Simultaneous nulling for monopulse array with partially adaptiveweights

A new simple method is described for synthesizing low-sidelobe sum and difference patterns with partially adaptive weights. By partially adaptive, we mean that only part of the weights are adapted for simultaneous nulling. These adaptive weights are shared by the sum and difference channels, leading to a significant reduction in the number of variable attenuators/phase shifters used, as compared to the fully adaptive implementation. An objective function is derived that yields different configurations of the shared adaptive weights. Numerical examples are presented to ascertain the efficacy of the new method for both point and extended interference     

Analysis of surface state effect on gate lag phenomena in GaAsMESFET's

A two-dimensional transient simulation of the gate lag phenomenon in GaAs MESFET's has been performed. Our results show that the charge exchanges in the population of the surface states at the ungated access region of FET's are responsible for this slow transient phenomenon. The measured “hole-trap-like” DLTS signal is directly related to the re-emission of the holes, trapped during the filling pulse. Higher gate pulse can cause more serious lag phenomenon due to larger modulation of surface charge density. Devices with shorter N⁺-gate spacing and lower surface state densities are shown to have less gate lag effect     

The input impedance of a coaxial line fed probe in a cylindricalwaveguide

Dyadic Green's functions for determining the electric and magnetic fields in a cylindrical waveguide due to a radially directed infinitesimally short electric dipole are derived. The waveguide is shorted at one end and terminated at a perfectly matched load at the other. Both TE and TM modes are considered. Based on these dyadic Green's functions, the input impedance of a coaxial line fed probe in front of the plunger is derived. The formula is expressed in a closed form. Excellent agreement between theoretical results and experimental data for exciting the TE₁₁ mode in the X band for various probe positions is observed     

Pd-Ge contact to n-GaAs with the TiW diffusion barrier

Pd-Ge based ohmic contact to n-GaAs with a TiW diffusion barrier was investigated. Electrical analysis as well as Auger electron spectroscopy and the scanning electron microscopy were used to study the contact after it was subjected to different furnace and rapid thermal annealing and different aging steps. All analyses show that TiW can act as a good barrier metal for the Au/Ge/Pd/n-GaAs contact system. A value of 1.45 × 10⁻⁶ Ω-cm² for the specific contact resistance was obtained for the Au/TiW/Ge/Pd/n-GaAs contact after it was rapid thermally annealed at 425°C for 90 s. It can withstand a thermal aging at 350°C for 40 h with its ρ_c increasing to 2.94 × 10⁻⁶Ω-cm² and for an aging at 410°C for 40 h with its ρ_c increasing to 1.38 × 10⁻⁵ Ω-cm².     

Ultrahigh and controllable drain current peak-to-valley ratio innegative resistance field-effect transistors with a strained InGaAschannel

Negative resistance field-effect transistor (NERFET) devices using either strained InGaAs or unstrained GaAs channel layers have been fabricated. The strained InGaAs channel NERFET's show strong negative differential resistance and large drain current peak-to-valley ratio. The peak-to-valley ratio of the InGaAs channel NERFET is more than 3000 at room temperature and larger than one million (10⁶) at 77 K. The peak-to-valley ratio is controllable by adjusting the collector voltage     

P-N double quantum well resonant interband tunneling diode withpeak-to-valley current ratio of 144 at room temperature

The current-voltage characteristics of the P-N double quantum well resonant interband tunneling (RIT) diodes in InAlAs-InGaAs system have been improved in this letter. The peak-to-valley current ratio (PVCR) is as high as 144 at room temperature. As we know, this is the highest room temperature PVCR ever reported in any tunneling devices. Moreover, the influence of the central barrier thickness varying from 10 Å to 30 Å on the device characteristics is also studied     

Integration of mobile vehicles for automated material handlingusing Profibus and IEEE 802.11 networks

This paper focuses on a method to integrate mobile devices such as a mobile robot, automated guided vehicle, and unmanned container transporter to form an automated material handling system. In this paper, the stationary devices are connected via a Profibus network while the mobile devices are communicating via an IEEE 802.11 wireless LAN. In order to integrate these two networks, a protocol converter is developed on a PC platform that runs two interacting processes with shared internal buffers. The protocol converter performs a role of translator between two different protocols by converting the format of a data frame. In addition to this basic conversion function, the protocol converter has a virtual polling algorithm to reduce the uncertainty involved in accessing the wireless network. Finally, the integrated network. of Profibus and IEEE 802.11 is experimentally evaluated for its data latency and throughput, which shows the feasibility of the Profibus-IEEE 802.11 network for industrial applications involving mobile devices     

An experimental and computational investigation of crack initiation and stable crack growth of ductile materials

Crack initiation and stable crack growth under monotonic loading in steels has been studied using an elastic-plastic finite element analysis. The fracture criterion used for crack initiation and stable crack growth was the critical strain energy density. In addition the shift core method for the analysis of crack extension was used. In the shift core modelling method, crack advance is simulated by moving the coordinates of the core region which surrounds the crack tip, to obtain the stiffness reduction. Simultaneously the core itself geometrically undergoes a simple rigid-body motion or translation during the crack extension. The analytically calculated and experimentally measured load for crack initiation and the subsequent stable crack growth agreed well.