Double-pass resonant Er-Raman amplifier

A new double-pass wideband Er-Raman fibre amplifier is proposed, pumped by a Raman laser oscillating through a medium consisting of Er-doped fibre and dispersion compensating fibre in series.     

Electrochemically deposited photoactive CdIn2Se4 thin films: Structural and optical studies

Electrochemical synthesis of photoactive cadmium-indium-selenide (CdIn₂Se₄) thin films at ambient temperature was reported. The nanocrystalline nature and 1:2:4 elemental chemical stoichiometric ratio for Cd, In and Se were obtained from the X-ray diffraction and energy dispersive X-ray analysis, respectively. Irregular shaped islands of about 400-500 nm in sizes composed of large number of small (∼30-40 nm) spherical grains were confirmed from the atomic force microscopy and the scanning electron microscopy images. The photoelectrochemical measurement of CdIn₂Se₄ film electrode in presence of 1 M polysulphide electrolyte revealed 0.42% photoelectrochemical device conversion efficiency, under the light illumination intensity of 80 mW/cm².     

1.6 μm band double pass fiber Raman amplifiers using Raman fiber oscillator

We propose double pass fiber Raman amplifier schemes based on Raman fiber oscillator in order to amplify optical signal with wavelengths from 1610 to 1650 nm efficiently. We experimentally demonstrate that the proposed double pass amplifier scheme has enhanced gain characteristics compared to a conventional single pass scheme. We also demonstrate a scheme for the proposed double pass amplifier to have small gain variation over the wavelength range by using two fiber Bragg gratings with different center wavelengths.     

A novel infrared absorbing structure for uncooled infrared detector

In this paper, we proposed a novel infrared absorbing structure for uncooled infrared detectors. The infrared absorber makes use of a quarter-wavelength structure composed of a dielectric layer, a protecting layer, an active layer, a supporting layer and a reflecting layer. Sputtered amorphous silicon is used as a dielectric layer because of its high refractive index. We fabricated the uncooled microbolometer with the proposed infrared absorbing structure by surface micromachining method. Then we characterized various bolometric properties such as thermal conductance, thermal time constant, responsivity and infrared absorptance. The fabricated bolometer showed the thermal conductance of 6.72 × 10⁻⁷ W/K, the thermal mass of 4.43 × 10⁻⁹ J/K, the thermal time constant of 6.6 ms and the responsivity of 7.76 × 10³ V/W at 10 Hz chopper frequency and 9.22 μA bias current. From the results, the estimated absorptance is about 80%. We expect that the proposed absorbing structure shows high infrared absorption and high performance of uncooled microbolometer.     

Fine competition and control among argentophilic,electrostatic, and π···π interactions in a molecular chair structure

The reaction of AgX (X⁻ = NO₃ ⁻, ClO₄ ⁻, or CF₃SO₃ ⁻) with 1,3-bis(3-pyridyl)tetramethyldisiloxane (L) at room temperature affords 20-membered metallacyclodimers, [Ag(L)]₂(X)₂. For the macrocyclodimer, fine competition among argentophilic, electrostatic, and π···π interaction exists. The macrocyclodimer is a unique molecular chair that tunes a transannular argentophilic interaction via the bite size of the counteranions. In order to reversibly control the argentophilic interaction, anion exchange has been accomplished. The anion exchangeability depends on the water solubility rather than the electrostatic interaction between silver(I) and anions.     

Ultraviolet photodissociation at 266 nm of phosphorylated peptide cations

Ultraviolet (UV) photodissociation (PD) experiments using 266 nm light were performed for a series of phosphopeptide cations in a Fourier transform mass spectrometer. The objective of the experiments was to determine whether 266 nm UV irradiation on the phosphopeptide cations would induce unique peptide backbone dissociation. In addition, the general behavior of the phosphate loss (?80 or ?98 Da) was monitored, particularly for those phosphopeptides with a phosphotyrosine residue that itself is a UV chromophore. For phosphopeptides with a UV chromophore, their photodissociation behavior was very similar to that of low‐energy sustained off‐resonance irradiation collisionally activated dissociation (SORI‐CAD), with a few exceptions. For example, b‐ and y‐type peptide backbone fragments were prevalent, and their dephosphorylation behavior was consistent with that of the SORI‐CAD results. For phosphoserine peptides, the loss of a phosphate group was always observed. On the other hand, for phosphotyrosine peptides, the phosphate loss was found to be dependent on the presence of a basic amino group in the sequence and the charge state of the precursor ions, in agreement with the CAD results in the literature. However, hydrogen atom loss or aromatic side chain loss, which is known to be the excited state specific fragmentation pathway, was rarely observed in our 266 nm UV PD experiments, in contrast to the previous UV PD literature (particularly at 220 nm). The mechanism for these observations is described in terms of dominant internal conversion followed by intramolecular vibrational energy redistribution (IVR). Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation and characterization of crosslinked cellulose/sulfosuccinic acid membranes as proton conducting electrolytes

A series of crosslinked polymer electrolyte membranes were prepared by blending cellulose and sulfosuccinic acid (SA) for fuel cell applications. The crosslinking reaction of membranes occurred via the esterification between –OH of cellulose and –COOH of SA, as confirmed by FT-IR spectroscopy. Both the ion exchange capacity and the proton conductivity increased in proportion to the increase of SA concentrations due to the increasing portion of charged groups in the membrane. In contrast, the water uptake linearly increased up to 25 wt.% of SA concentration, above which it decreased abruptly. The maximum behavior of water uptake may be a result of competitive effect between the increasing number of ionic sites and the increasing degree of crosslinking with the SA concentrations. Wide angle X-ray scattering also showed that the crystalline structures of cellulose disappeared upon the introduction of SA. The mechanical properties of cellulose/SA membranes, i.e., tensile strength at break and Young’s modulus, showed a maximum at 15 wt.% of SA, as revealed by universal testing machine. These membranes exhibited good thermal stability up to 250 °C, as revealed by thermal gravimetric analysis.     

Response time and vendor–assembler relationship in a supply chain

Relationships between an assembler and a vendor in a supply chain are investigated in two-period models when the assembler wants to reduce response time by incentive systems. The assembler may offer myopic or farsighted incentive contracts to the vendor, under short-term or long-term relationships. Incentive schemes, effort levels, and expected payoffs under different perspectives and relationships are examined. We find that a farsighted assembler provides the vendor with a higher incentive than a myopic assembler in the first period. A long (short)-term relationship is preferred if the value of farsightedness under a long-term relationship is greater (less) than the switching option value under a short-term relationship. We propose several sufficient conditions regarding which perspectives and relationships are preferred.