tubulin polymerization. Several cis-stilbenes are structurally similar to combretastatins. However, the trans-stilbenes are assumed to be close to resveratrol found in grapes and have been reported to be potential cancer chemopreventive agents by modulating the initiation, promotion, and progression of the carcinogenic process. With several synthesized compounds that were evaluated for antitumor cytotoxicity against human lung tumor cells (A549), the stilbene derivatives were subjected to CoMFA. To perform systematic molecular modeling of these compounds, a conformational search was carried out based on the precise dihedral angle analysis of the lead compound (1p). The X-ray crystallographic structure of combretastatin A-1 was also used for defining the active conformers of the compounds. After determining the energy-minimized conformers of the lead compound (1p), CoMFA was performed using five different alignments. The three dimensional (3D)-quantitative structure-activity relationship study resulted in reasonable cross-validated, conventional r(2) values equal to 0.640 and 0.958, respectively.