Measurement of pH by flow injection over a wide dynamic range with PVC/neutral carrier electrodes

Two pH-sensitive neutral carrier/PVC electrodes are used simultaneously for the measurement of pH by flow injection. One of these is based on the neutral carrier tridodecylamine and the other on octadecyl isonicotinate, and together they allow the pH range 1–13 to be covered. These electrodes have been used in a very low dispersion miniature potentiometric flow cell designed specifically for use in flow injection in conjunction with a multi-channel data acquisition system. The effects of the solution ionic strength and buffer capacity on the pH measurement are discussed. A flow-injection manifold is proposed which can be used for high-accuracy pH measurements without ionic strength adjustment of the sample and for simultaneous pH and ion concentration measurements with ionic strength adjustment. This has been tested on some synthetic samples for the simultaneous determination of potassium and calcium and the measurement of pH.     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

铬天青S共振光散射法测定脱氧核糖核酸

介绍在阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)存在下阴离子染料铬天青S(CAS)共振光散射(RLS)法测定脱氧核糖核酸(DNA)的方法。在pH=5．27的六次甲基四铵一盐酸缓冲溶液中，研究了CAS—CT-MAB—yDNA体系的RLS光谱特征、影响因素和最佳反应条件。在最佳条件下，体系的RLS强度增加值△I与yDNA的浓度在50～800μg／L和1000～2000μg／L呈线性关系，其线性回归方程分别为△I=0．48c 2．56和△I=0．14c 17．86，相关系数分别为0．9997和0．9991，检出限为4．3ng／mL。该方法简便、快速，应用于合成样品中yDNA的测定，测定结果的相对标准偏差为2．93％～4．71％，回收率为97．8％～105．2％。     

Stereochemical investigations of a novel class of chiral phosphapalladacycle complexes derived from 1-[(2,5-dimethyl)phenyl]ethyldiphenylphosphine

The phosphapalladacycle derived from 1-(2',5'-dimethylphenyl)ethyldiphenylphosphine has been prepared in the optically active and racemic forms. The phosphine was synthesized as a racemate by the treatment of 1-chloro-1-(2',5'-dimethylphenyl)ethane with sodium diphenylphosphide in THF. The racemic phosphapalladacycle was subsequently obtained as the chloro-bridged dimer by the treatment of the phosphine with palladium(II) acetate followed by anion metathesis with lithium chloride. Alternatively, the phosphine could be optically resolved via metal complexation using (R,R)-bis(mu-chloro)bis{1-[1-(N,N-dimethylamino)ethyl]naphthyl-C(2),N}dipalladium(II) as the resolving agent. An efficient separation of the resulting diastereomeric complexes was achieved by silica gel chromatography. The obtained optically resolved diastereomers were next subject to chemoselective removal of the (R)-N,N-(dimethylamino)-1-(1-naphthyl)ethylaminate auxiliary by treatment with concentrated hydrochloric acid. This process yielded the binuclear dimer complexes containing the resolved eta(1)-P ligand. Cyclopalladation of the coordinated phosphine could next be performed by treatment of its eta(1)-P binuclear dimer with silver(I) hexafluorophosphate(V) in a dichloromethane/water mixture followed by treatment with lithium chloride, giving rise to a pair of optically pure enantiomeric dimers with [alpha](D) -322 and +319 degrees in CH(2)Cl(2). Despite the possibilities of the phosphine to attain a five- membered structure by ortho-palladation or a six-membered ring formation by aliphatic C-H bond activation, only the former was observed. X-ray crystallographic data of the meso dimer and an acetylacetonate derivative indicated that the phosphapalladacycle alpha-C methyl substituent was axially located. The 2-D (1)H-(1)H ROESY spectrum of the acetylacetonate derivative further revealed that the phosphapalladacycle was conformationally rigid in CDCl(3).     

Design and coordination behavior of the first selective recognition ligand of 147Pm(III)

A new amide tripodal ligand, 6-[2-(2-diethylamino-2-oxoethoxy)ethyl]-N,N,12-triethyl-11-oxo-3,9-dioxa-6,12-diazatetradecanamide (4) has been designed and synthesized for the recognition of rare earth ions. Three representative complexes of trivalent lighter (La), middle (Gd), and heavier (Er) rare earth ions with 4 were synthesized and characterized by X-ray crystallography. In the complex, the heptadentate forms a cup-like coordination cavity encapsulating the central ion. Different supramolecular complex dimers are constructed by pi-pi interaction and van der Waals forces in accordance with the lanthanide contraction. The differences of the cavity and dimer structures were investigated further by assessing the separation efficiency of in multitrace solvent extraction of rare earth ions from picrate acid solution and the ligand has the best separation factor for 147Pm(III).     

STUDY ON PREPARATION OF INORGANIC COMPOSITE MEMBRANE AND ITS PROPERTIES FOR HYDROGEN PERMEATION

IntroductionDevclopmcntoftcchniqucsforthcscparationofgascousmixturesisofgrcatimportancetochemicalindustries.Rccentadvanccsinceramicmaterialprocessinghavcstimulatedtheeffortstodcvclopccramicormctallicmcmbrancsforgasseparation.Suchmembraneswouldbesuitableforthescparationsathightemperatureatx`hichthcx`ellcstablishedorganicpol}mermcmbranescannotfunctionButmostcommercialceramicmembranesxvhichcanbcobtainedinmarkctaremicroporous(porediamcterfromO.ItoloPm)whereseparationmcchanismisgovcrncdbyKnudscnd…     

Aggregation of sodium 1-(n-alkyl)naphthalene-4-sulfonates in aqueous solution: micellization and microenvironment characteristics

In aqueous solution, the micellization and microenvironment characteristics of the micelle assemblies of three anionic surfactants, sodium 1-(n-alkyl)naphthalene-4-sulfonates (SANS), have been investigated by steady-state fluorescence and time-resolved fluorescence decay techniques using pyrene, Ru(bpy)3(2+), and 1,6-diphenyl-1,3,5-hexatriene as fluorescence probes. The critical micelle concentrations (cmc's), effective carbon atom numbers (neff's), hydrophilic-lipophilic balances (HLBs), mean micelle aggregation numbers, micropolarities, and microviscosities of these surfactant micelles have been determined. The logarithmic cmc of the alkylnaphthalene sulfonates decreases linearly with an increase in the neff. The logarithmic aggregation number of the alkylnaphthalene sulfonates increases linearly with an increase in the neff. However, in contrast to the alkylsufonates and the alkylbenzene sulfonates, the aggregation for these alkylnaphthalene sulfonate molecules is less sensitive to the increase in the neff. The micropolarity of these alkylnaphthalene sulfonate micelles is less sensitive to the increase in the alkyl chain length and is lower than that of sodium dodecyl sulfate (SDS). The microviscosity of these alkylnaphthalene sulfonate micelles increases with an increase in the alkyl chain length and is lower than those of nonionic surfactants and zwitterionic surfactants. These results suggest that naphthyl rings have a notable effect on the micellization of SANS.     

A comparative study on the structural changes in leucoemeraldine and emeraldine base upon doping by perchlorate

The changes in the structure of leucoemeraldine (LM) and emeraldine (EM) base upon doping by perchlorate anions are studied by X-ray photoelectron spectroscopy (XPS) and infrared (IR) absorption spectroscopy. In the case of LM, interactions of the amine nitrogens with the perchlorate anions result in a nitrogenonium ion structure analogous to that arising from the protonation of imine nitrogens in EM by HCl except the chloride anion in the latter has been replaced by the perchlorate anion. A small amount of partially ionic and covalent chlorine is also incorporated in the LM–perchlorate complexes. The maximum electrical conductivity that is achieved in these complexes is about 4 S/cm. In contrast, the maximum conductivity of the EM–perchlorate complexes is three orders of magnitude lower. The interactions of perchlorate anions with EM base result in the preferential disappearance of the imine units over the amine units.     

An automatic photometric method with high precision by gradually diluting a sample

An automatic photometric method to increase the precision of measurement is proposed, which is based on the injection of a very small volume of sample by rotary valve and the subsequent homogeneous mixing in a small reaction cell made of glass of the sample with a color-developing reagent gradually delivered by a syringe piston pump until the absorbance of the mixture approaches 0.434, where the lowest relative error in the concentration locates. This photometric method is characteristic of uniformly high precision, low sample and reagent consumption, and high sampling rate of 30 samples per h. The other advantages of this method include easy calibration with only one standard solution and no strict requirements on photometric components. While applied for the determination of cobalt ranging from 0.21 to 1.43 g 1(-1), the relative standard deviations are all below 0.4%.