Effects of temperature and sodium carboxylate additives on mineralization of calcium oxalate in silica gel systems

Urolithiasis remains a major medical problem in China, especially in Guangdong Province in the southest of China[1]. A survey in Shenzhen city, the most southern city in China, showed the incidence of renal calculus was 4.87%, being 6.12% in the males and 4.07% in the females[2]. The prevalence of renal calculus has been more as the age advances and in the male population and so was in the less-educated population. The recurrence rate is more than 80%, with a moderate improvement by conventi…     

Detection of DNA adducts of benzo[a]pyrene using immunoelectrophoresis with laser-induced fluorescence. Analysis of A549 cells

Detection of benzo[a]pyrene diol epoxide (BPDE)-damaged DNA in a human lung carcinoma cell line (A549) has been performed using free zone affinity capillary electrophoresis with laser-induced fluorescence (LIF). Using BPDE as a model carcinogenic compound, the speed, sensitivity and specificity of this technique was demonstrated. Under free zone conditions, an antibody bound adduct was baseline-resolved from an unbound adduct in less than 2 min. The efficiencies of separation were in excess of 6 x 10(5) and 1 x 10(6) plates per meter for the antibody-bound and unbound adducts, respectively. Separation using a low ionic strength buffer permitted the use of a high electric field (830 V/cm) without the loss of resolving power. Using LIF detection, a concentration detection limit of roughly 3 x 10(-10) M was achieved for a 90-mer oligonuleotide containing a single BDPE. The use of formamide in the incubation buffer to enhance denaturing of DNA did not affect the stability of the complex between the antibody and the adducts. Using a fluorescently labeled BPDE-modified DNA adduct probe, a competitive assay was established to determine the levels of BPDE-DNA adducts in A549 cells.     

Synthesis and electrochemical properties of 2,6-bis（6-aryl-[1,2,4]- triazolo[3,4-b][1,3,4]-thiadiazole-3-yl）pyridines

By the condensation of 2,6-bis（4-amino-5-mercapto-[1,2,4]-triazoles-2）pyridine with aromatic acid in the presence of phosphorus oxychloride. Compounds of 2,6-bis（6-aryl-[1,2,4]-triazolo[3,4-b][1,3,4]-thiadiazole-3-yl）pyridines were synthesized. Their structures were confirmed by IR, ^1H NMR spectroscopies and elemental analysis. Their electrochemical behavior and cyclic voltammogram also were be studied. The results showed that they have high ionization potentials and good affinity.     

Calculation of dye-dye and dye-AgX surface interaction energies

The computation of the interaction energy between an adsorbed dye molecule and the silver halide surface has been accomplished through the use of a new code which is based upon CHEMLAB. The surface interaction energies have been computed for 1,1′-ethylene-2,2′-cyanine, a dye molecule, in both monomeric and aggregated configurations on the (100) surfaces of AgBr and AgCl. The model predicts reasonable configurations for the adsorbed dye monomer and its H- and B-aggregates. At high dye levels, the adsorption of aggregated forms is found to be favored over an adsorbed monolayer of monomeric dye molecules. Using the current interaction potentials, however, it was found that the adsorption of the dye on the AgCl (100) surface was slightly favored over that on the AgBr (100) surface. This finding, although at variance with experimental data, may be attributed to the use of an unrelaxed silver halide surface in these computations.     

Activity difference between alpha-COOH and beta-COOH in N-phosphorylaspartic acids

N-phosphorylamino acids are chemically active species that have many biomimic activities. alpha-COOH in amino acids and peptides behaviors rather differently than beta-COOH in many biochemical processes and takes a more important role in the origin of life. Activity differences between alpha-COOH and beta-COOH in the peptide formation of phosphoryl amino acids are studied by 1D, 2D NMR techniques and by ab initio and density functional theory (DFT) calculations in this paper. Phosphoryl dipeptide is formed directly from phosphoryl aspartic acids without any coupling reagents. Only the alpha-dipeptide ester is observed by 1D (1)H, (13)C, and (31)P NMR and 2D NMR. In the ab initio and DFT calculations, the pentacoordinate phosphorane intermediates containing five-membered rings are predicted to be more favored than those with six-membered rings. Both the experimental results and the theoretical calculations suggest that only the alpha-COOH group is activated by N-phosphorylation in N-phosphorylaspartic acid under mild conditions.     

Pharmacokinetic detection of penicillin excreted in urine using a totally internally reflected resonance light scattering technique with cetyltrimethylammonium bromide

A quantitative analysis method for penicillins including ampicillin (AmP), benzyl penicillin (BP), oxacillin (OA) and amoxycillin (AmO) is proposed that makes use of the totally internally reflected resonance light scattering (TIR-RLS) signal from the penicillin at the H₂O/CCl₄ interface in the presence of cetyltrimethylammonium bromide (CTMAB), and enables the pharmacokinetics of penicillin taken orally and excreted through urine to be monitored. Penicillin is coadsorbed with CTMAB at the H₂O/CCl₄ interface in neutral solution, resulting in the formation of ion associates that display greatly enhanced TIR-RLS signals (maximum at 368–372 nm). This enhanced TIR-RLS intensity was found to be proportional to the penicillin concentration over the range 0.2×10^–6 to 2.2×10^–6 mol L^–1, with limits of determination (3) of 5.0×10^–8 to 7.0×10^–8 mol L^–1. Pharmacokinetics studies performed using the present method show that the excretion of orally-taken ampicillin through urine has a half-time of 1.05 h and an excremental quantum over 8 h of 49.3%, respectively.     

Fabrication of size-tunable gold nanoparticles array with nanosphere lithography, reactive ion etching, and thermal annealing

Two-dimensional ordered arrays of gold (Au) nanoparticles were fabricated using two different variants of the nanosphere lithography technique. First, ordered arrays of polystyrene nanospheres on Si substrate were used as deposition masks through which gold films were deposited by electron beam evaporation. After the removal of the nanospheres, an array of triangular Au nanodisks was left on the Si substrate. After thermal annealing at increasing temperature, systematic shape transition of the nanostructures from original triangular Au nanodisks to rounded nanoparticles was observed. This approach allows us to systematically vary the size and morphology of the particles. In the second and novel technique, we made use of reactive ion etching to simultaneously reduce the dimension of the masking nanospheres and create arrays of nanopores on the substrate prior to the deposition of the Au films. These samples were subsequently annealed, which resulted in size-tunable and ordered Au nanoparticle arrays with the nanoparticles nested in the nanopores of the templated substrate. With the nanoparticles anchored in the nanopores, the substrate could be useful as a template for growth of other nanomaterials.     

Trinuclear to dinuclear: a radii dependence lanthanide(III) self-assembly coordination behavior of an amide-type tripodal ligand

Lanthanide nitrate complexes with the heptadentate ligand L (6-[2-(2-(diethylamino)-2-oxoethoxy)ethyl]-N,N,12-triethyl-11-oxo-3,9-dioxa-6,12-diazatetradecanamide), [Ln(2)L(NO(3))(6)] (Ln = La, Nd, Sm, Eu, Ho), have been prepared and characterized. The X-ray crystallographic studies show that, in [La(2)L(NO(3))(6)(H(2)O)].H(2)O (1), two complex cations [LaL(H(2)O)](3+) are linked by a hexanitrato anion [La(NO(3))(6)](3)(-) and form a trinuclear cation. In [Nd(2)L(NO(3))(6)(H(2)O)].CHCl(3).1/2CH(3)OH.1/2H(2)O (2), one complex cation [NdL(H(2)O)](3+) and a hexanitrato complex anion [Nd(NO(3))(6)](3)(-) are linked by a bridging NO(3)(-) to form a dinuclear complex. In both complexes, the bridging nitrate is an unusual tetradentate ligand. The metal ions are 12-coordinated in hexanitrato anions and 10-coordinated in complex cations. The chainlike supramolecular structures of La(3+) complex are parallel and have no hydrogen bonds in between, while, in the Nd(3+) complex, a chiral cavity is formed by hydrogen bonds between two adjacent supramolecular chains. These influences are further investigated by assessing the separation efficiency of L and (1)H NMR spectra of its lanthanide nitrate mixtures in solution.     

Feasibility study of the application of voltage contrast to printed circuit board

Voltage contrast (VC) has been a powerful tool for the failure analysis of integrated circuits and multichip module. As the packing density of printed circuit board (PCB) is increasing, conventional failure analysis methods to detect open or short circuit in PCBs are no longer adequate, and voltage contrast method could be a method for this purpose. However, unlike the cases of integrated circuits and multichip module, there are many areas in PCB that will produce serious charging effect when examine under the scanning electron microscope. One of the areas is the presence of solder mask on PCB.This work examines the feasibility of using voltage contrast for PCB failure analysis. Specially designed PCB is used for experimentation, and it is found that positive bias on one track and zero bias on another copper track provide a better image contrast as compared to negative and zero biases on the tracks. Also, the variation of the image contrast with different spacing between inter copper tracks has studied. It is found that the variation depends on the presence of solder mask and its location. The variation can be very different for negative bias case as compared to the positive bias case.Finite element analysis is also performed to explain the experimental observations. All the observations can be well explained by the charging effect of the solder masks. The charging effect of solder mask is indeed very significant in affecting the image contrast, and it could reduce the contrast to almost zero in some cases.     

一种新颖的应变Si沟道 pMOSFET制作技术

在应变Si沟道异质结场效应晶体管(HFET)制作过程中,引入分子束外延(MBE)低温Si(LT-Si)技术,大大减少了弛豫SiGe层所需的厚度.TEM结果表明,应变Si层线位错密度低于106cm-2.原子力显微镜(AFM)测试表明,其表面均方粗糙度小于1.02nm.器件测试结果表明,与相同条件下的体Si pMOSFET相比,空穴迁移率提高了25%.